Optimization and editing of a 3D model for printing
It is necessary to optimize the 3D model of the desktop fountain (woman with a jug) for FDM 3D printing.
This is a functional model:
uses an aquarium pump
water flows through the internal channel
water spills from the jug
Available formats:
STL, FBX, OBJ, BLEND
My setup:
printer: BambuLab P1S
slicer: Bambu Studio
nozzles: 0.4 / 0.6 / 0.8
The model consists of 2 parts:
Bowl (base / bowl)
Statue (woman with a jug)
GOALS:
Reduce printing time
Reduce the amount of supports
Fix problem areas
1 - TASK — BOWL
1.1. Add texture
Add texture of ancient stone (send recommendations)
Requirements:
no fine noise (should print well)
looks good with a 0.8 mm nozzle
only the outer surface
without the need for supports
1.2. Joint bottom ↔ wall
Problem area: layers 2–27
Needs:
redesign the transition
remove sharp 90° angles
add a smooth radius (fillet)
1.3. Print optimization
Reduce printing time
If possible, reduce material consumption
Preserve:
strength
tightness
2. TASK — STATUE
2.1. Reduce supports
Analyze geometry:
reduce overhang
slightly change the shape if necessary
Do not spoil:
face
hands
jug
overall silhouette
2.2. Alternative — supports
(see file: 2_PRESUPPORT.stl)
If redesign does not yield results:
make better supports with minimal marks on the surface
2.3. Water supply channel
Redesign the inner tube so that it prints without supports
Problem area is layers 368–372
Needs:
remove weak layer connections
create stable geometry
maintain normal water flow
2.4. Print optimization
Reduce printing time
Can simplify hidden or insignificant details
Must leave:
face
hands
jug
WHAT IS NEEDED AT THE OUTPUT
Updated files:
STL (ready for printing)
BLEND (edited)
Brief recommendations:
orientation for printing
supports (if needed)
which parts to print with which nozzle
-
2 days45 USD
529 2 0 2 days45 USD
Good day. I am engaged in creating and preparing models for 3D printing. I have my own printer P1S, so I understand what you are talking about. I uploaded and reviewed the model. Making an internal channel without a sharp angle is not a problem. With supports, it's a different matter; we need to discuss some points. Can we separate the figure of the woman and the base, make them connectable, and change the shape of the lower base to reduce supports? I am ready to do everything in 1-2 days depending on what we agree on.
-
7 days67 USD
826 7 0 7 days67 USD
Ready to complete the task. I understand the nuances because I have my own 3D printers and CNC. The task is clear, we will select the design, and if necessary, you will make adjustments.
-
2 days67 USD
1506 6 0 2 days67 USD
Good day, Pavlo!
I am interested in your project and I am ready to take on its execution. I have extensive experience in developing models for printing - I am happy to help.
My similar works:
1) Model of the city of Philadelphia
Behance
2) Model of a supercar
Behance
…
Other examples:
Behance
Feedback for a similar project:
https://freelancehunt.com/project/shukayu-spetsialista-po-3d-modelyuvannyu-dlya/1477973.html
Open to communication and discussion of details.
-
1 day45 USD
1099 5 0 1 day45 USD
Good day. I will gladly join your project and create 3D models for printing. The price is indicated per working day, we will discuss all the details in personal messages.
-
3 days111 USD
493 4 0 3 days111 USD
Hello, I have reviewed the models and am ready to propose collaboration. I have 8 years of experience in 3D modeling and also have experience in modeling for 3D printing.
-
Добрий день, Павло! Перед виправленням технічних моментів у Вашій моделі, потрібно виправляти анатомію та пропорції, щоб вона була бездоганна.
-
Дякую за ваш коментар. Можемо це обговорити
-
Можу підказати декілька помилок. Звертайтеся! Буду рада виявитися корисною
-
Current freelance projects in the category 3D Modeling
Create a 3D visualization of testing equipment
67 USD
It is necessary to create a 3D visualization of the test equipment. All details are in the document. The document also contains additional explanations and visualizations. 3D Modeling, Photo Processing ∙ 4 hours 56 minutes back ∙ 16 proposals |
Backpack design*Backpack design: visualization and 3D model** Looking for a product designer or industrial designer with experience in accessories, bags, or gear. **What needs to be done:** — Develop the appearance of the backpack based on my references and wishes — Prepare high-quality… 3D Modeling, AI Art ∙ 22 hours 58 minutes back ∙ 5 proposals |
Designing parts (pads for a bag for 3D printing)
22 USD
A 3D model of a dismountable last for assembling a bag needs to be developed for subsequent printing on a 3D printer. Initial data A hand sketch with the main dimensions. The width, height, and taper parameters of the last (in the sketch photo) A DXF file with the outline of… 3D Modeling, Object Design ∙ 1 day 7 hours back ∙ 11 proposals |
Visualization of a chair
45 USD
There is a 3D model of a chair. Changes need to be made to the backrest and the fabric on the seat needs to be replaced. It should be made as similar as possible to the photo. I am attaching the photo. I will provide more detailed specifications with links to the fabric textures… 3D Modeling ∙ 2 days 8 hours back ∙ 46 proposals |
3D model of a "banana" bag with a die-cut handleTask: 3D model of a "banana" bag with a die-cut handle (for interactive mockup)1. Purpose A parametric 3D model of a polyethylene "banana" bag with a die-cut handle. The model will be used in a web viewer (Three.js / glTF) for an interactive mockup: the client's print layout is… 3D Modeling ∙ 2 days 8 hours back ∙ 2 proposals |
Lvov