Create a 3D model (STL) of the transmitter housing for DJI Mavic 3
We need to create a 3D model of the enclosure (STL for printing), which is mounted on top of the DJI Mavic 3 and houses the video relay and radio communication modules.
Components to be placed inside the enclosure:
Skyzone SteadyView X (with screen) — 65 × 32 × 32 mm
Happymodel ES900TX — 55 × 39 × 11 mm
TBS Crossfire Nano RX — 18 × 11 × 5 mm
VTX 1.2 GHz (Flywoo or similar) — 35 × 35 × 10 mm
Li-Ion 2S Battery (2 × 18650) — approximately 65 × 40 × 20 mm
Model requirements:
The enclosure is mounted on top of DJI Mavic 3
It is necessary to implement:
Version powered by built-in 2S battery
Window/opening for the SteadyView X module screen
Ventilation holes
Outputs for 3 SMA antennas:
Front (front of the enclosure) — for 5.8 GHz patch antenna
Rear part — for 1.2 GHz antenna
Top or side part — for 868/915 MHz antenna (ES900TX)
Removable cover option (screws or latches)
Consider heat dissipation for modules: SteadyView and VTX should have adequate ventilation
example of what is needed in applications
Applications 5
-
10 days56 USD
112 10 days56 USD
Good day!
My name is Oleksandr, I am a representative of Pcsmart company.
We are engaged in the production of 3D models in three stages: modeling, printing, painting/assembly.
If you already have a ready 3D model, we can immediately calculate the cost of the product.
In case the model needs to be edited or created from scratch — we have a full-time 3D designer who will model any of your ideas for an additional fee.
The price of printing with PLA plastic: 3.5 UAH per gram. (the cost of the product depends only on the weight of the plastic used during printing).
…
We offer you our 3D printing services, as we have one of the lowest prices for printing among competitors in Ukraine, and most importantly — we do everything quickly and with quality, turnkey.
If our offer interests you — please provide any response and we will immediately calculate the cost and production time of your model.
Best regards, Oleksandr, online store manager at Pcsmart.
-
2 days67 USD
3426 75 3 2 days67 USD
Hello
Open to collaboration
I will do quality work according to the technical specifications
Contact me
-
4 days67 USD
6695 77 0 1 4 days67 USD
Hello. Ready to complete your task. Write to discuss everything further
-
4 days111 USD
500 3 1 4 days111 USD
Good day.
The task is clear.
I am engaged in 3D modeling and 3D printing.
Therefore, I can create an STL model for printing.
-
10 days67 USD
999 7 0 10 days67 USD
Hello. I can create this enclosure in Fusion 360. Do you have a drawing of the desired enclosure? Or I will create the design myself, with drawings and a model. But this work will cost more.
Model based on drawing - $30
Design from scratch, drawing, and model - $150
-
1 day91 USD
218 1 day91 USD
Good day! I have my own production of repeaters for Mavic 3, Matrice 30t, 300. We also make ground stations and various types and kinds of antennas. I can send screenshots of our work in 3D format.
-
7 days111 USD
417 1 1 7 days111 USD
Good day!!
I am interested in your task. Let's discuss the work plan, how we will do it, and at which stages to control. Price - deadline is negotiable.
-
15 days49 USD
1531 40 0 15 days49 USD
I can create models for electronic enclosures for various manufacturing technologies, including 3D printing.
Open to discussing project implementation, timeline, and cost. Contact me, I will be happy to help if the purpose matches my expectations.
-
20 days557 USD
319 2 0 20 days557 USD
Good afternoon! I can complete your order in a week and a half.
Let's discuss in private messages for more details, some points require clarification.
-
30 days601 USD
1098 3 0 30 days601 USD
Good afternoon, the task is quite not simple, but don't let the price scare you, this is a serious development
Freelancehunt
-
Доброго дня, а ця модель що у вас зараз є, які її мінуси??
Чому вирішили переробити?
-
Є сам ретранслятор, але немає STL-моделі. В наших умовах ретранслятори — це витратні матеріали: доводиться або купувати, або випрошувати.
-
deleted by moderator
-
deleted by moderator
-
Current freelance projects in the category 3D Modeling
Model and preferably print the parts.
Hello! I need to create a drawing and preferably print several small parts. Send them via Nova Poshta. If you have a printer. 1 Part "Nozzle" Make it the same from plastic, preferably for 110-140 degrees. For convenience. This is an attachment for a mixer for a 2-component… 3D Modeling ∙ 29 minutes back |
3D visualization of a grocery store 44 sq m. (there is a ready layout and dimensions)
33 USD
It is necessary to build a 3D model of a grocery store space of 44 square meters. The layout with dimensions and shelf arrangement is ready. There are also photos of the shelves that will be there. Task: transfer everything to 3D, create realistic renders from several angles,… 3D Modeling, Interior Design ∙ 6 hours 49 minutes back ∙ 30 proposals |
3D character Ardilla for the website in WebGL
89 USD
The previous performer overestimated their capabilities - so the wish if you have never worked with WebGL, do not bid, do not waste time! No AI-generated models will pass - because optimization regarding weight is needed. This needs to be an AI agent for my project… 3D Modeling ∙ 7 hours 43 minutes back ∙ 7 proposals |
BLENDER 5.0 3D - tutoring
20 USD
Hello, I need someone to show me how to combine several actions in one 3D model using the 3D animation program "BLENDER". For example, I have two elements, and I create a separate animation for each element. I combine the animations into one and export it to a .GLB file so that… 3D Modeling ∙ 23 hours 39 minutes back ∙ 3 proposals |
AI visualization with transfer to 3D individual style
78 USD
Develop a corporate style for silicone animals Dog Cat Whale Goose Hippopotamus All with people, each person of a different type, blonde/child/brunette.. As for geometry, the top and bottom are 3D, or the bottom is flat (in… 3D Modeling, AI Art ∙ 1 day 1 hour back ∙ 10 proposals |
Kramatorsk