Budget: 20000 UAH Deadline: 15 days
Good day !
I do a spa complex project with 12 years of experience.
Portfolio: www.be.net/MiaHome
Budget: 20000 UAH Deadline: 15 days
Good day !
I do a spa complex project with 12 years of experience.
Portfolio: www.be.net/MiaHome
Budget: 20000 UAH Deadline: 20 days
Good day . Ready to perform this work. I have experience in designing rooms in different styles.
Budget: 20000 UAH Deadline: 30 days
Good day !
Ready to help you, the work will be done in time and quality, with all your corrections.
I have great experience in visualization and design.
The portfolio is in the profile.
I look forward to cooperation)
Budget: 20000 UAH Deadline: 60 days
Good day Stanislav.
Experience over 11 years. I will be happy to implement the design of the spa complex. The cost of 500 UAH. by m2.
I guarantee the quality and time of implementation of my projects. Please contact us, we will discuss everything.
My portfolio is Behance
With respect, Vitaly
Budget: 19000 UAH Deadline: 15 days
Good day, I offer my services to the interior designer and architect.
Everything we need is discussed in private.
I'm waiting for your answer, thank you!
Congratulations to Vitaly!
Link to work:
Behance
Freelancehunt
Budget: 20000 UAH Deadline: 20 days
Good Morning Stay! Ready to perform 3D visualization and the necessary drawing on the project.
Portfolio of works: Freelancehunt
Behance
Budget: 20200 UAH Deadline: 17 days
Good night
Ready to work with your SPA design and visualization
I am an engineer-builder - 3D visualizer
Experience in building 14 years - visualizer 3 years
I perform 3D visualization of 4-7 rocks for each room.
Let me write, I am happy to work together.
Budget: 20000 UAH Deadline: 15 days
Good Morning, Stanislav And.
We are engaged in architectural and design projects, visualization.
We have more than 10 years of practical experience in design and architecture.
We do everything professionally and well. We have a great virtualization for you.
A lot of excellent design projects have been made. to turn.
The portfolio:
Freelancehunt
Budget: 20000 UAH Deadline: 14 days
Stanislav, greet you!
Ready to begin the task. All the details of the project will be discussed in the letter. Write, I will be happy to collaborate.
Budget: 20000 UAH Deadline: 10 days
Hello to you!
Ready to perform. Examples of work can be found in the profile. I would like to discuss details.
Write, I will be happy to work with you!
Budget: 20000 UAH Deadline: 14 days
Good Morning, Stainless!
I am pleased to perform for you the visualization of the SPA complex.
Experience in work 13 years.
Portfolio Behance
Turn to!
Budget: 20000 UAH Deadline: 14 days
Good morning, Stanislav is ready to help in implementing your project.
I made a similar order.
Budget: 20000 UAH Deadline: 12 days
Hello to you!
I can prepare everything you need according to your references. Examples of work here.
Google Drive
Write everything we will discuss
Budget: 20000 UAH Deadline: 10 days
Good morning, we perform the floor plan, the 3D model floor, and the design with a realistic visualization, with the necessity of a full project and design project, please contact us)
Budget: 20000 UAH Deadline: 14 days
I can fulfill your order with visualizations and drawings)
Experience in work 9 years)
Budget: 20000 UAH Deadline: 15 days
Good day .
I am pleased to accomplish your project.
I have great experience in design and visualization.
Many times I did the design of sauna, spa and hamam.
One of the works - Behance
Writing )
Budget: 20000 UAH Deadline: 20 days
Good day . Ready to discuss the details and begin the work. The cost is $5 square meters. More than 200 square meters. The discount
Budget: 20000 UAH Deadline: 14 days
Good day . Ready to fulfill your order. I will make detailed drawings and quality visualizations. I can provide the composition of the project and an example with a personal correspondence.
Freelancehunt
а чому не вибрана категорія "Архітектурні проєкти" ? цеж насам перед маю бути в першу чергу зроблений саме проєкт, а вже потім візуалізація і т.д.
Good day. We need to develop a concert of a technical catalog or a basic presentation for the client. Context. We are manufacturers of an aluminum system for hidden doors. Currently, wall panels made of particle board, reputable MDF, painted MDF, bamboo panels, etc., are gaining popularity in interiors... And there is often a need to create a door from the same material as the wall panels. Our product is an aluminum system for such doors. That is, it is a special aluminum profile for the door frame and door leaf, which is already cut to the size specified by the client. All holes and milling for hinges and locks are included. It only remains to cut the insert for the door to size, from the same material as the wall panel, glue it into the aluminum frame of the door leaf, and the client can implement this task. As of today, we already have clients and sales. But we want to increase sales, and we need your help. So: The product is an aluminum system for hidden doors. It is already prepared, cut to the client's size, and has all the holes for fittings (locks, hinges) and the fittings themselves. Our clients: furniture companies, private furniture makers, companies engaged in the construction and renovation of residential and commercial properties, offices, etc. That is, we work B2B. The main goal of the catalog: to inform and visually convey to potential clients that there is such a product that will help them implement the task of hidden doors with an insert of wall paneling. Show how it looks in basic form. Explain that the client does not need to have equipment for milling, cutting, and processing aluminum profiles. We take all the work with aluminum upon ourselves. The client, for example, a furniture company, only works with the material they are familiar with (particle board, MDF, that is, the same as the wall panels). Show what the final result looks like. This is not a complete technical catalog with dimensions of each wall of the profile, but rather an introduction for potential clients to our product. However, since the product is B2B, some technical details should probably be shown. I am waiting for someone who will propose a concept and implementation of this project.
