3D printing
75 USD 
Hello, we need to create a power supply unit for Fixiki workshops.
Project specifications: working dimensions are 480x480x240 mm. Printing can only be done with dimensions of 240x240x240 mm, so a connection must be made for two plates top-bottom and right-left, resulting in a rectangle measuring 480x480x240 mm. These are the external finished dimensions. Inside, there should be space for five batteries. You need to consider and place in the housing of the future power supply unit DS-DS modules of various types and sizes, approximately 15 pieces, and a 24-volt inverter to 220 volts. Dimensions and all other details will be discussed via personal correspondence.
requirements for the contractor ...
You need to think through the placement of all electronic devices and the layout of all equipment.
Preferably, you should have knowledge in: electrical engineering, electronics, engineering, strength of materials, circuit assembly, and airflow geometry for ventilating all this equipment.
Ultimately, the result should be a power supply with the following characteristics: output voltage from 1 to 120 volts at a current from 0.5 to 100 amperes, with a step frequency of 0.5 volts and 0.5 amperes, 24 volts AC to 220 volts AC, modified sine wave. Power up to 2000 watts.
Dimensions and all other details will be discussed via personal correspondence.
Most importantly, the price is negotiable after an initial conversation or correspondence via VAP or the platform.
Applications 1
Current freelance projects in the category 3D Modeling
Create a visualization of the future product
We are currently creating a frame for a balloon that will be "held" by a metal fist. I am attaching photographs of the actual fist. The height of the balloon is 4.7 m, and the width is 4.2 m. The dimensions of the fist are approximately 1.9*1.9*1.9 meters in plan. I need to… 3D Modeling, Photo Processing ∙ 11 hours 30 minutes back ∙ 17 proposals |
Creation of a model and drawings of the hearth
A 3D model of a fire pit is required as shown in the photograph for further production. The model should be divided into 2 parts - the body separately and the fire pit itself made of reinforcement for the possibility of further separate scaling. The total height with the base is… 3D Modeling, Object Design ∙ 11 hours 39 minutes back ∙ 7 proposals |
Create a ready 3D model of the sign "How To Make Tea" for 3D printing (Bambu Studio)Need to create a complete 3D model based on the attached image-instruction "How To Make Tea". The final result should not just be an image, but a fully prepared model for 3D printing. Requirements: Create a 3D model of the plaque/plate according to the design from the image All… 3D Modeling ∙ 1 day 9 hours back ∙ 23 proposals |
Draw a detail in Compass
68 USD
There is a ZPN-250 loader Here it is on the manufacturer's website: https://agniy.kz/product/zernopogruzchik-navesnoj-zpn-250/ There is a complete set of drawings made in Compass (archive 116 MB) It is necessary to modify part of the loader, namely, to make a receiving hopper… 3D Modeling, Drawings & Diagrams ∙ 2 days 9 hours back ∙ 6 proposals |
Refinement of the facade design of the cafe building
83 USD
Facade correction and 3D visualization 1. Object: Reconstruction of a building for public catering (cafe), area 262 sq.m. 2. Sources: Sketch project (PDF) + working files (DWG/Revit). 3. Style: Modern (minimalism/loft), flat roof, 1 usable terrace. 4. Task and zoning (for 3… 3D Modeling, Architectural Design ∙ 2 days 19 hours back ∙ 16 proposals |
Boguslav