Budget: 250 EUR Deadline: 7 days
Ready to perform. Design engineer with experience since 2008. Hourly rate is 8 euros.
Job essence:
There is a sketch project of a one-story house (140 sq.m) in pdf. The wall technology (frame) has been chosen and the dimensions have been changed. The layout of non-load-bearing walls has been modified in SketchUp. The layout and concept have been approved. A professional draftsman is required to transfer the project to AutoCAD (2D) with "clean" lines from scratch, correct geometric inaccuracies, and prepare drawings for builders.
Important subtask (Normalization of dimensions):
The project in SketchUp was created during the creative stage, so there are inaccuracies (for example, cabinets 603 mm, openings 815 mm). The contractor needs to independently round and normalize all dimensions according to construction and furniture standards (door openings strictly according to the specifications, kitchen bases 600/450/300 mm, walls without random distortions in millimeters).
What needs to be done in the First (basic) version of the project:
1. Wall layout plan without furniture (there will be a frame): taking into account the thickness of the "layers" of the walls (data will be provided). Clear dimension chains (axes, openings, piers).
2. Plan with furniture and plumbing arrangement: all furniture and plumbing must be placed on a separate layer so that they can be turned off with one button. Furniture should be tied to standard dimensions.
3. Foundation plan (top view) with embedded sewerage: executive sheet for builders. Accurate linear ties (coordinates) of the sewer pipe outlets and embedded sleeves relative to the corners of the foundation/axes.
Payment and stage conditions (Important!):
Stage 1 (Fixed price): Creation of a basic clean version of DWG from my source materials with normalization of dimensions (as described above).
Stage 2 (Time & Material / Hourly payment): After the delivery of a quality first version, adjustments to the layout may be made according to my new requests. These corrections will be paid separately at an agreed hourly rate or for fixed packages of revisions.
Please indicate two prices in your response: the cost of the First stage and your hourly rate (or the cost of one round of revisions) for the Second stage.
What I provide:
1. Plan in pdf with dimensions of the house and rooms before modifications
2. Link to the SketchUp project or export of this file.
3. Thicknesses and materials of the walls. Standards for rounding (what openings are needed for doors, thickness of kitchen countertops, etc.).
Technical requirements for DWG:
AutoCAD version no higher than 2018/2020.
Drafting strictly in "Model" at a scale of 1:1.
Ideal layer hygiene: axes, walls, dimensions, furniture, text - all on strictly separate and clearly named layers.
No garbage or broken blocks.
Budget: 250 EUR Deadline: 7 days
Ready to perform. Design engineer with experience since 2008. Hourly rate is 8 euros.
Budget: 180 EUR Deadline: 3 days
I can participate.. If by "under the pledges" here it is meant the releases of sewage pipes. The final result - 1 plan sheet in AutoCAD.
Budget: 140 EUR Deadline: 3 days
Hello.
I will do the work quickly and efficiently.
I have extensive practical experience.
I work on architectural and construction projects, developing concepts of varying complexity, 3D modeling, 3D visualization, 3D video animation, project presentations, interior and exterior design, video editing, as well as product design, and furniture prototype development (the developed and produced prototypes were taken to the International Furniture Fair in Canada, and later went into mass production), industrial design for mass production (the developed street lamp was installed in large quantities in various cities in different countries), and product listing. Excellent knowledge of ergonomics and regulatory frameworks in the field of construction design. Extensive practical experience. A creative approach to work. I work with 3ds Max+V-Ray+Corona, SketchUp+V-Ray, AutoCAD, Revit, Photoshop, Lumion, After Effects, Archicad. My portfolio: https://3ddomkiev.wixsite.com/website-2
Budget: 990 EUR Deadline: 30 days
Greetings, I have experience in designing building territories and houses. Examples of work - Google Drive
First stage - schematic plan of the site with the building footprint + house planning - preliminary 990€, duration - from 30 days.
Second stage - from 6€/m² of the total area of the house premises for one architectural solution option, list of drawings - site plan, floor plans, roof plan, facades, sections. Duration - from 40 days. Partial advance payment. The final list of drawings, time, and price will be agreed upon.
Budget: 70 EUR Deadline: 4 days
I will complete the task according to the clear specifications. Revisions on the project are 5 euros/hour.
Budget: 98 EUR Deadline: 3 days
I will do the work according to your requirements, I work in AutoCAD.
Budget: 80 EUR Deadline: 2 days
Hello! I have sufficient practical experience in performing similar tasks! I work layer by layer, everything will be done qualitatively and according to the technical specifications! We can discuss details and additional wishes in private.)
Budget: 100 EUR Deadline: 10 days
Good day!
I am ready to complete your project. I work in AutoCAD and have experience preparing architectural drawings for construction. I will carefully transfer the model from SketchUp to a clean DWG, correct any geometric inaccuracies, normalize all dimensions according to building standards, and prepare a clear set of drawings.
I can perform:
- a layout plan with dimension chains;
- a furniture and plumbing plan with proper layer organization;
- a foundation plan with embedded sewer connections and necessary references;
- formatting of drawings in a builder-friendly manner.
I work attentively to detail, am always available, and adhere to agreed deadlines. I am ready to start work immediately after receiving the source materials (PDF, SketchUp, and specifications).
I look forward to collaborating!
Budget: 250 EUR Deadline: 5 days
Good afternoon. I will create clean, precise drawings of 3 plans in AutoCAD, with all necessary dimensions and symbols. The price for the first stage is included in the bid. Revisions - 5 euros/hour.
Budget: 250 EUR Deadline: 5 days
Hello! I am a design engineer with over 5 years of experience in AutoCAD. The price I indicate is for the first stage. I perform the work precisely according to the dimensions and taking into account all requirements, making adjustments if necessary. The second stage - the price is 15 euros/hour.
Budget: 150 EUR Deadline: 3 days
I have a lot of experience in performing similar tasks. I also calmly accept further revisions, the need for detailing specific nodes, and adjustments. The price in the bid is indicated for the first stage. Revisions and other changes will be discussed separately depending on their quantity and complexity.
Буду делать работу очень медленно и очень дорого (конкретная цифра родится после определения задания и количества исходных данных), но обещаю, что комплект документации будет полным и вопросов у Подрядчика не будет.
A technical or design project is needed to start the renovation of a residential building with an area of 69m2. The layout will be attached below.
It is necessary to make notes in AutoCAD on the completed project, as well as to add a table to the project based on the completed work reports.
Welcome! We are looking for an experienced company, design bureau, or high-class specialist (architect/structural engineer) to develop a complete design project and set of working documentation (drawings) for our new attractions. We need not just a beautiful visual, but a ready technical solution that builders and installers can use to implement the project from start to finish. What will be included in the tasks (Scope of work): Concept and visualization Planning solution Working documentation (for builders) Our requirements for the contractor: Availability of a portfolio Ability to work in professional software Understanding of construction technologies, materials We look forward to your responses! Let's create an awesome project together!
It is necessary to design solar stations on a permanent basis - both large and small. Layout of panels, calculation of generation in PV syst, selection of main and electrical equipment (this is preferable).
A model of a house needs to be placed on the plot and the real dimensions of the plot should be tied to the plan. The results with AI are not good. An example is in the photo. A rough version is needed, but as close to the original as possible.