0
0
Budget: 6000 UAH Deadline: 8 days
Good day. I have experience in completing similar projects based on the Crestron system. I am ready to execute the entire project in AutoCad. I can send examples.
16
0
Budget: 14000 UAH Deadline: 14 days
Hello, I am ready to execute engineering solutions from your technical specifications in AutoCAD. Please send the complete output data privately: the placement of endpoints and the equipment of which manufacturer to work on.
I have provided a preliminary price and timeline for communication (they may change after reviewing additional output data).
2
0
Budget: 6000 UAH Deadline: 5 days
Hello) I would be happy to take on this job, as I have the necessary experience. I guarantee quality technical documentation, having worked on projects with the placement of all electrical locations. The project will be clear with the calculation of all necessary equipment. I work in AutoCAD. All details can be discussed in private correspondence. You can also see examples of electrical plans for ceilings and walls in my portfolio 
Freelancehunt
Budget: 15000 UAH Deadline: 5 days
I am ready to perform work in Eplan, I have experience working with the program, I am ready to provide the necessary documentation, layout plan, electrical diagram, cable journals, mounting panel with equipment. An example of work is in the profile. The price and deadlines are approximate.
Budget: 15000 UAH Deadline: 15 days
Hello!
I am ready to help with the implementation of the project. Please provide all the listed input data for review.
3
0
Budget: 10000 UAH Deadline: 8 days
I have carefully reviewed the provided technical assignment and would like to clarify a number of fundamental points without which correct design is impossible.
1. Voltage 120 V
Please clarify the power source.
A voltage of 120 V is only possible if powered by an inverter / autonomous system.
If it concerns standard building electricity supply, European voltages (230/400 V) must be used.
2. Load Calculation
Even if a separate calculation section is not required, a basic load calculation is mandatory in any case, as it directly affects:
the selection of circuit breakers,
the selection of cable cross-sections,
the selection of LED drivers and power supplies.
3. LED Lighting
For correct design, it is necessary to provide:
the type of LED strip (voltage, power per meter),
the length of each zone,
the type of control (on/off or dimming).
4. Controller and Automation
Please clarify what exactly is to be controlled by the controller and what automation functions are planned (scenarios, sensors, remote control, etc.).
In the absence of scenarios and control logic, the use of a controller is impractical.
5. 0–10 V
The 0–10 V interface is used exclusively for controlling dimmable drivers.
Please confirm the necessity of dimming and the type of drivers used.
6. Sensors
Please clarify the types of sensors and their purposes (PIR, brightness, temperature, etc.), as well as their operating logic.
7. Power "from the panel"
Please clarify which panel is being referred to: the building's distribution board or the solar system.
In the case of using solar panels, the design of the inverter and batteries is a separate scope of work.
8. Automation Cabinet
I can perform the layout of the cabinet and determine its dimensions.
The selection of specific equipment is only possible after determining the architecture of the system.
Cost and Composition of the Electrical Project
The electrical project is carried out at a rate of 200 UAH per 1 m².
The electrical engineering part (EER) includes:
working electrical engineering drawings;
specification of equipment and materials;
cable journal;
layout of the electrical cabinet;
wiring diagram;
single-line diagram.
The project includes only EER and does not contain SES (solar power plants) or other related sections.
After clarifying the above points, I will be able to:
confirm the final scope of work,
propose a correct project structure,
prepare working documentation suitable for actual installation.
