Development of a 3D model of the case based on the reference
125 USD Looking for a 3D designer/modeler to create a device casing based on the provided reference (photographs).
Important:
This is not a creative task. A highly accurate 3D model is needed, replicating the shape, proportions, and appearance of the object in the photograph. Essentially — a careful recreation of the existing shape in 3D.
📌 Main requirements:
1. Accuracy of appearance
As close as possible replication of the shape based on the reference
No "improvements" or design changes
All proportions must match the image
2. Casing structure
The model must consist of two parts (top + bottom)
The casing must disassemble and assemble
Provide for connection (screws / latches — will discuss separately)
3. For 3D printing
The model must be optimized for FDM printing
If possible, without supports
The geometry must be suitable for printing (consider overhanging elements)
4. Internal space
There must be a cavity for the power bank in the bottom part of the casing
Dimensions of the power bank will be provided separately
It is important to consider:
easy installation
space for the cable/connector
5. Modular elements
Complex or protruding elements (if any) can be made as separate parts
They will be printed separately and then glued
📎 What I will provide:
Photos/reference
Approximate dimensions
Power bank dimensions
If necessary — explanations on usage
📤 Expected result:
Files in STL/CAD format
Separation into parts for printing
Model ready for printing without modifications
If you have experience preparing models specifically for 3D printing — that is a big plus.
Ready to discuss details before starting work.
Applications 1
Client's review of cooperation with Yehor Steshenko
Development of a 3D model of the case based on the referenceThe best 3D modeler I have worked with. The finished model turned out MUCH better and more functional than the reference.
I recommend this performer.
Freelancer's review of cooperation with Viktor Morozov
Development of a 3D model of the case based on the referenceI am pleased to collaborate on this project. The task turned out to be "starred" and interesting to work on. Mr. Viktor was always in touch and provided constructive criticism and comments, always open to dialogue, discussions, and suggestions. Innovation and engineering solutions were welcomed in the development. All stages of work were discussed quickly and productively, using all possible means of communication.
-
-
4 days125 USD4 days125 USD
Hello. I have experience in preparing models for 3D printing. I will perform the modeling in SolidWorks, taking into account all requests. Feel free to contact me, I will be happy to help.
-
4 days125 USD
646 6 0 4 days125 USDHello! I specialize in modeling for FDM 3D printing. I am ready to complete the task, message me privately, we will discuss.
-
7 days159 USD
1785 26 0 7 days159 USDHello, I could help with your project. I have extensive experience working in 3Ds Max and SolidWorks. For over a year, I have been involved in 3D printing on Makerbot and Witbox printers. I understand the requirements for models for printing and have repeatedly printed my own 3D models. I am skilled in using Netfabb, Makerware, and Cura, so I am confident in my abilities. I am always in touch regarding the project and take into account all requests and nuances during the execution of the work.
-
3 days125 USD
2527 5 0 3 days125 USDI have experience in modeling with precise matching, as well as experience in preparing models for 3D printing. Write to me, I will take care of it.
-
1 day147 USD
468 2 0 1 day147 USDGood day
I will create a 3D visualization for you
I can also send it so that it can be seen from all sides and rotated 360 degrees
I will be happy to collaborate
-
5 days125 USD
232 5 days125 USDGood day. I specialize in creating solid objects. I am ready to complete your order. My portfolio: https://www.artstation.com/john_golt
-
10 days374 USD
6695 77 0 1 10 days374 USDHello. I am ready to complete your task. Write to discuss all the details.
-
Winning proposal5 days125 USD
868 2 0 Winning proposal5 days125 USDHello! I am happy to help complete this model. I have experience in designing structures and enclosures for electronics, and I also have over 3 years of experience in developing models specifically for printing on an FDM printer. I have several printers for testing the model and optimization. I am ready to discuss in detail and agree on all the nuances of the model.
-
5 days125 USD
493 4 0 5 days125 USDHello! I am ready to complete your task. I have 8 years of experience in 3D, and 1.5 years of modeling for 3D printing. I have worked on both artistic models and precise ones. I will send examples in private messages, and we will discuss the details there.
-
4 days136 USD
2271 10 0 4 days136 USDGood day!
I am ready to create an exact reproduction of the case based on the reference, taking into account all requirements for 3D printing — no "creativity," just pure geometry and correct construction.
What I will do:
• maximum accurate repetition of shape and proportions
• division of the case into top/bottom with logical connection (screws/clips)
• preparation for FDM printing (minimum supports, technological geometry)
• thoughtful internal space for power bank + cables
… • separation of complex elements into individual modules for printing
At the output:
• STL / CAD files, fully ready for printing
• clean, verified model without the need for further modifications
I have experience in preparing models specifically for production, so the result will be truly suitable for printing from the first attempt.
Cost: 120€
Deadline: 3-5 days
I am ready to start immediately after receiving the references and dimensions.
-
2 days125 USD
10615 97 0 2 days125 USDMy portfolio
Behance
Ready to discuss the details...
-
4 days125 USD
529 2 0 4 days125 USDHello. I create 3D models and prepare them for printing. I have my own FDM printer, so I understand how it works. I think it is necessary to make separate parts by colors, with supports (so everything connects clearly). I can also do a test print to check the quality of the work (I will provide photos of the result). I will provide all necessary formats. I use Bambu Lab, so I can provide the settings specifically for printing in 3MF file format. If you are interested, I am ready to start working (after providing the dimensions and clarifying the details).
-
Референси 3Д моделі - тільки фото?
З урахуванням інших вимог така робота коштує набагато більше...
-
Current freelance projects in the category 3D Modeling
Model and preferably print the parts.
Hello! I need to create a drawing and preferably print several small parts. Send them via Nova Poshta. If you have a printer. 1 Part "Nozzle" Make it the same from plastic, preferably for 110-140 degrees. For convenience. This is an attachment for a mixer for a 2-component… 3D Modeling ∙ 21 minutes back |
3D visualization of a grocery store 44 sq m. (there is a ready layout and dimensions)
33 USD
It is necessary to build a 3D model of a grocery store space of 44 square meters. The layout with dimensions and shelf arrangement is ready. There are also photos of the shelves that will be there. Task: transfer everything to 3D, create realistic renders from several angles,… 3D Modeling, Interior Design ∙ 6 hours 41 minutes back ∙ 30 proposals |
3D character Ardilla for the website in WebGL
89 USD
The previous performer overestimated their capabilities - so the wish if you have never worked with WebGL, do not bid, do not waste time! No AI-generated models will pass - because optimization regarding weight is needed. This needs to be an AI agent for my project… 3D Modeling ∙ 7 hours 34 minutes back ∙ 7 proposals |
BLENDER 5.0 3D - tutoring
20 USD
Hello, I need someone to show me how to combine several actions in one 3D model using the 3D animation program "BLENDER". For example, I have two elements, and I create a separate animation for each element. I combine the animations into one and export it to a .GLB file so that… 3D Modeling ∙ 23 hours 30 minutes back ∙ 3 proposals |
AI visualization with transfer to 3D individual style
78 USD
Develop a corporate style for silicone animals Dog Cat Whale Goose Hippopotamus All with people, each person of a different type, blonde/child/brunette.. As for geometry, the top and bottom are 3D, or the bottom is flat (in… 3D Modeling, AI Art ∙ 1 day 1 hour back ∙ 10 proposals |
Lithuania