3D visualization of the garden from the Gabions

A new version of the existing corner modular shelf for storage needs to be developed. The provided model can be used as a basis (I will send the model to the performer), but the design and construction should be changed according to the requirements below. General Concept The shelf is intended for installation in the corner of a room and should be modular. Several identical modules are installed on top of each other and securely fixed together. The main style is modern minimalism with smooth lines and large rounding radii. Dimensions Size on each side adjacent to the wall: 230 mm Height of one module: 100 mm The wall thickness should be optimized for FDM printing (approximately 2.5–3 mm).Front Part The front edge should be significantly lower than in the original model. Goal: to ensure free access to the contents; the user should be able to reach items even from the bottom shelf without removing the upper modules. The front cut should be made with a smooth arc. No sharp corners.Side and Back Walls The height of the side and back walls should remain almost full. All outer corners should have large roundings. Module Connection A hidden connection system needs to be implemented. It is currently visible. On top of each module: guides/mounting holes. On the bottom: matching pins. After installation, the module should: automatically center; not shift sideways; not rotate. The connection should be as inconspicuous as possible from the outside.Internal Part The bottom should remain flat. No partitions should be made inside for now (there is a visualization of the concept attached). (Partitions will be a separate task later.) Construction The model must be fully suitable for FDM printing. Mandatory: no supports; no overhanging elements; no complex bridges; no separate parts. The shelf should be printed as a single piece.Design No decorative textures should be used. Surfaces should be smooth. Large smooth radii are welcome. The shape should look modern and premium.What to Provide Source file (Fusion 360 / SolidWorks / Onshape or other parametric CAD). STL. STEP. All dimensions should be parametric for further editing.

A 3D model of the top part of a stove is needed, which has patterns. It consists of 8 identical segments, so only 1 segment is required, as shown in the picture below.

Visualization of a commercial property with adjacent territory and parking, a standalone café, and a large retail store. And an adjacent area for car sales.

It is necessary to develop a gift case in the form of a miniature book-box for packaging a scientific and technological product. The case should combine premium classic design and modern technologies, based solely on our brand symbols, logo, and individual inscriptions (the prototype is in the photo and I will upload all other files in the chat).

It is necessary to develop 3 wall decorative panels for 3D printing (FDM). Style — modern minimalism. All models must be original, not replicate existing metal panels, and not copy images from the internet. General requirements for all models Size: 230 × 230 mm (maximum) Thickness 4 mm Printing material: PLA Printing: without supports without overhangs the model must lie completely on the printer bed all elements are in one planeDesign All lines must be thick enough for reliable printing. Recommended line width: 3–5 mm. Do not make very thin elements. All parts of the model must be connected to each other. Not allowed: separate islands hanging elements weak bridges The model must have sufficient rigidity.Mounting It is necessary to provide for hidden mounts. Important: The holes should not look like separate elements of the design. They must be organically integrated into the design. For example: inside leaves at the top of the composition inside decorative elements at the intersections of lines From the front side, the mounts should hardly be noticeable. Number of mounts: 2 holes. Diameter: 6-8 mm. The mount should be suitable for: self-tapping screws screws wall hooks double-sided mounting tapeRoundings All external and internal corners should be slightly rounded. Do not make sharp corners.Surfaces No textures. Only clean geometry. The surface is smooth.Model No.1Floral Harmony Round composition. Inside the circle: large modern flower leaves decorative twigs the composition should look modern, not like a store bouquet. Minimalist style. Do not use too many small details.Model No.2Flower Vase Composition in the form of a vase with flowers. It is necessary to create a modern decorative vase. A composition of various plants emerges from the vase. Use: leaves twigs one large flower several small flowers decorative berries or inflorescences It is important to make the composition light and airy. Do not overload with details.Model No.3Cat Wall panel with a cat. Style — minimalism. The cat sits sideways or at an angle. Around it can be: flowers leaves decorative plants The composition should look cozy and modern. Do not make a cartoonish cat. Do not make it too realistic. A stylish interior silhouette is needed.What should be produced Source files: STEP or Fusion 360 or SolidWorks. Additionally: STL.