Budget: 10 USD Deadline: 5 days
Я архитектор фрилансер, опыт работы 13 лет. почта: [email protected]
Надо сделать чертеж здания в colerdraw.
Есть рисунок.
Пишите свой электронный адрес. Вышлю подробности на почту. Работаю на прямую с исполнителями.
Budget: 10 USD Deadline: 5 days
Я архитектор фрилансер, опыт работы 13 лет. почта: [email protected]
Budget: 200 UAH Deadline: 1 day
Вітаю!
Готовий виконати завдання.
Вартість 150 грн.
Надсилайте завдання на адресу:
[email protected]
У відповідь надішлю готову роботу, якщо все влаштовує - Ви виконуєте оплату.
Якщо щось не так - я виправляю.
Оплата після виконаної роботи.
Budget: 200 UAH Deadline: 2 days
Почта:
[email protected]
Жду подробностей.
Budget: 200 USD Deadline: 3 days
Добрый день. Присылайте задание на почту [email protected]
Budget: 200 UAH Deadline: 2 days
Доброго дня! Готовий співпрацювати з Вами. Виконую креслення в програмі Корел-древ та Архікад-18. Мій імейл : [email protected]
Budget: 222 UAH Deadline: 2 days
[email protected]
РАботаю в colerdraw 15 лет
Budget: 200 UAH Deadline: 1 day
Budget: 500 UAH Deadline: 3 days
Готов выполнить
[email protected]
Budget: 200 UAH Deadline: 1 day
Здравтсвуйте. Последнее время много таких заказов выполнил (на чертеж в корал драв). Готов обсудить реальные строки и ральную цпосле осмотра задания.
Budget: 300 UAH Deadline: 3 days
*
Budget: 50 USD Deadline: 1 day
Здравствуйте . Выполню чертеж качественно. Буду рада сотрудничеству с Вами ! Стоимость и сроки обсудим.Пишите.
e-mail: [email protected]
Budget: 200 UAH Deadline: 2 days
Пишите [email protected], буду рада помочь, примеры могу сбросить
Budget: 20 USD Deadline: 2 days
Здравствуйте.
Работаю в CorelDraw.
Пример работы здесь:
https://www.dropbox.com/sh/mjno4nkhvtpl4eu/AADRuwI83pjspb1hcZFZslhxa?dl=0
Почта: [email protected]
Интересуют подробности.
Обращайтесь.
Budget: 10 USD Deadline: 2 days
Здравствуйте!
[email protected]
Budget: 30 USD Deadline: 3 days
Мое портфолио здесь
https://db.tt/rat2B21O
Budget: 10 USD Deadline: 1 day
я Архитектор, есть опыт подобных работ, часто доводилось чертить в кореле)
[email protected]
Budget: 10 USD Deadline: 3 days
Буду рада сотрудничеству. Был опыт подобных работ.
Точную стоимость и сроки скажу после более детального обсуждения.
Обращайтесь
[email protected]
Skype: Tania.Rom.
Портфолио в профиле
Budget: 1000 UAH Deadline: 3 days
Здраствуйте,
На данный момент я ведущий архитектор с хорошим опытом работы над большими и многодельными проектами. Но для точного расчёта времени и стоимости необходимо понимание объёмов работ.
Если Вы заинтересованы, вышлите изображение плана на почтовый ящик:
[email protected]
Budget: 200 UAH Deadline: 1 day
Добрый день. Опыт работы в полиграфии более 17 лет. Буду рад сотрудничать. Сделаю качественно и в срок. Предоставлю с вариантами. Готов сейчас приступить к работе
почта - [email protected]
скайп: dschayka
Мое полное портфолио находятся на сайте
http://chayka.jimdo.com
Budget: 200 UAH Deadline: 1 day
Budget: 10 USD Deadline: 1 day
Здравствуйте
буду рад работать с вами
моя почта pylyproman.t.ua_gmail.com
We need a design engineer or a spring design specialist with experience in calculating and developing design documentation. Required tasks: calculate spring parameters according to specified technical requirements and samples; select the optimal material according to operating conditions; determine the main geometric parameters (wire diameter, outer/inner diameter, number of turns, pitch, length, etc.) from the provided sample; perform verification calculations (stress, working stroke, resource, safety margin); prepare drawings for further production; provide a specification indicating the material and main technical characteristics. Types of springs: compression springs; extension springs; torsion springs (if needed). Requirements for the performer: experience in spring design; knowledge of standards (DIN, EN, ISO, GOST or similar); understanding of spring manufacturing technology; At the beginning of cooperation: The development of several springs is planned. If the cooperation is successful, long-term collaboration with regular orders is possible.
