Budget: 1500 UAH Deadline: 5 days
Здравствуйте, Руслан. Есть опыт работы инженером-конструктором на производстве и опыт 3Д-моделирования. Задача понятна, готов к обсуждению уточнения ТЗ, если необходимо.
Привет всем,
есть такая задачка, есть видео ролик необходимо из него выбрать кадры где более менее понятно из чего состоит конструкция в сборке и сделать 3-4 ракурса визуализации в качестве как на примере в приложении этого задания.0
ролик: https://youtu.be/RrPjbydZRmg
и разместить эти 3-4 ракурса на песке (якобы в пустыни)
Budget: 1500 UAH Deadline: 5 days
Здравствуйте, Руслан. Есть опыт работы инженером-конструктором на производстве и опыт 3Д-моделирования. Задача понятна, готов к обсуждению уточнения ТЗ, если необходимо.
Budget: 2000 UAH Deadline: 3 days
Добрый день.
Мой опыт работы 5 лет. Заинтересован в совместной работе.
Мое портфолио Behance
Остальное могу скинуть по почте.
Буду рад знакомству и сотрудничеству.
Budget: 500 UAH Deadline: 1 day
Могу выполнить Ваш заказ быстро и качественно.
Цена указана для визуализации модели в минимальной деталировке.
Мои работы по ссылке: Google Drive
Budget: 3000 UAH Deadline: 4 days
Здравствуйте!
▶ Сделаю конструкцию в лучшем виде!
✔ Моделирование - САПР SolidWorks;
✔ Визуализация - KeyShot.
---------------------
☀ Портфолио - Freelancehunt
Budget: 1650 UAH Deadline: 2 days
Здравствуйте, уважаемый Руслан!
Непременно помогу вам в этой задаче!
Есть одна идейка, как красиво показать ваш объект да и к тому же на песке.
Как раз недавно закончил подобный проект с похожей задачей (визуализация, песок, только в анимации). Вот, пожалуйста, взгляните https://youtu.be/MJ8H2cy_Znw
По срокам зависит от вашего времени. Могу приступить завтра или же в понедельник.
По уровню качества тоже нужно с вами согласовать.
Со своей стороны обещаю коммуникабельность, отзывчивость, выполнение с учетом всех нюансов и соблюдение сроков. Скажите, могу ли я взглянуть на ТЗ?
Budget: 1400 UAH Deadline: 2 days
Готов выполнить проект. Можно сделать облет камеры в 360.
potrfon.tumblr.com
Budget: 999 UAH Deadline: 3 days
АрхіКад + 3Д Макс. Корона . Конструкції роблю досить часто, співпрацюю з двома фірмами по обладнання з металу.
Budget: 1000 UAH Deadline: 4 days
Здравствуйте! Готова выполнить задание
Примеры моих работ:
Behance
Google Drive
Budget: 2000 UAH Deadline: 2 days
Добрый день.
Цена приблизительная,обсуждение в переписке.
Behance - портфолио.
Делаю качественно,большой опыт.
Пишите.Цены вменяемые.
Budget: 500 UAH Deadline: 1 day
Здравствуйте.
Предлагаю Вам свои услуги по моделированию и визуализации. Работаю в программах 3ds Max 2020+V-Ray Next +Corona 5, SketchUp 2019+ V-Ray Next, AutoCAD 2020, Revit 2020, Photoshop 2020, Lumion 10, After Effects 2020, Archicad 23. Моё портфолио http://3ddomkiev.wixsite.com/3ddom
Budget: 1000 UAH Deadline: 2 days
Привет. Задача понятна, готов выполнить ваше задание, обращатесь.
Budget: 1000 UAH Deadline: 1 day
Выполню вашу заявку в 3D Blender 2.8 с необходимым правками и сохраню в необходимых форматах.
Budget: 1200 UAH Deadline: 4 days
Здравствуйте, Руслан!
Я архитектор-дизайнер и имею большой опыт в моделлирование и визуализации.
Заинтеросовало это задание, готова выполнить быстро и качественно!
Budget: 2000 UAH Deadline: 3 days
Здравствуйте!
Позвольте предложить вам, смоделировать и визуализировать эту конструкцию заново в 3д макс, сделать красивые кадры с тех ракурсов с каких вам необходимы.
