Budget: 21000 UAH Deadline: 30 days
Добрый день, если вы хотите сделать классную входную группу и благоустройство за настоящие рыночные деньги, обращайтесь к нам. Наши работы на сайте https://www.loboda.co.ua/
Ищем дизайнера для оформления интерьера витрин медицинского центра КИЕВ . Необходимо креативное оформление входной группы МЕД ЦЕНТРА.
Оформление дверного проема магазина и по сути его визитная карточка. Входная дверь, навес, лестница, пандус, вывеска, витрина, благоустройство территории перед магазином — все должно быть функционально и необычно.
отправляйте свой номер телефона
Budget: 21000 UAH Deadline: 30 days
Добрый день, если вы хотите сделать классную входную группу и благоустройство за настоящие рыночные деньги, обращайтесь к нам. Наши работы на сайте https://www.loboda.co.ua/
Budget: 3000 UAH Deadline: 12 days
Добрый день, предлагаю Вам свои услуги дизайнера, имею большой опыт создания и реализации дизайн проектов и 3д визуализации.
Обладаю всеми необходимыми навыками, работаю в разных стилях.
Готов выполнить это задание!
Для знакомства с моими работами:
Портфолио: Behance
Рабочий instagram: https://www.instagram.com/zhirko_des/?hl=ru
Проекты 360: https://kuula.co/profile/ZSergey
Обращайтесь!
Budget: 7000 UAH Deadline: 5 days
Здравствуйте!
Занимаюсь дизайном Интерьеров.Заведений.Торгово-Выставочного оборудования,Выставок.Магазинов.Мебели и не стандартных изделий.А так же предметным дизайном.
Имею так же большой производственный опыт.
https://taryeld.wixsite.com/render
Здесь можно посмотреть некоторые работы!
Там же и контактные данные на страничке.
Буду рад оказаться полезным!
Budget: 12000 UAH Deadline: 21 days
Добрый день,
профессионально выполню проект входной группы. Стилистика, визуализация, подбор материалов, документация. Стоимость будет зависеть от состава проекта. Имею большой реальный опыт проектирования аналогичных объектов.
Выезжаю на объект для ознакомления, обсуждения и замеров.
Номер телефона вышлю в личном сообщении.
Некоторые мои работы:
http://471472.wixsite.com/sergera
Freelancehunt
Budget: 1800 UAH Deadline: 4 days
Добрый день, готова взяться за работу. Имею большой опыт в дизайне интерьера и проектировании помещений.
Для работы мне будет необходимо:
1. Обмерный план помещения (размеры стен, высота потолков, габаритные размеры оконных и дверных проёмов);
3. Стилистические предпочтения в интерьере (картинки интерьеров, которые вам нравятся.
В результате работы вы получите:
1. Планы помещений (обмерный, расстановка мебели);
2. Визуализация помещений (3-4 ракурса на каждую комнату +вид сверху);
3. Развёртки помещений (2Д планы стен и мебели);
4. Подбор цветовой гаммы помещения.
Budget: 9900 UAH Deadline: 1 day
Здравствуйте.
Предлагаю Вам свои услуги по моделированию и визуализации. Работаю в программах 3ds Max 2020+V-Ray Next +Corona 5, SketchUp 2019+ V-Ray Next, AutoCAD 2019, Revit 2019, Photoshop 2019, Lumion 9, After Effects 2019, Archicad 23. Моё портфолио http://3ddomkiev.wixsite.com/3ddom , Behance
Спасибо.
Budget: 7000 UAH Deadline: 12 days
Доброго дня!
Готова розробити проект. Є досвід в оформленні вхідної групи стоматологічних клінік.
З повагою, Марта
Budget: 2790 UAH Deadline: 9 days
При хорошем финансировании тут возможно очень интересное решение! Обращайтесь! Придумаю приемлимый вариант, исходя из ваших амбиций и возможностей!!!))))
Budget: 3000 UAH Deadline: 3 days
Доброго вечора, зацікавила ваша пропозиція, розроблю дизайни фасадів, якщо вам цікавить звертайтесь, буду радий співпрацювати.
Ціна договірна!
Робоити за посиланням:
https://instagram.com/revolsgroup?igshid=1im973u74nx0e
Behance
https://www.facebook.com/Revolsgroup/
Budget: 7000 UAH Deadline: 5 days
Сделаю качественно. Примеры работ можно посмотреть тут: Freelancehunt
Budget: 5000 UAH Deadline: 3 days
Добрый день Анастасия) Готова взяться за проект. Опыт в оформлении фасада клиники есть(могу отослать в личном сообщении).
