Budget: 5000 UAH Deadline: 5 days
Good evening, Viktor. I am ready to execute your idea. I will do everything according to your specifications.
It is necessary to perform landscape design of a private plot taking into account the location of the house and the new gazebo (15×5 m, single-pitched roof).
Consider the placement:
Paving (paths, driveway, platforms).
Green areas (grass, flower beds, trees, decorative bushes).
Recreation area near the gazebo (possible barbecue).
Take into account the actual slope of the plot (from 0.6 to 1.2 m).
Show how the gazebo fits into the house and yard.
Provide convenient passages and a smooth transition from the house to the gazebo.
3D visualization of the plot (house + gazebo + paths + green areas).
A plan-scheme with dimensions and explanations (where the tiles are, where the lawn is, where the plantings are).
Recommendations on materials (type of paving, landscaping).
Budget: 5000 UAH Deadline: 5 days
Good evening, Viktor. I am ready to execute your idea. I will do everything according to your specifications.
Budget: 24000 UAH Deadline: 28 days
Good day! I am ready to discuss. I can create a complete landscape project with visualizations and drawings. I can also select materials and plants. Behance
Budget: 20000 UAH Deadline: 28 days
Hello,
I will carry out the landscaping project and the sketch project of the gazebo. Planning of the area with dimensions, selection of materials. 3D visualization.
Example of a similar project https://471472.wixsite.com/sergera/plan-of-the-area-of-private-housing
I have extensive practical experience in designing and implementing projects.
Some of my projects: https://471472.wixsite.com/sergera
Budget: 25000 UAH Deadline: 30 days
Good day!
We can create a sketch project with visualizations, planning, and a landscaping palette.
If needed, we can also develop detailed drawings. I can provide examples in private messages. Deadlines and costs are open for discussion. It would be good to receive more initial data and examples of how you envision your garden.
Budget: 4000 UAH Deadline: 4 days
Good day.
I will do the work quickly and efficiently.
Extensive practical experience.
I am engaged in Architectural, Construction projects, developing concepts of varying complexity, 3D modeling, 3D visualization, 3D video animation, project presentation, interior and exterior design, video editing, working with AI, as well as product design, developing furniture prototypes (designed and produced for an exhibition in Canada, after which they were launched into mass production), industrial design for mass production (a street lamp designed was installed in large quantities in various cities in different countries), product listing. Excellent knowledge of ergonomics, regulatory framework in the field of construction design. Extensive practical experience. Creative approach to work. I work in programs 3ds Max + V-Ray + Corona, SketchUp + V-Ray, AutoCAD, Revit, Photoshop, Lumion, After Effects, Archicad. My portfolio https://3ddomkiev.wixsite.com/website-2
Budget: 18000 UAH Deadline: 10 days
Good day
We professionally engage in landscape design.
We will develop a 3D layout with the placement of all elements specified in the technical specifications. We will discuss which materials and plants we will use according to your region.
We will take the slope into account; there are several options to work with it — we will discuss.
Once we approve the 3D, we will create the drawings.
A paving scheme with references to the paving stones, curbs, stepping paths (where to buy, color) and dimensions.
A landscaping scheme (includes the size and quantity of lawn and fill) also with dimensions.
A dendrological plan – where and what plant is located, quantity and name.
Construction will be based on our drawings. If the foremen have questions during the implementation process – we are available, we will always help.
Link to our Instagram page:
https://www.instagram.com/e_sad_landscape?igsh=ZHh1NmNicHJ5M2p5&utm_source=qr
Budget: 8000 UAH Deadline: 10 days
Hello Viktor!
I will develop a site plan with visualization for you.
I will take into account all necessary technical details and your wishes.
Budget: 12000 UAH Deadline: 14 days
Hello!
I offer my services as an architect. I will execute landscape design according to the technical specifications. Master plan, technical documentation, specifications, visualization. I have experience in creating spaces for residential buildings and complexes.
My works - Behance
https://www.youtube.com/playlist?list=PLcFcojHYxHBGsnhFSTescmQC711kOWu5p
Write to discuss.
Budget: 5000 UAH Deadline: 20 days
Good day) I can complete your project, I have 11 years of experience in design, I can do both rendering and 3D visualization for you, I have experience in completing similar projects. The price starts from $12 per m2, but there will be a discount for the area)
Budget: 15000 UAH Deadline: 12 days
Good day, private estates with landscaping are my specialization, I can help, some examples of my work are in my profile, I will send more examples of similar projects upon feedback!
Budget: 5000 UAH Deadline: 5 days
Good day.
I am ready to complete your task. I have thoroughly familiarized myself with your wishes and will be able to do everything qualitatively and consult you. I have been collaborating with a company that manufactures paving stones for a long time, creating design projects for yards.
My main specialization is architecture. I reproduce all necessary buildings and will integrate everything into the landscape (slope).
Feel free to reach out, and we will discuss the project details, its cost, and timeline.