Budget: 1500 UAH Deadline: 3 days
Здравствуйте Руслан.
Готов обсудить и выполнить Ваш проект.
Примеры в портфолио: Freelancehunt
Обращайтесь.
С уважением,
Сергей.
Budget: 1500 UAH Deadline: 4 days
Здравствуйте. Заинтерисована Вашим проектом. Сделаю быстро и качественно. Обращайтесь. Вы будете довольны результатом.
Портфолио:
Behance
Hello, I am looking for a specialist in mattress renders. I have real photos of the mattresses. 15 pieces of mattresses and for each one, we need to create for one mattress: - 3/4 shots of the mattress - 3 infographics - 2 animations Please apply only if you have EXPERIENCE Best regards
Looking for a 3D modeler,制作3D模型儿童游乐场用木材,根据图纸,进行调整。
Use the existing model as a basis (I will send it to the performer). Do not change the folding mechanism, hinge, dimensions, or overall structure. The following modifications need to be made:1. Front Supports (horns) Replace the existing short supports with more modern curved horns. The horns should start slightly higher vertically relative to the current model. Keep the overall length of the horns compact (do not make them longer). Only the position relative to the base is changed. This seating should provide more free space under the bottom of the phone for connecting the charging cable without strong bending. All transitions should be smooth, without sharp angles.2. Design Update Give the product a more modern minimalist appearance in the style of Apple (Soft Minimalism). Requirements: increase the radii of rounding throughout the product; remove the feeling of "squareness"; make the transitions between all elements smoother; round the edges and outer edges of the base; maintain a simple minimalist appearance without decorative elements and textures. The product should look like a solid cast premium-level accessory.3. Logo On the inner side of the upper back, create an embossed inscription: Metalandbrassco Requirements: font Franklin Gothic Demi; the inscription should be centered on the back; make it as an indentation (engraved), not raised; depth of indentation — about 0.5–0.8 mm; letters should have sufficient thickness for quality FDM printing.4. Printing Requirements The model should be printed without supports. Do not create new overhanging elements. Maintain the strength of the structure and the existing angle adjustment mechanism. All changes must be adapted for FDM printing (PLA/PETG, 0.4 mm nozzle).What to Provide Source file (Fusion 360 / SolidWorks / Onshape or other parametric CAD). STL. STEP. All dimensions must be parametric for further editing. A few days will also be needed for test printing before closing the project.
A new version of the existing corner modular shelf for storage needs to be developed. The provided model can be used as a basis (I will send the model to the performer), but the design and construction should be changed according to the requirements below. General Concept The shelf is intended for installation in the corner of a room and should be modular. Several identical modules are installed on top of each other and securely fixed together. The main style is modern minimalism with smooth lines and large rounding radii. Dimensions Size on each side adjacent to the wall: 230 mm Height of one module: 100 mm The wall thickness should be optimized for FDM printing (approximately 2.5–3 mm).Front Part The front edge should be significantly lower than in the original model. Goal: to ensure free access to the contents; the user should be able to reach items even from the bottom shelf without removing the upper modules. The front cut should be made with a smooth arc. No sharp corners.Side and Back Walls The height of the side and back walls should remain almost full. All outer corners should have large roundings. Module Connection A hidden connection system needs to be implemented. It is currently visible. On top of each module: guides/mounting holes. On the bottom: matching pins. After installation, the module should: automatically center; not shift sideways; not rotate. The connection should be as inconspicuous as possible from the outside.Internal Part The bottom should remain flat. No partitions should be made inside for now (there is a visualization of the concept attached). (Partitions will be a separate task later.) Construction The model must be fully suitable for FDM printing. Mandatory: no supports; no overhanging elements; no complex bridges; no separate parts. The shelf should be printed as a single piece.Design No decorative textures should be used. Surfaces should be smooth. Large smooth radii are welcome. The shape should look modern and premium.What to Provide Source file (Fusion 360 / SolidWorks / Onshape or other parametric CAD). STL. STEP. All dimensions should be parametric for further editing.
A 3D model of the top part of a stove is needed, which has patterns. It consists of 8 identical segments, so only 1 segment is required, as shown in the picture below.