Делаю все комплексно:
1) выезжаю на объект, делаю замеры, мы с Вами обсуждаем Ваши пожелания и предпочтения по фасаду, возможно у Вас есть фирменные цвета;
2) делаю минимум 2 варианта оформления фасада, которые считаю наиболее выигрышными, выбираем вариант, корректируем, утверждаем;
3) готовлю файл с ссылками на декор, плитку, поставщиков;
Если возникнут дополнительные вопросы - пишите)
Мои работы:
https://ghar.com.ua/portfolio/
https://angelikakharchenko.wixsite.com/portfolio
Budget: 1500 UAH Deadline: 2 days
Добрый вечер, увидел ваш заказ, заинтересовал. Я занимаюсь 3D моделлированием визуализацией, на протяжении 5 лет. Выполню ваш заказ в указанные сроки по всем вашим требованиям. По цене сможем договориться, так чтобы, это было приемлемо для меня и вас.
Номер могу указать при вашем отклике в л/с
Буду рад с вами сотрудничать
Budget: 2500 UAH Deadline: 3 days
Здравствуйте! Заинтересовал Ваш проект. Готов обсудить детали
Project Description I am looking for a specialist for regular collaboration in preparing 3D models for printing on a 3D printer. Requirements: correction of the model's geometry; removal of artifacts; correction of faces, hands, and small details; closing holes and checking the model for errors; combining all elements into a cohesive model; preparation of an STL file, fully ready for printing. Requirements for the performer: experience working in Blender, ZBrush, or Meshmixer; experience in preparing models specifically for 3D printing; attention to detail; having a portfolio will be an advantage. In your response, please indicate: examples of completed works; cost of preparing one model; estimated completion time. I am considering long-term collaboration. This text looks professional, does not reveal that the models are generated by neural networks, and immediately filters out performers without experience in preparing models specifically for 3D printing.
Looking for a 3D modeler,制作3D模型儿童游乐场用木材,根据图纸,进行调整。
It is necessary to develop an interior design and layout of the retail equipment taking into account customer movement, merchandising rules, convenience for the seller, and placement of all product groups. The store area is 130.7 m². The premises consist of two levels. The floor plan and photographs are attached.
Use the existing model as a basis (I will send it to the performer). Do not change the folding mechanism, hinge, dimensions, or overall structure. The following modifications need to be made:1. Front Supports (horns) Replace the existing short supports with more modern curved horns. The horns should start slightly higher vertically relative to the current model. Keep the overall length of the horns compact (do not make them longer). Only the position relative to the base is changed. This seating should provide more free space under the bottom of the phone for connecting the charging cable without strong bending. All transitions should be smooth, without sharp angles.2. Design Update Give the product a more modern minimalist appearance in the style of Apple (Soft Minimalism). Requirements: increase the radii of rounding throughout the product; remove the feeling of "squareness"; make the transitions between all elements smoother; round the edges and outer edges of the base; maintain a simple minimalist appearance without decorative elements and textures. The product should look like a solid cast premium-level accessory.3. Logo On the inner side of the upper back, create an embossed inscription: Metalandbrassco Requirements: font Franklin Gothic Demi; the inscription should be centered on the back; make it as an indentation (engraved), not raised; depth of indentation — about 0.5–0.8 mm; letters should have sufficient thickness for quality FDM printing.4. Printing Requirements The model should be printed without supports. Do not create new overhanging elements. Maintain the strength of the structure and the existing angle adjustment mechanism. All changes must be adapted for FDM printing (PLA/PETG, 0.4 mm nozzle).What to Provide Source file (Fusion 360 / SolidWorks / Onshape or other parametric CAD). STL. STEP. All dimensions must be parametric for further editing. A few days will also be needed for test printing before closing the project.
A new version of the existing corner modular shelf for storage needs to be developed. The provided model can be used as a basis (I will send the model to the performer), but the design and construction should be changed according to the requirements below. General Concept The shelf is intended for installation in the corner of a room and should be modular. Several identical modules are installed on top of each other and securely fixed together. The main style is modern minimalism with smooth lines and large rounding radii. Dimensions Size on each side adjacent to the wall: 230 mm Height of one module: 100 mm The wall thickness should be optimized for FDM printing (approximately 2.5–3 mm).Front Part The front edge should be significantly lower than in the original model. Goal: to ensure free access to the contents; the user should be able to reach items even from the bottom shelf without removing the upper modules. The front cut should be made with a smooth arc. No sharp corners.Side and Back Walls The height of the side and back walls should remain almost full. All outer corners should have large roundings. Module Connection A hidden connection system needs to be implemented. It is currently visible. On top of each module: guides/mounting holes. On the bottom: matching pins. After installation, the module should: automatically center; not shift sideways; not rotate. The connection should be as inconspicuous as possible from the outside.Internal Part The bottom should remain flat. No partitions should be made inside for now (there is a visualization of the concept attached). (Partitions will be a separate task later.) Construction The model must be fully suitable for FDM printing. Mandatory: no supports; no overhanging elements; no complex bridges; no separate parts. The shelf should be printed as a single piece.Design No decorative textures should be used. Surfaces should be smooth. Large smooth radii are welcome. The shape should look modern and premium.What to Provide Source file (Fusion 360 / SolidWorks / Onshape or other parametric CAD). STL. STEP. All dimensions should be parametric for further editing.