Good day. It is necessary to make a few precise technical adjustments to the existing vector layout, which consists of a complex pattern. The work requires high accuracy and attention to detail, as the layout is being prepared for production (screen printing).

I will provide the source files in vector format (AI/EPS).

Technical task (TT)

1. Modification of contact pads (terminals):

All conductive strips in the layout must have a constant width of 10 mm.

At the endpoints of each strip, it is necessary to form a round contact pad.

The outer diameter of this round pad must be 12 mm (with the same fill as the strip).

Inside this 12-mm pad, there must be a round cutout (exposed area, without fill) with a diameter of 8 mm.

The result: a clear conductive ring with a width of 2 mm must be formed.

2. Adjustment of the geometry of the central pattern:

In one of the layouts ("clover-like" pattern), adjustments were made in the central part to reduce gaps.

Task: "groom" and align these adjustments. The lines must be smooth, symmetrical, and aesthetically correct, without "crooked" angles or sharp transitions, while maintaining the logic of minimizing gaps.

3. Requirements for the result:

Provide final, clean layouts in vector format (AI, EPS, and PDF).

All objects must be correctly combined (for example, the strip and its round terminal must be a single whole).

The file must be fully ready for transfer to production.