3D Render
It is necessary to create the most realistic render built into a real-of-the-art lanchaft.On the marked red rectangle will be a charging station for electric vehicles on all 22 parking spaces.30% of the seats must be carried.In places where 4 black "quadrats" will be located electrical closets (step files I will send):
There will be a charging station in front of each parking place.There are no step files, there are references only in the form of photos.Based on these photos, you need to create your own vision of these stores.11 out of 22 parking spaces to equip something similar to these stands (in the stands must be a sublime):
There are 11 things similar to this.This is one for two parking spaces, that is, it is located as follows:
On the left and right on the charging cable.This is a stand with a 42-inch screen that is set vertically.Each parking place should be equipped with a ceiling of solar panels.There is a reference to the photo:
On the corner above should be a screen on which, if the carrier is charged there, the bottom should be indicated with what power it is now charged and how much percentage is charged, for example: 77 kW - 67% (and to the power and to the percentage should be added some pictograms) If the place is free, then on this screen should be indicated what maximum power will be if the electric carrier is charged, for example: Free power up to 120 kW
The asphalt on every parking place should be more colored in green.On the first 8 starting at the bottom of the white paint card on the green background should be written CCS2 and kW:
The following 8 GB/T and kWh inscriptions:
The following 6 letters are AC.You will need the original file and screens from the sides: Top 3⁄4 from the top of the parking area Eye level Day Night With height of 3-4 meters Day Night 3⁄4 from the bottom of the parking area Eye level Day Night With height of 3-4 meters Day Night Phase Eye level Day Night With height of 3-4 meters Day Night
Current freelance projects in the category 3D Modeling
Create a visualization of the future product
We are currently creating a frame for a balloon that will be "held" by a metal fist. I am attaching photographs of the actual fist. The height of the balloon is 4.7 m, and the width is 4.2 m. The dimensions of the fist are approximately 1.9*1.9*1.9 meters in plan. I need to… 3D Modeling, Photo Processing ∙ 12 hours 44 minutes back ∙ 17 proposals |
Creation of a model and drawings of the hearth
A 3D model of a fire pit is required as shown in the photograph for further production. The model should be divided into 2 parts - the body separately and the fire pit itself made of reinforcement for the possibility of further separate scaling. The total height with the base is… 3D Modeling, Object Design ∙ 12 hours 53 minutes back ∙ 7 proposals |
Create a ready 3D model of the sign "How To Make Tea" for 3D printing (Bambu Studio)Need to create a complete 3D model based on the attached image-instruction "How To Make Tea". The final result should not just be an image, but a fully prepared model for 3D printing. Requirements: Create a 3D model of the plaque/plate according to the design from the image All… 3D Modeling ∙ 1 day 10 hours back ∙ 23 proposals |
Draw a detail in Compass
68 USD
There is a ZPN-250 loader Here it is on the manufacturer's website: https://agniy.kz/product/zernopogruzchik-navesnoj-zpn-250/ There is a complete set of drawings made in Compass (archive 116 MB) It is necessary to modify part of the loader, namely, to make a receiving hopper… 3D Modeling, Drawings & Diagrams ∙ 2 days 10 hours back ∙ 7 proposals |
Refinement of the facade design of the cafe building
83 USD
Facade correction and 3D visualization 1. Object: Reconstruction of a building for public catering (cafe), area 262 sq.m. 2. Sources: Sketch project (PDF) + working files (DWG/Revit). 3. Style: Modern (minimalism/loft), flat roof, 1 usable terrace. 4. Task and zoning (for 3… 3D Modeling, Architectural Design ∙ 2 days 20 hours back ∙ 16 proposals |
Odessa