Design of Metal Construction
-
2 days11 USD
326 3 1 2 days11 USD
Добрый день, занимаюсь проектирование металлоконструкций, помогу с моделированием и последующими чертежами на изделие.
-
3 days89 USD
203 3 days89 USD
Good day . Ready to perform your work, all the necessary calculations, and the cutting KM KMD (for production). I’m also working on the support universities, it’s important how and what to stick to. We only work in BIM (Tekla, Allplan). We can provide drawings in PDF, DWG, IFC, etc. They are also ready to work on a permanent basis. We can discuss all the details, write in a personal message. Examples of work can be presented in a personal report. thank you
-
3 days89 USD
238 3 days89 USD
Good day . I work at Solidworks, I have experience working in the design of metal structures of different complexity. Ready for discussion.
-
3 days45 USD
435 7 0 3 days45 USD
Good day, I do drawings and 3D in scetchap I have experience in such work
-
5 days56 USD
1322 16 0 5 days56 USD
I carry out the calculation and cutting of the divisions of KM, KMD (for the manufacture of metal constructions), is the experience of performing such works. The drawing is done correctly and clearly, with all the necessary information, also for greater visibility in the drawing using the 3d nodes of the frame elements. My profile is
Freelancehunt
-
4 days22 USD
212 4 days22 USD
I work on SolidWorks. I'm glad to do this task if the deadlines are set (there's the main job)
-
10 days223 USD
151 10 days223 USD
It is a proposal for long-term cooperation. about yourself: engineer KM, KB, experience in engineering 8 years
-
1 day18 USD
311 2 0 1 day18 USD
Hello to you! I have experience working as a designer, have developed various metal constructions. I will be happy to cooperate with you in this project and on a permanent basis. Price and time after the task is clarified. Go to turn!
-
10 days111 USD
6086 101 0 10 days111 USD
Good day there are examples of work with the nails on the coatings, calculation so the price and time after what is needed
-
3 days42 USD
1592 17 1 3 days42 USD
I often do such a job for two Lviv firms, examples in the portfolio are...
-
1 day11 USD
1014 8 0 1 day11 USD
Good day . I am always ready to cooperate. Interested in the details of the task, ask. I want to understand the size and complexity.
-
10 days446 USD
1028 3 0 10 days446 USD
Good day . Ready to talk. Examples in the portfolio (including the KM Garage). Projecting at the stage of KM. KMD for a separate fee.... I work in Revit with a clear software subcount of materials..
-
3 days22 USD
181 1 0 3 days22 USD
Good Morning . I do visualization and constructive solutions with calculations on load-work drawings for the construction of structures.
The final cost of the work, after the submission of the final data on the design
-
12 days334 USD
372 2 0 12 days334 USD
I will carry out drawings of metal construction for manufacture (building section). 3D visualization will be carried out in the Tekla Structures program (constructive, not architectural visualization).
The drawings are carried out in the AutoCAD program.
The static calculation of the structural elements is carried out with the selection of cuts is carried out in the Lira SAPR program.
The cost is determined after the study of the task.
-
1 day27 USD
868 4 0 1 day27 USD
Good day .
I am working on SolidWorks. The portfolio contains examples of the work done from your topic. There is information on the site. During the working activity there were many projects of pearls, stairs, roofs, roofs, doors including automatic, vessels, coats, structures for advertising lifts, etc.
If you are interested in my services, I am ready to discuss the conditions of mutually beneficial cooperation.
Write in a personal message. I will be glad to help.
-
1 day11 USD
340 2 0 1 day11 USD
Good day . Ready to execute your projects, we will receive a 3D model and a drawing package for manufacturing and installation.
The final deadlines and cost are discussed after agreement.
-
1 day45 USD
692 2 0 1 day45 USD
Hello to you. I am an engineer-design and specialist in SAPR, more than 10 years experience in 3D modeling, 2D drawing, design and analysis of structures and general engineering components. Sphere of activity: solid (including parametric) modeling of metal structures in 3D (leads, roofs, gateways, farms-precity, small architectural forms, etc.3); details in 3D; collection in 3D; - if necessary with visualization; creation of drawings. Modeling: AutoCAD and Fusion 360. Ready to create a model and drawings with the consumption of the basic material for the curtain and/or curtain over the frame for your task.
-
3 days13 USD
201 3 days13 USD
Good morning, I am interested in your project. Examples of work can be sent in a personal message.
-
2 days11 USD
75 2 days11 USD
Good afternoon, I will be happy to implement your project. The cost is that I will do this work only a second time.
-
Ви хоча б ескізи приклали, бо наосліп важко ціну та терміни вказувати!
-
Добрый день.
В данный момент - просчет и чертеж фермы металлической.
0,8*14, из двух частей 0,8*7м
верх и низ 60*80*3мм
раскосы 18шт, 60*60мм
На дальнейшее - компания занимается производством металлоконструкций и заборов (сетка, панели, металл). Возможно долгосрочное сотрудничество.
Какова стоимость разового проекта по ферме и при постоянном сотрудничестве? -
Я занимаюсь подобными металлоконструкциями (как проектами, так и изготовлением) уже больше 20ти лет и я не могу понять что требуется в данном от инженера, если у Вас уже есть размеры самой фермы и из какого профиля она состоит даже с количеством раскосов, то есть основная инженерная часть уже сделана - надо просто нарисовать красиво в 3D?
-
Курсовая или реальный проект?
-
Current freelance projects in the category Engineering
I am looking for a design engineer to develop a compact mechanism with electric drive.There is a preliminary concept for the lifting mechanism of a compact product. Since I am not a design engineer, I cannot assess how optimal the chosen scheme is. It is necessary to: evaluate the proposed concept; if it is viable — refine it; if there is a better solution —… Engineering, Object Design ∙ 3 hours 40 minutes back ∙ 6 proposals |
Lead PCB Designer Needed: 6-Layer HDI/Mixed-Signal Industrial Wearable (Strict IPC Class 3
267 USD
Project Overview: We are finalizing the SHIELD Core V1.2 — a compact (50×40×10 mm) industrial/tactical wearable device. We have a validated engineering architecture, an exploded 3D CAD model, and a finalized component list. We are looking for a senior-level PCB designer who… Engineering, Drawings & Diagrams ∙ 22 hours 45 minutes back |
Development of a working project for engineering networks of a private house 300 sq.m.
602 USD
Looking for an engineer/company to develop a working project for the engineering networks of a private house in the village of Lisnyky (Kyiv region). Necessary sections of the project: EO (Electricity): power networks, lighting, panels, grounding. HVAC (Heating and… Engineering, Architectural Design ∙ 1 day 9 hours back ∙ 3 proposals |
Project KZh cottage 1-2 floors
145 USD
Good day, the task is to create a project in AutoCAD - without Revit and 3D, monolithic sections 2 pieces, monolithic belt 2 floors, details to be discussed personally. A certified designer is needed. Engineering, Drawings & Diagrams ∙ 2 days 5 hours back ∙ 2 proposals |
Consultation of a microelectronics engineer / Embedded Developer
446 USD
We are looking for a project - electronics engineer / Embedded Developer. Needed - to develop an electronic circuit; Program several microcontrollers C/C++ / Embedded development of the logic for the operation and connection of the hardware computing unit and sensors testing… Engineering, Embedded Systems & Microcontrollers ∙ 3 days 8 hours back ∙ 2 proposals |
Kyiv