A company, production team, or workshop is needed to implement a large park composition in the form of a cat and mouse as per the attached reference. We are interested not only in the development of a 3D model and drawings but in the full cycle of work: design, manufacturing of the metal frame, exterior decoration, delivery, and installation of the finished figures in the park area.Approximate dimensions of the cat — total length — 8 m; — height of the head — 3.24 m; — height at the withers — 2.34 m; — width of the body — 2.4 m; — length of the head — 1.8 m.Approximate dimensions of the mouse — total height — 1.8 m; — body length — 0.81 m; — height at the withers — 1 m; — total width with ears — 0.9–0.95 m. The figures will be installed outdoors in the park area and will be used as a decorative art object and photo zone.Expected scope of work Development of an original design for the composition based on the reference. Creation and approval of 3D models. Engineering design of load-bearing metal frames. Calculation of the stability of the structures and the method of attachment to the base. Division of the large figure into transportable modules. Manufacturing and anti-corrosion treatment of the metal frame. Formation of the volume of the figures using metal mesh or other suitable technology. Coating with high-quality artificial grass, resistant to sun, precipitation, and frost. Manufacturing of eyes, snouts, ears, and other decorative elements from weather-resistant materials. Delivery of the finished modules to the installation site. Assembly, securing, and installation in the park area. It is necessary to consider wind and snow loads, possible contact with visitors, children's safety, absence of sharp elements, water drainage, and the possibility of further maintenance. Preference will be given to contractors who have their own production or a permanent production team and can take responsibility for the entire turnkey result. In your proposal, please indicate: — which stages you can perform independently; — whether you have your own workshop and installation team; — examples of produced art objects, sculptures, or complex metal structures; — approximate cost of the entire scope of work; — approximate timelines; — terms of delivery and installation; — warranty on the metal frame and exterior coating. Installation location: [Uzhhorod, Zakarpattia region]. The reference is attached. The design must be adapted and made original, without directly copying protected characters.
I want to create a 3D model of a house for the game ETS 2, but when I add the normal map, the lighting of the object breaks. For this, SCS tools are used in Blender. It would be great if the performer has experience with exporting models to ETS 2.
A project needs to be developed for a large park composition in the shape of a cat and a mouse based on the attached visual reference. The figures will be installed outdoors in the park area and will serve as a decorative art object and photo zone. The base of the figures should be made of a sturdy metal frame. The outer covering is planned to be made of artificial grass or another weather-resistant material. Approximate dimensions of the cat: — total length — 8 m; — height of the head — 3.24 m; — height at the withers — 2.34 m; — width of the body — 2.4 m; — length of the head — 1.8 m. Approximate dimensions of the mouse: — total height — 1.8 m; — body length — 0.81 m; — height at the withers — 1 m; — total width with ears — 0.9–0.95 m. What is required from the performer: Develop an artistic 3D model of the two figures while adhering to the specified dimensions and proportions. Prepare visualizations from several angles. Design the internal supporting metal frame. Plan for dividing the large figure into modules for manufacturing, transportation, and assembly. Prepare working drawings of the metal structure with dimensions, profile cross-sections, connection nodes, and attachment points. Develop a method for securing the structure to a concrete base or foundation. Consider wind, snow, and operational loads. Provide specifications for the metal and the approximate weight of the structure. Provide recommendations for anti-corrosion protection, external covering, delivery, and assembly. The figures will be permanently outdoors, so the structure and covering must be resistant to rain, snow, frost, sun, and temperature fluctuations. Formats of the result: — 3D model in STEP, SolidWorks, Blender, or another agreed format; — drawings in PDF and DWG/DXF; — material specifications in PDF or Excel; — renders in JPG/PNG. We are looking for not just a 3D visualizer, but a specialist or team with experience in designing real metal structures. In your proposal, please indicate: — the cost of 3D modeling; — the cost of engineering design and drawings; — timelines for completion; — the software in which the work will be done; — examples of similar projects; — whether you can also organize manufacturing and assembly. The images are a reference. The final design can be adapted and made original.
Looking for a 3D specialist to develop full 3D models of products for a beauty brand. It is necessary to create a set of 3D models of beauty products for placement on the website (interactive product cards). References will be provided in personal messages - a model of a case for storing cosmetic sponges/brushes (a compact case with magnetic closure, round or cylindrical shape). The model will be used for interactive viewing on the website, so correct geometry, clean topology, and configured materials are important. Project details and references will be in personal messages. If successful, I am ready to assign further tasks, as a series of models for several product lines is planned.