Budget: 2000 UAH Deadline: 2 days
Good day)
Architect with 30 years of experience
Has architect certificates: volumetric design and urban planning communication
Ready to complete your task)
Video example
https://www.youtube.com/watch?v=8SxvBjO_csE
Вітаю. Чи можете надати більше даних. Розмір ділянки, дані які є (креслення/схеми/плани), фото. На разі дуже важко надати точну пропозицію не знаючи розміра ділянки та з чим працювати
Good morning, I am a real estate agent and while acquiring land for sale, I also have plots that require absorption analysis. I am looking for an architect to prepare such analyses. The scope of the analysis is to be determined. Since the property owner covers this cost, I am looking for a service provider with competitive prices. The plots are mainly for division for single-family housing. Please feel free to contact me if you have any questions fundamentalgrunty dot pl
A project for a stove is needed, with a layout for two floors. On the first floor, a solid fuel stove for large firewood, one meter long. On the second floor, either a stove or a fireplace with gas channels for heating the second floor. Between the floors, there is a reinforced concrete slab, hollow. Above the second floor, there is an attic. On the second floor, the stove should be plastered, while on the first floor, it can be without plaster. Dimensions First floor Height 2200 mm from the floor to the slab Maximum width 1150 mm Length is not limited Second floor Opening in the wall 2100*2300 (height) Width up to 1200, the smaller the better. I am open to any options! The first floor is a basement. The area of the house is 120 m². The stove on the first floor is designed to heat a buffer tank of 600 liters for the underfloor heating on the second floor. The stove on the second floor serves as additional heating during the off-season, provided there is a fuel chamber. In the case of a stove, it serves as additional heating for adjacent rooms.
Vectorization (digitization) of the paper reconstruction project (115 sq.m) and registration in the EDESSB Task description: I am looking for a certified design engineer (or architect) with a valid qualification certificate and experience in the EDESSB office for digitizing and entering the completed reconstruction project into the system. Initial data of the object: Object type: separation of part of the premises of the former dormitory into a separate residential apartment. Area: 115 sq. m. Documentation status: there is an old, fully approved paper project (construction intentions) developed by a municipal architectural planning enterprise. The project has not been uploaded to the EDESSB system before (has not been digitized). Legal basis: there is an official and valid decision of the executive committee of the city council granting permission for reconstruction, the object has already been officially assigned an apartment number (address). Communications: all old paper approvals from the Fire Service, Sanitary Inspection, and City Gas (Gorgaz) are available. All networks are physically connected, metering devices are installed, and supply contracts are active. What specifically needs to be done (Scope of work): Vectorization (digitization): Redraw architectural and planning solutions from the paper archive into electronic form (PDF/DWG formats) according to current standards for graphic material design. Formation of the case in EDESSB: Create a project card in EDESSB and legally correctly attach the existing initial data: the executive committee's decision and old paper approvals from the services. Entry without new TU/MUO: Since the networks are existing and the re-planning occurs within the capital walls, the project is uploaded based on the CMU Resolution No. 406 (without issuing new TU and MUO). It is necessary to correctly fill in the declarative fields in the system to avoid blocks. Registration: Sign the project with your electronic signature and generate a registration number for the project with a QR code for the client for further submission of the Notification of the start of construction works in "Diia". Requirements for the performer: Availability of a valid certificate (I will check in the Register of certified persons). Successful experience in "processing" similar archival objects/reconstructions through EDESSB without new TU. CRITICALLY IMPORTANT CONDITION (REGARDING THE ENTRY METHODOLOGY): Please do not offer to develop a new project from scratch under modern standards at the full commercial design rate. The object has 100% ready, approved solutions in the capital walls. The task is specifically about updating the information of the old project (Stage P) through vectorization (according to the Procedure for maintaining EDESSB). Please base the work on official algorithms for entering "old" architectural solutions into EDESSB, which are currently widely discussed at professional workshops (for example, methods for supporting and digitizing archives from CLC PRO Group / PRO InfoBud). PRO InfoBud / Consultations / Commissioning / How to update information in EDESSB: guide for "old" permits. https://proinfobud.ua/yedessb/aktualizatsiya-vidomostey-yedessb-stari-proekty/ A vectorized plan is uploaded to the system, and the current decision of the executive committee and the paper letter from 2006 with wet seals from the city architect, the Ministry of Emergency Situations, and Gorgaz are attached as legal initial permit grounds. The program will not require new TU and MUO, as the project card indicates the absence of the need for new connections. A specialist is needed who clearly knows this technical toolkit of the EDESSB office. clcgroup.com.uaWorkshop “Entry and updating of “old projects” in EDESSB”https://clcgroup.com.ua/blog/aktualizatsiya-vidomostej-v-yedessb-shhodo-starih-proektiv/ Please indicate in your bids the final cost for the entire turnkey work (including uploading to the system) and realistic deadlines for completion. It is necessary to digitize the ready solution; there is no need to invent architecture or construction from scratch.
Wooden terrace 7x4.5m with a frame wooden sauna 3.5x2.25m and a tub. The terrace is located on a plot with a slight slope. It is necessary to calculate the structure of the terrace (made of wood; the site is in the mountains - high snow load), calculate the structure of the sauna, develop a 3D model (photorealistic renders are not needed) and prepare drawings (facades, sections, site plan). A small complication: the documentation and drawings must comply with a specific format. Nothing special, but markings, colors of materials, and other details must adhere to a certain format. I will provide samples. In the attached files, there is an unfinished model for a general understanding of the concept.
A technical or design project is needed to start the renovation of a residential building with an area of 69m2. The layout will be attached below.