Budget: 600 UAH Deadline: 1 day
Hello, I'm ready to take your job, I'll do it quickly and quality.
Budget: 600 UAH Deadline: 1 day
Hello, I'm ready to take your job, I'll do it quickly and quality.
Budget: 3000 UAH Deadline: 5 days
Hello to you!
Ready to fulfill your order for creating a 3D logo model and its animation.
Let’s work out all the details of the project.
Budget: 1000 UAH Deadline: 2 days
Good morning, there is experience in creating 3D animation, examples I provide. If they are interested in you, I would be happy to work with you.
Google Drive
Budget: 2000 UAH Deadline: 2 days
Good day ! I can perform by reference as well as as the idea of frequency can be made up of certain figures on the topic...
Behance
You have the choice of the executive!
Budget: 1000 UAH Deadline: 2 days
Good day !
I do quality
My experience in 3D can be seen in the portfolio.
I will be happy to work.
Freelancehunt
Behance
Budget: 900 UAH Deadline: 1 day
Hello to you.
I do work quickly and quality.
Great practical experience.
HTTPS://3ddomkiev.wixsite.com/website-2/7
Budget: 1234 UAH Deadline: 1 day
Hello to you! I can fulfill your order.
Examples of works
Google Drive
https://www.youtube.com/channel/UCB70pOrikOdfDSmO6ocZcpQ/videos
Budget: 2000 UAH Deadline: 5 days
Hello to you!
Ready to implement your project.
Some of my work is here: Google Drive
Budget: 8000 UAH Deadline: 7 days
Around $150-200 for a similar animation,more detailed after discussion.
Examples of animations are many.
Budget: 2100 UAH Deadline: 2 days
Hello to you.
My portfolio
Behance
Ready to discuss details
Budget: 4000 UAH Deadline: 2 days
My name is Vladimir!
I offer my services!
3D visualization and animation.
If you are interested in my offer I'm waiting for feedback!
Prices are acceptable and can be discussed individually.
I work with any form of payments.
Portfolio Google Drive
Budget: 1000 UAH Deadline: 2 days
Hi, I am ready to fulfill your order, but I would like to clarify the TZ.
Добрый день.
Вот лого, которое нужно визуализировать в 3д.
Сам объект должен состоять из мелких частиц - нулей и единиц. Материал частиц - светящееся стекло, или неоновые трубки со слабым светом светло-синего холодного электрического цвета.
Каждая частица должна незначительно колебаться на месте, создавая ощущение контролируемого хаоса.
Для соблюдения нужного визуального восприятия необходимо будет оттенять объем объекта буквально тенями или разной интенсивностью света от частиц в разных областях объекта.
Выполнение работы будет в таких этапах.
1. Визуализация объекта в 3д в любом материале. Утверждение.
2. Замена материала объекта на частицы. Утверждение.
3. Создание цикличной анимации вращения.
4. Создание отдельной анимации в качестве начала при открытии сайта. На этой анимации большая часть частиц, из которых состоит объект уже на своих местах, но 5-15% частиц вылетают из-за пределов камеры, стремясь занять свои места. Когда все частицы долетают до своих мест, объект создает легкий световой импульс и начинает вращаться (начинается основная цикличная анимация)
5. Финальный подбор оттенков света.
6. Рендер, сдача
I'm looking for a specialist to create a set of STL models for FDM 3D printing. Task: It is necessary to develop the complete Ukrainian alphabet: * A–Я * І, Ї, Є, Ґ * numbers 0–9 Requirements: * models must be suitable for FDM printing; * STL format; * it is also preferable to provide source files (Blender / Fusion 360 or another editor with the ability to scale models without losing proportions); * surface smooth, without unnecessary small elements; * uniform style for all characters. Please include in your response: * cost of work; * deadline; * examples of similar works (if available).
We are looking for a specialist who professionally engages in optimizing high-polygon car models for GTA V. Our main task is to obtain models that combine maximum performance with the highest possible visual quality. If you can find this balance, we would be happy to establish a long-term collaboration. Main Responsibilities Performing retopology of car models. Optimizing the polygon mesh to an optimal number of triangles without noticeable loss of quality. Re-baking textures (Normal, AO, Curvature, and others) after optimization. Preserving proportions, geometry, and all key details of the car. Optimizing textures, materials, and model structure according to the requirements of GTA V. Creating LOD levels. Preparing collisions. Preparing the model fully ready for integration into GTA V. Our Expectations Practical experience in retopology and optimization of 3D car models. Proficient use of Blender or other professional 3D packages. Experience with baking PBR textures. Understanding the principles of model optimization for real-time games. Experience preparing vehicles specifically for GTA V will be a significant advantage. Understanding the specifics of LOD, collisions, materials, textures, and the limitations of the GTA V engine. Ability to work quickly without sacrificing quality. What We Provide Source car models. Constant workflow. Long-term collaboration. Competitive payment depending on the complexity of the model and quality of execution. Important For us, quality and speed are equally important. The final result must be maximally optimized for GTA V, have clean topology, optimized textures, correctly configured materials, while preserving the appearance of both the exterior and interior of the car as much as possible. We are looking for a specialist who can regularly prepare high-quality models without the need for additional revisions after submission. Please propose a cost per car and indicate the time frame in which you can complete the work.
A case for the printed circuit board needs to be made, optimized for 3D printing (I mean to consider shrinkage, I will be printing with PETG plastic). The case should consist of 2 parts and be screwed together with M3 screws (with a place for a nut on the other side). Photos of the actual board and the step file are attached in the announcement. The only difference between the model and the board is the LEDs; they have a diameter of 5mm and are soldered in such a way that the center of the LED lens is aligned with the center of the button. USB_CAN_SD_F103.step.png - this is the step file, the .png needs to be removed from the name (otherwise it cannot be added to the announcement). I expect an assembly from the attached step file and the case with 2 parts - so that the functionality can be checked without printing.
Welcome! The company Adaptis needs to update graphic materials for A+ content on our website and on Amazon. We already have a fully prepared design for A+ content (cards, banners, infographics), but they depict a different shape of our product. We have changed the product design and now have its new 3D model. The main task is to create realistic renders of the new product shape and carefully "fit" them into the existing banners instead of the old shape. And immediately your cases
First render — a close-up of the entrance group to the building and the adjacent landscaping. Add people to make the scene more lively and attractive through quality lighting, greenery, flowers, and detailed textures. Second render — a general view of the courtyard with landscaping elements. Show adults and children relaxing in the area. Use bright sunlight to create a positive and optimistic atmosphere. Add beautiful decorative plants. If there are playgrounds or sports areas in the visualizations, use the same models as in the previous visualizations. General wishes: Create bright, rich, and expressive images. Maximize the perception of the renders through quality lighting. Add more decorative details, greenery, and landscaping elements. Make the visualizations as pleasant, lively, and presentable as possible. I will add the scene in private messages.