I have product patterns in plt format in 4 sizes. It is necessary to create a layout that is as convenient as possible for cutting at widths of 139 cm and 150 cm.
We are preparing to open a primary healthcare clinic (first floor, ~200 m²). There is a current layout plan with dimensions (PDF in attachments) and photos of the premises. The main area is an open space of 109.26 m² with panoramic windows along the arc and round columns. What needs to be done: Planning solution. Place 4 additional doctor’s offices in the open area of 109.26 m², while maintaining the reception, waiting area, access to the procedure room, restrooms, and emergency exits. The offices should be approximately 10–14 m², preferably with natural lighting. The solution should be budget-friendly: lightweight partitions (aluminum/drywall, as in the photos already installed), without major changes (but we are ready to consider alternatives). Minimal interior design concept. A unified palette and materials for the entire clinic (walls, floor, lighting, reception, waiting area), navigation within the premises. No expensive decor — clean, bright, modern, “medical.” 2–3 visualizations of key areas (photorealism is not mandatory). We have a brand book. Facade concept. The exterior appearance with the clinic sign and window decoration, 1–2 angles. Minimal interventions, no reconstruction. Drawings. Updated plan with dimensions and explication — PDF + output (DWG or similar). In your response, please indicate: cost (can be phased: plan → design → facade), timeline, examples of similar work (medical/commercial premises — a plus). We are open to considering options from beginners.
“Good day! I need to develop a drawing of a machine (device) for stitching sheets of agricultural crops. I will provide photos and video materials. Main requirements for the project: Simplicity of design: The machine should be as simple as possible to manufacture and assemble. It is preferable to use readily available materials that can be easily purchased. I understand that some parts will still need to be made individually (custom-made). There are no obstacles with shaping (bending) sheet metal and welding work. Reliability and minimal maintenance. Desired power supply is 220 V. However, I leave the final decision to you — as specialists, you know better which option will be better and easier to implement. Below, I am adding videos with examples of similar machines, as well as videos of similar devices for stitching brooms — perhaps some design solutions can be borrowed from there for our project. Have a great day, I look forward to your proposals!” https://youtube.com/shorts/rT6q4pa_VSY?si=_6iCZLlPV0YXvtUo https://youtu.be/V9nMWLxpIbA?si=xfFpMIFf6qxE0WRB
Output data: Existing building: single-story office building; structural scheme — frame-less brick; external walls thickness 380–640 mm; internal load-bearing walls thickness 380–510 mm; ceilings — precast reinforced concrete hollow-core slabs; foundations — columnar with FBS blocks; approximate dimensions of the building — 40.34 × 28.84 m; building area — about 747 m². Planned: dismantling of the existing rafter system and roof; addition of a second floor with glued laminated timber structures; installation of a new wooden roof structure; reconstruction of the existing building with partial changes in loads on load-bearing structures.Required to perform: Analysis of the provided technical report on the building inspection. Verification calculation of existing foundations, walls, and ceilings for the perception of additional loads from the addition. Development of structural solutions regarding: installation of reinforced belts; strengthening of brick walls; strengthening of foundations (if necessary); ensuring spatial rigidity of the building; nodes for load transfer from glued laminated timber structures to the existing building. Calculation and justification of the adopted solutions. Issuance of a set of drawings for the stages of KB/CM/KZ (depending on the adopted solutions). Consulting support during the development of wooden structures and implementation of the project.Output documentation: Scientific and technical report on the building inspection. Measurement drawings. Architectural solutions for the addition. Preliminary concept of glued laminated timber structures.Requirements for the contractor: availability of a design engineer certificate in terms of ensuring mechanical resistance and stability; experience in the reconstruction of existing buildings; experience in designing the strengthening of brick or stone buildings; preferred experience working with additions of wooden structures or glued laminated timber.Message text for Freelancehunt Good day. We are looking for a designer to participate in the project of reconstructing an existing single-story brick office building with a subsequent addition of a second floor made of glued laminated timber. It is necessary to take on the development of structural solutions regarding: reinforced belts; strengthening of existing brick walls; if necessary — strengthening of foundations; ensuring spatial rigidity of the building; load transfer from new wooden structures to the existing building. A technical inspection of the building and measurement drawings have been completed, which will be provided to the contractor after preliminary discussion of the project. Preferred experience: reconstruction of existing buildings; development of solutions for strengthening stone or brick structures; work with additions or wooden structures. Please include in your response: a brief overview of your experience; examples of similar completed projects; available certificates; estimated budget and timelines for the work. We are ready for long-term cooperation on similar projects.