I am completely dissatisfied with the work! Three weeks of torment and I have no strength left to explain to the person who does not hear or understand how to make effective joints. 20-30% of the drawings will have to be manually redone by us.
Here is a comparison of what was said and what the draftsman did.
Initially, the requirements were:
1) Our board comes in two thicknesses - 20 mm and 40 mm. width 150 mm
Done: 30 mm board!!!!
2) The seats are attached via brackets 40x20x20
Done: three types of brackets in different places 60x60x40, 60x60x30 with two different holes
3) The fastening of the posts is done with screws 8x60. The roof is also fastened with screws.
Done: made it on the third attempt, but did not secure the roof to the beam from above, only to the brackets to the gables.
4) Product dimensions: at least 1500x1422x1930mm
Done: 1560x1260x1740!!! I made the height and width 200 mm less. How is that possible? Specific dimensions were provided at the beginning.
5) The floor frame was made incorrectly and in my own way, even after we drew it by hand on paper and sent instructions on how to do it.
6) The instructions were not made according to our requirements (an example was sent at the beginning).
7) The specification was not made according to our requirements (an example was sent at the beginning).
8) The house has three panels-fences. In two, decorative round holes 200mm, in the third, oval 200x166 mm. Nonsense! When I asked why, he replied: I am not obliged to explain every detail, it was modeled in 3D (by himself), so I decided to leave it as is. "Professional" and "tactical" answer.
That's how it is.
Here is a comparison of what was said and what the draftsman did.
Initially, the requirements were:
1) Our board comes in two thicknesses - 20 mm and 40 mm. width 150 mm
Done: 30 mm board!!!!
2) The seats are attached via brackets 40x20x20
Done: three types of brackets in different places 60x60x40, 60x60x30 with two different holes
3) The fastening of the posts is done with screws 8x60. The roof is also fastened with screws.
Done: made it on the third attempt, but did not secure the roof to the beam from above, only to the brackets to the gables.
4) Product dimensions: at least 1500x1422x1930mm
Done: 1560x1260x1740!!! I made the height and width 200 mm less. How is that possible? Specific dimensions were provided at the beginning.
5) The floor frame was made incorrectly and in my own way, even after we drew it by hand on paper and sent instructions on how to do it.
6) The instructions were not made according to our requirements (an example was sent at the beginning).
7) The specification was not made according to our requirements (an example was sent at the beginning).
8) The house has three panels-fences. In two, decorative round holes 200mm, in the third, oval 200x166 mm. Nonsense! When I asked why, he replied: I am not obliged to explain every detail, it was modeled in 3D (by himself), so I decided to leave it as is. "Professional" and "tactical" answer.
That's how it is.
