Creation of a Gerber file
57 USD It is required to design a printed circuit board (Gerber file). Essentially, it is not even a Gerber but a simple layout based on the description.
The board is for esp32 and pads for the necessary pins. A total of 2 such boards are needed. That is, the board has ONLY the controller and the circuitry for power supply. At the edges of the board, there are pads with labeled entry points.
I would like to complete this in 3 days.
Client's review of cooperation with Aleksandr A.
Creation of a Gerber fileQuick and high-quality work. I will reach out again. I recommend!
Freelancer's review of cooperation with Viktor Morozov
Creation of a Gerber fileWe worked well, the project is successfully completed.
-
Winning proposal1 day57 USDWinning proposal1 day57 USD
Good day.
I can do it in KiCAD or EasyEDA in a day.
P.S. If another CAD is needed, it is not a problem.
-
2 days57 USD
250 1 0 2 days57 USDHello!
I can complete the task of creating a printed circuit board for ESP32 with the necessary pin connections and power wiring. I understand that essentially a simple layout is needed with labeled pins and preparation for a Gerber file, without unnecessary components.
I am ready to:
make 2 boards according to the description;
label all input points/pins along the edges of the board;
…
complete it within 3 days;
provide the schematic in a convenient format for further manufacturing (Gerber/PCB).
I have experience working with ESP32 and developing simple boards for power and signals, so I guarantee clear and neat work.
I am ready to start immediately after the confirmation of the technical specifications.
-
1 day57 USD
745 6 0 1 day57 USDGood day! I will complete the assigned task within the specified time, and as a bonus, I will provide a BOM and a coordinate sheet. Also, if necessary, I will help order the manufacturing in China.
-
1 day57 USD
2114 6 0 1 day57 USDI can do it today. Do you have a "bare" esp32 board? You can write for preliminary clarification and I will show you what I can do.
-
1 day57 USD
475 2 0 1 day57 USDready to help you out with this
have huge experience working in full stack
will send you previous work to make sure we match
Current freelance projects in the category Drawings & Diagrams
Shop drawings (working drawings) of Reynaers MasterLine 8 / MasterPatio aluminum windows and doorsWhat needs to be done: develop a set of working/installation drawings (shop drawings) and detailed drawings of positions for the project of glazing with Reynaers MasterLine 8 aluminum systems (windows — fixed and tilt-and-turn, hinged doors) and Reynaers MasterPatio… Drawings & Diagrams ∙ 2 days 15 hours back ∙ 2 proposals |
Need a certificate "Safety of Operation..."Our project organization is looking for a design engineer (electrician) with a valid qualification certificate for a one-time subcontract. Task: Verification of the completed project of the commercial accounting organization (POKOEE) and signing of the title sheet/schemes.… Engineering, Drawings & Diagrams ∙ 2 days 17 hours back |
Development of a project for the reconstruction of the electrical supply of a private complex of buildings
223 USD
Develop a project for the reconstruction of the power supply of the complex of buildings. Add Input 2 networks (technical specifications received), correct the deficiencies of the previous power distribution scheme through the phased introduction of loads: swimming pool, sauna,… Drawings & Diagrams ∙ 2 days 17 hours back ∙ 2 proposals |
Schematic and PCB design
89 USD
It is a simple fan controller schematic. I will provide a hand-drawn sketch of the schematic. You need to create the schematic in KiCad and implement the PCB design. Add the implementation of a small Buck converter to the schematic. Details will be discussed further along the… Embedded Systems & Microcontrollers, Drawings & Diagrams ∙ 3 days 10 hours back ∙ 8 proposals |
Water Supply and Sewerage Design Engineer (WSS, Revit)
What is important for us: ✔️ Experience in design for at least 2 years. ✔️ Knowledge of Revit — the main working tool, knowledge of AutoCAD is preferred. ✔️ Modeling fire extinguishing systems in Revit (will be a plus). ✔️ Knowledge of AutoCAD will be a plus. Your main tasks:… Engineering, Drawings & Diagrams ∙ 3 days 17 hours back ∙ 2 proposals |
Lithuania