The workshop with the toilet.
9 USD There is room 583x307x220 (length x width x height),
In which I want to make a workshop, where there will be a separate room with a uniform and a washing machine.
Conditions are:
1 . The sanusell is located only at the wall with a window (this window plays the role of the entrance door) by the window to the width: 113 cm.
2nd The toilet room is desirable not to be large, but not too small, so that it can be comfortable to move and wash your hands.
Three Show the sizes of the wall, the doors for the toilet, the uniform and the washing machine.
The project must be drawn in ArtCam.
If you have any questions, please ask.
Thank you !
Applications 2
Client's review of cooperation with freelancer
The workshop with the toilet.Thank you for the work done!I am satisfied with the result.👍
Freelancer's review of cooperation with Dobry Zakazchik
The workshop with the toilet.Отличный заказчик, приятный человек, чётко объяснил задачу. Рекомендую к сотрудничеству))
-
1. Санузел пролегает только у стены с окном (это окно играет роль входной двери)
вход через санузел
если быть совсем точным - через окно в туалете
-
Не совсем 🤭 В данном случае окно играет роль входной двери, т.к. проём слишком мал 😃
-
Ааа, понял про что Вы говорите. Я не уточнил, что комната в туалет должна быть отделена от входного проёма.
-
Current freelance projects in the category Drawings & Diagrams
Shop drawings (working drawings) of Reynaers MasterLine 8 / MasterPatio aluminum windows and doorsWhat needs to be done: develop a set of working/installation drawings (shop drawings) and detailed drawings of positions for the project of glazing with Reynaers MasterLine 8 aluminum systems (windows — fixed and tilt-and-turn, hinged doors) and Reynaers MasterPatio… Drawings & Diagrams ∙ 12 hours 51 minutes back ∙ 1 proposal |
Need a certificate "Safety of Operation..."Our project organization is looking for a design engineer (electrician) with a valid qualification certificate for a one-time subcontract. Task: Verification of the completed project of the commercial accounting organization (POKOEE) and signing of the title sheet/schemes.… Engineering, Drawings & Diagrams ∙ 14 hours 42 minutes back |
Development of a project for the reconstruction of the electrical supply of a private complex of buildings
223 USD
Develop a project for the reconstruction of the power supply of the complex of buildings. Add Input 2 networks (technical specifications received), correct the deficiencies of the previous power distribution scheme through the phased introduction of loads: swimming pool, sauna,… Drawings & Diagrams ∙ 14 hours 47 minutes back ∙ 2 proposals |
Schematic and PCB design
89 USD
It is a simple fan controller schematic. I will provide a hand-drawn sketch of the schematic. You need to create the schematic in KiCad and implement the PCB design. Add the implementation of a small Buck converter to the schematic. Details will be discussed further along the… Embedded Systems & Microcontrollers, Drawings & Diagrams ∙ 1 day 7 hours back ∙ 4 proposals |
Water Supply and Sewerage Design Engineer (WSS, Revit)
What is important for us: ✔️ Experience in design for at least 2 years. ✔️ Knowledge of Revit — the main working tool, knowledge of AutoCAD is preferred. ✔️ Modeling fire extinguishing systems in Revit (will be a plus). ✔️ Knowledge of AutoCAD will be a plus. Your main tasks:… Engineering, Drawings & Diagrams ∙ 1 day 14 hours back ∙ 2 proposals |
Almaty (Alma-Ata)