STM32 depth control.

Embedded Systems & Microcontrollers, Engineering — incorrectly specified categories?

Project translated automatically. Log in or register, to view the original Good day .You need a project manager.The depth control station.The fee is ready and dissolved.You only need software.Processor STM32F104.The 2ndWorking with 2 encoders.One to measure the depth of drop, the other an encoder to manage the menu.3 .Display of SSD1309 and 4.ACP ASD1015 and 5.Tensator HX711 6 .3 buttons + 2 releas.7 .Data recording on the SD card.8thConnect to the PC via USB.How the system works.The fee is set on the leaf, Monitoring the depth of descent (encoder), weight( tensor) and pressure( pressure sensors 4-20).Before the drop, the operator settles the depth, when approaching which the syrene works (conduct the relay).Also, the operator sets the maximum weight, if the weight is exaggerated, it performs the relay that is removed by the frequency converter of the leaf.In order to set up, an encoder with a + 3 button is used.This is done so that you can work without a PC.The PC will be connected via USB, using the upper level program you can also set the system.The device must record all data on the SD card.When connected to the PC, synchronize time.If the network power fails, then the system will work from the battery, the battery voltage determines the ACP and leaves it on the screen.13:51To visualize the data on the display I use the U8g2lib library, it supports SSD1309 and many other chips.I use it in the Arduino IDE environment.If you can use this library then I’ll be able to help you visualize the data on the display as I already have some preparations.Add a file with detailed TZ.

Proposals 4 Discussions 4

Aleksandr A.

50 0

Budget: 6000 UAH Deadline: 7 days

Good day .
The task is quite reasonable.
It is shown how your switch uses a USB-UART converter to get to the PC. If the USB is connected to the IC, then add to the value of 1000 UAH.
For standing, I have an MK, a doubtful display, an encoder.

Viktor Kurilyak

0 0

Projects -
Rating -
Rating 240

Budget: 40000 UAH Deadline: 45 days

I have great experience in the development of microcontrolers.
I can perform the project in good and timely manner.

Yaroslav V.

0 0

Projects -
Rating -
Rating 220

Budget: 10000 UAH Deadline: 22 days

Good day .
Ready to fulfill your order.
I have great experience using the STM32 controller in large and small projects.
The final price and time for execution will be agreed.