Make a CorelDRAW design for the laser cutting machine
2 USD Client's review of cooperation with freelancer
Make a CorelDRAW design for the laser cutting machineEverything is done well and well, thank you!
Freelancer's review of cooperation with Andrii Tsaruk
Make a CorelDRAW design for the laser cutting machineСпасибо за работу! Хороший заказчик. Возникающие вопросы решались легко. Буду рада дальнейшему сотрудничеству.
-
1 day4 USD
33 1 0 1 day4 USD
I have been working with laser plasma machines for 10 years. I will do it in an hour or two. I check the file in the CAM system. I calculate the length of the rise.
-
1 day2 USD
358 4 0 1 day2 USD
My greetings.
Experience in work over 15 years
Email: [email protected]
Viber: +380-955-766-322
Screenshot: Kraka-zjabla
-
1 day2 USD
354 20 0 1 day2 USD
Ready to cooperate. I work in ArtCAM, COMPAS-3D, SolidWorks, CorelDRAW, AutoCAD. I will do it within an hour.
-
1 day2 USD
1531 40 0 1 day2 USD
For the laser scratch, not only the sdr files are scratched, but also the dxf.
I have experience, have experience.
-
1 day3 USD
245 6 0 1 day3 USD
Good day, there is a lot of experience in this work ready to stop today!The !
I will do it quickly and efficiently!!The !
-
2 days4 USD
273 11 0 2 days4 USD
The price for 3 similar details, I work in the illustrator, on the exit of the eps file, properly opens under the cutting. Previously prepared for laser cutting the alphabet, what I know, write.
-
1 day3 USD
385 5 0 1 day3 USD
Good day !
I will do everything quality and quickly, worked earlier in the printing industry and not once with that faced
to turn)
-
1 day6 USD
416 8 0 1 day6 USD
Hello to you. I can make diagrams exactly the size in any program and save them in the required format (not only in the correlation, but also in the drawing program). The cost in the application is indicated for three patterns.
-
1 day4 USD
389 5 0 1 day4 USD
Hello to you.
Ready to fulfill your order.
the portfolio.
Freelancehunt
The Post.
by [email protected]
and skype.
by Evgeny66622
-
1 day2 USD
173 1 day2 USD
Good night Andrei, I will take your order.
I do in the best way, taking into account all the wishes.
-
1 day4 USD
2535 137 3 2 1 day4 USD
Ready to discuss and negate in the correl, contact
by [email protected]
Pricing Conditional
-
1 day4 USD
271 2 0 1 1 day4 USD
Good day, ready to do the work quickly and quality. Price indicated for 3 details, by complexity as in your example
-
1 day9 USD
1106 29 0 1 day9 USD
Welcome, ready to implement your project.
Qualitatively, at a minimum time.
I will offer the options and work out the selected.
by: aleksandrptushko
Post: [email protected]
Examples of my work: Freelancehunt
-
1 day11 USD
974 29 1 1 1 day11 USD
Hello to you.
I offer you my modeling and visualization services. I work on 3d Max2018+V-Ray 3.6+Corona 1.7.4, SketchUp 2017+ V-Ray 3.4, AutoCAD 2018, Archicad 21. My portfolio is http://3ddomkiev.wixsite.com/3ddom
-
1 day7 USD
1084 225 11 8 1 day7 USD
Good Morning Andrei.
I love to do your project.
I count all the wishes.
Let us cooperate
-
1 day4 USD
871 39 0 1 day4 USD
Go to turn. Great experience in this area. Examples can be seen in the portfolio or here: https://www.dropbox.com/s/hklvsjtl9dycqzs/BG_Video_laser_cutting.wmv?dl=0
The cost and time is conditional - determined by agreement
-
Вот макет 2 изделий, нужно сделать их вместе, так, чтобы получился круг (выйдет 4 изделия вместе). Потом экономно разместить их на листе 2 на 1,5 метра. (Что бы больше влезло).
На макете всё указано у сантиметрах.
Готовы к роботе или еще что-то уточнить?
-
ТРЕБОВАНИЯ К МАКЕТАМ ЛАЗЕРНОЙ РЕЗКИ И ГРАВИРОВКИ
- Отправляйте макет для порезки в векторном формате, все линии в кривых. (*.ai; *.cdr; *.eps, *dxf)
- Размер макета - в натуральную величину (1х1).
- Все линии должны быть замкнуты, а все объекты преобразованы в кривые.
- Все макеты проверяйте в режиме "каркас/wireframe" что бы не было лишних элементов.
- Заливки не должно быть. Макет следует делать только сверхтонким "абрисом/hairline".
- Если важна последовательность вырезания элементов - помечайте их разным цветом абриса.
- Толщину линии нельзя формировать увеличением абриса, а только двумя параллельными линиями.
- Текст, так же, должен быть переведен в кривую.
- Минимальное расстояние между линиями при лазерной резке на деревосодержащих материалах (фанера, дерево, бумага, картон, шпон, МДФ, ДСП и другие) - 3 мм, при гравировке 1 мм.
-
Current freelance projects in the category 3D Modeling
3D character Ardilla for the website in WebGL
89 USD
The previous performer overestimated their capabilities - so the wish if you have never worked with WebGL, do not bid, do not waste time! No AI-generated models will pass - because optimization regarding weight is needed. This needs to be an AI agent for my project… 3D Modeling ∙ 22 minutes back ∙ 2 proposals |
Adaptation of the alphabet to the Ukrainian language 3D printingNeed adaptation to Ukrainian for printing on Bambu LAB P1S printer There is an English version, the print form and parameters need to be preserved, but it should be done for the entire Ukrainian alphabet.… 3D Modeling ∙ 2 hours 8 minutes back ∙ 6 proposals |
BLENDER 5.0 3D - tutoring
20 USD
Hello, I need someone to show me how to combine several actions in one 3D model using the 3D animation program "BLENDER". For example, I have two elements, and I create a separate animation for each element. I combine the animations into one and export it to a .GLB file so that… 3D Modeling ∙ 16 hours 18 minutes back ∙ 3 proposals |
AI visualization with transfer to 3D individual style
78 USD
Develop a corporate style for silicone animals Dog Cat Whale Goose Hippopotamus All with people, each person of a different type, blonde/child/brunette.. As for geometry, the top and bottom are 3D, or the bottom is flat (in… 3D Modeling, AI Art ∙ 17 hours 48 minutes back ∙ 8 proposals |
3D Sculptor (Environment Artist)
16 USD
Looking for a 3D Sculptor (Environment Artist) I am looking for an experienced 3D sculptor to create game environment models (terrain) for 3D printing (I can explain how to do it). Attached are examples of models. You need to be able to create models of similar quality,… 3D Modeling ∙ 20 hours 34 minutes back ∙ 11 proposals |
Kyiv