Solder the board on EPS32
It is necessary to design the board, I will provide the general scheme, but I also need consultation from a specialist on some issues of the scheme.
The total number of elements is approximately 20.
Based on the ESP32 Wroom Dev Board.
The project will be carried out in several stages, each paid separately.
1) board for manual soldering
2) board for SMD and machine assembly
3) third stage.
Software is not needed.
Only the board and consultation on hardware.
-
2 days45 USD
240 2 days45 USD
Hello. I have some experience working with ESP32. I have also designed printed circuit boards for myself for amateur radio purposes. I will be able to lay everything out quickly and without mistakes.
-
Наведіть схему.
-
Доброго дня
-
Доброго.
-
Ось схема -
Доброго дня.
Який розмір екрану та номінали резисторів R1, R2?
Плату потрібно виготовити фізично на смд чи звичайних резисторах?
-
Проєкт буде складатися з трьох етапів:
1) плата під ручну пайку. на звичайних резистроах
2) плата на смд, під машинну пайку
3) третій етап.
Кожен оцінюється і оплачується окремо.
Зараз лише розмова про етап 1. -
З цим зрозуміло, запчастини ESP32, RX5808 та штекери ви надасте чи потрібно буде купувати для проекту?
Також потрібно знати, який буде використовуватись екран (прямокутний чи квадратний). Для електричної схеми це не потрібно, тільки для ергономіки плати. -
Плату не потрібно виготовляти, потрібно лише зробити проєкт. (CAD та GERBER файли).
Загальний вигляд прототипу я надам, розміри плати також -
Уточнена схема
-
Current freelance projects in the category Embedded Systems & Microcontrollers
Research the electronic module "pulse current generator"It is necessary to investigate the electronic block "pulse current generator." Required measurements: pulse frequency, signal shape, pulse duration, duty cycle, output voltage to the coil, current through the coil, power consumption, resistance/inductance of the coil, heating… Embedded Systems & Microcontrollers ∙ 2 days 5 hours back ∙ 1 proposal |
Current collector
22 USD
It is necessary to develop a Ring Current Collector. Data. Inner diameter 20mm Outer up to 250mm 1-channel Ethernet connector 4 channels of 25 amps 10 signal channels of 2 amps. Embedded Systems & Microcontrollers ∙ 3 days 5 hours back ∙ 1 proposal |
We need a specialist or a team to develop a complete smart home ecosystem.We need a specialist or a team to develop a complete smart home ecosystem. Project idea: to create a central device/hub that can connect various smart home devices: lighting, sockets, climate control, heating, sensors, cameras, locks, appliances, security scenarios, and other… Web Programming, Embedded Systems & Microcontrollers ∙ 3 days 7 hours back ∙ 27 proposals |
Telegram
161 USD
I am offering a job to restore access to a Telegram account. My Telegram account has been hacked, so I am looking for a specialist who can help solve this problem and restore access to the account. I am open to considering your proposals regarding the cost of services.… Embedded Systems & Microcontrollers, Apps for iOS (iPhone and iPad) ∙ 4 days 8 hours back ∙ 9 proposals |
STM32H743 + Ethernet (OpenH743I-C DevBoard)
For the DevBoard OpenH743I-C (https://arduino.ua/prod6139-plata-rozrobnika-openh743i-c-standard-stm32h7-development-board ) and the ETHERNET module based on the DP83848 chip, generate firmware to test the operation of the Ethernet module at the hardware level. Examples of the… Embedded Systems & Microcontrollers ∙ 11 days 22 hours back ∙ 5 proposals |
Dnepr