Design of the CM Angar
Size 126x35.4m, three flights - 8.6m + 8.6m + 18.2m. Step Column 6m.
Columns and farms are metal.
The profile is a profile.
Directed under the profile is Z-profile.
Examples but other flights. The image.
-
10 days445 USD
181 1 0 10 days445 USD
I perform tasks, Charges by load + work drawings of KM
Experience in design of KM, as well as the availability of a design engineer certificate
Turn to
-
15 days334 USD
555 29 2 15 days334 USD
Good day . I was interested in the offer. I have experience working with similar projects, I work as an engineer - designer for more than 5 years. I’m happy to do my job. Examples of accomplished (analogical) works can be provided to you.
-
30 days445 USD
304 1 0 30 days445 USD
Congratulations to you, Vichy!
I will develop for you a CM section for the construction of the angar. The oriented metal capacity will be 40-50kg/m2. If necessary, I can make a bonus to make a small video review of the design. (by type https://youtu.be/YpdQRDxriJ0 or https://youtu.be/yS1lXICfHUk )
The cost is low because I think there is no difference to develop an angar with a length of 30m or 126m. The calculation of the same, the volume of cracks will not much change from the length of the building.
If necessary, the implementation of a section of the foundations or other sections of the project, I can also help with this (price will be discussed separately).
I have more than 10 years of experience in developing a constructive part of the project documentation in that number of brands of KM and KZ. I developed both similar angars and refrigerator cameras of a similar design.
You can see examples of work on my website, which is shown in the profile.
Go to me with any questions. I will be glad to help you fulfill your task.
-
35 days1893 USD
502 5 0 35 days1893 USD
Good day . I am working on the CM Angara project. And then separate KMD for manufacture if necessary. As I will perform in the Tekla KM program, then from this model you can continue to make the detail of the metal constructions of the KMD. Experience in this project is 17 years. Portfolio in the profile. I will be happy to cooperate.
with respect,
by Natalie
-
30 days2227 USD
1028 3 0 30 days2227 USD
Good day . I am working in Revit. Example of the CM section in the portfolio in the profile (KM garage)
-
45 days1114 USD
172 45 days1114 USD
Good day . I can complete the full set of project documentation for the submission of the project to the operation and loading to the Portal of the Unified State Electronic System in the construction sector. If necessary, I can travel to the object.
-
30 days1114 USD
127 1 0 30 days1114 USD
Good Morning, certified engineer-designers. I am planning a KM project. Possible design and foundation.
-
31 days668 USD
107 2 0 31 days668 USD
I have experience in designing such antagonists. Three projects with an area of more than 5,000 square meters.
-
14 days1559 USD
187 14 days1559 USD
Good day . The certificate of the designer. I work as a FOP, we can do it officially and reliably. to turn.
-
35 days2561 USD
372 2 0 35 days2561 USD
I specialize in the CM section. I take to work.
Static calculations of the structural elements are performed in the Lira program. drawings in the car.
-
20 days401 USD
151 20 days401 USD
We can discuss your project. We have a great experience in doing such work.
-
За картинки в Автокаді та "статичний розрахунок в Ліра" щось мало клієнт отримає за таку ціну.
-
Current freelance projects in the category Object Design
Retouching / smoothing of the 3D model (STL) and preparation of vectors for CNC millingA one-time task is needed for cleaning and optimizing graphics for further CNC milling. We have a raw "dirty" STL file (obtained through automatic image tracing) with a lot of pixel noise and irregularities. The program you work in does not matter (Blender, ZBrush, Fusion 360,… 3D Modeling, Object Design ∙ 16 hours 58 minutes back ∙ 8 proposals |
Project of a transition plate for the installation of a bearing and shaft for a single-support generator.For a single-support generator, a project for a transition plate is required for the installation of a second bearing and a project for extending the shaft for the installation of a pulley. The diameter of the shaft is 35 mm The extension of the shaft is 150 mm Object Design, Drawings & Diagrams ∙ 1 day 8 hours back ∙ 2 proposals |
Designing parts (pads for a bag for 3D printing)
22 USD
A 3D model of a dismountable last for assembling a bag needs to be developed for subsequent printing on a 3D printer. Initial data A hand sketch with the main dimensions. The width, height, and taper parameters of the last (in the sketch photo) A DXF file with the outline of… 3D Modeling, Object Design ∙ 4 days 13 hours back ∙ 12 proposals |
Self-service vacuum cleaner
223 USD
Design development of a self-service vacuum cleaner for washing There is an old version that needs updating and redesign. A new design is needed Convenience in assembly With the placement of all parts Considering the sizes of the metal Made of stainless steel and additional… Mechanical Engineering & Instrument Making, Object Design ∙ 4 days 19 hours back ∙ 6 proposals |
Drawing of the part based on the sample and incomplete drawingGood day, dear performers! The project is from Kazakhstan. I am using as an example a drawing and photo of a finished product - a screw pile, taken from a Russian website. It is necessary to supplement the existing drawing and create a complete one with all the numbers and… Object Design, Drawings & Diagrams ∙ 6 days 12 hours back ∙ 10 proposals |
Poltava