Interior design project of a bathroom 6–7 m² (ArchiCAD + 3D visualization + drawings)

Hello! An interior design for a house is planned, and a visualization of the interior needs to be created based on references and style. There is no need to create communications, etc., just the visualization of furniture, wall colors, and the placement of appliances. I will provide references (photos of furniture), layout schemes, and room plans. There are 5 rooms, with an area of about 75 square meters. Images with visualization and a top view are expected. Minor adjustments to the interior may be possible.

1. A texture of grass needs to be added to the base (where there are no stones). The main thing is that the surface should not remain completely smooth, but have the relief of grass, so that after painting it does not look like just a flat green disc. Make the base slightly smaller and thinner, following the example of another already finished figure (since they are from the same series and should look similar). 2. Completely smooth out the indentations/markings on the tail, body, and eyes that indicate the places for stripes, spots, and pupils. The surface in these areas should be simply smooth for manual painting. 3. The shape of the fingers and claws on the paws needs to be redesigned. The current ones are too massive. They should be made as similar as possible to the illustration from the file hunterconcept.jpg. 4. Quality cutting for 3D printing.

Congratulations! I am looking for an experienced CAD engineer / CNC modeler with artistic taste to translate an author's graphic sketch into vector drawings for production.The material for the future product will be colored ceramic tiles and natural stone. The elements will be cut on a waterjet cutting machine and decorated on a CNC milling/laser engraving machine.Main project parameters: Base for work: Work is strictly based on the attached author's sketch (panorama of Gdańsk, slightly elevated view). The overall composition, density of development, and rhythm of roofs must be preserved. Dimensions of the finished panel: The final size of the entire picture is 29.5×42 cm (A3 format). Stylistics: It is important to maintain the effect of hand-made. Avoid perfect computer geometry and serious perspective. Lines should be lively, with a slight artistic curvature (imitation of ancient mosaics). Scaling and optimization: Since the overall size of the panel is small, the designer has the right and must simplify small architectural details, change their size, and avoid critically thin areas (the minimum thickness of any physically cut detail, such as a pipe, should be at least 3–4 mm to prevent material from breaking).Technological requirements for construction (Puzzle and Layers):The panel will be assembled from materials of different thicknesses to create a physical 3D volume. Elements need to be divided by layers and labeled in the drawings with the following thicknesses: Background (rear row of houses): Thickness 5 mm. They connect with the middle plan with a minimal optical gap. Bare winter trees at the very top do not need to be cut out – they are designed solely as lines for laser engraving on the background plate of the sky. Middle plan (central row of houses): Thickness 6.5 mm. Foreground (front row of houses): Thickness 8 mm. Drain pipes: Designed as separate parts with a thickness of 10 mm (they should protrude above the entire panel). Insert windows (for the lower and middle rows): Each window is designed as a separate physical part, inserted into the grooves of the walls with minimal gap (optical seamless joint). For the rear row (5 mm), the micro-sized window is made exclusively with a through cut or deep engraving.What should be delivered (two types of programs/layers in DXF/DWG): Program No. 1 (Waterjet contour cutting): All outer contours of the parts (houses, pipes, white windows) taking into account the technological gap (play) between adjacent houses of 1.5 mm (to create an artistic mosaic joint). Program No. 2 (Milling/Surface Engraving): Layer "Deep": Cornices, window sills, door portals, balustrades. Layer "Medium": Large contours of windows, relief of tiles on roofs. Layer "Thin": Mullions of window frames, bricks on chimneys, artistic cracks on walls for an antique effect.For details and clarification of the facades' plasticity (entrance groups, pediments), real photographs of Gdańsk from the internet can be used (views of streets Długa, Mariacka, Piwna from above).Safety and copyright: Before transferring the technical specifications to the contractor, confidentiality conditions (NDA) are agreed upon. All rights to the developed files fully transfer to the Client. Publication in a portfolio or use of files for external purposes is prohibited.Please indicate the cost and timeline for developing the starter set (test 1-2 houses), as well as the estimated cost of the entire A3 panel. Attach examples of your work for CNC/laser The estimated budget for developing such a drawing is $500 USD. Additionally, I would be happy to consider an offer for manufacturing such a product on waterjet and engraving CNC equipment and place a larger order.

Greetings. Development of a premium 3D model of a wooden memorial product for CNC production Project description A custom design of a premium wooden memorial product needs to be developed for further manufacturing on a 5-axis CNC. The project should not resemble classic memorial products. The main idea is a modern minimalist design. The product should look like a solid sculpture without wide frames and unnecessary decorative elements. Tasks Create a high-quality 3D model. Ensure the possibility of production on a 5-axis CNC. Design the body and lid. Consider a hidden seam line. Include hidden hinges and locks. Create an internal cavity according to standard internal dimensions. Execute the model with correct slopes and radii for wood processing. Style Minimalism. Premium design. Maximally smooth shapes. No sharp corners. No wide frames. Solid streamlined surface. Material Main material: oak; ash; walnut. Wall thickness should be suitable for manufacturing from solid or laminated wood. Result The following should be provided: STEP; STL; IGES (if possible); source CAD file; high-quality renders; drawings with main dimensions. Desired skills of the performer SolidWorks; Fusion 360; Rhino; Autodesk Inventor; Fusion CAM; experience in modeling wooden products; understanding of model preparation for CNC. Important A performer with experience in creating premium-class products and industrial design is needed. Ready to sign an NDA (non-disclosure agreement) before providing detailed technical specifications and references. Having a portfolio with complex organic or industrial forms will be an advantage.

Task: It is necessary to develop an accurate 3D model (in STL format) of a two-component box for storing bank coin rolls. The box consists of a bottom part (base with cells) and a deep top lid. Main requirements: Configuration: A box with a square grid of cells 5x5 (a total of 25 rolls). The appearance is similar to the attached photo example but recalculated for 25 slots. Box dimensions: The overall external dimensions of the closed box must be strictly 160 x 172 x 72 mm. Cell sizes and ergonomics: The model is designed for rolls with dimensions: diameter — 24 mm, height — 62 mm. The diameter of the cells should include a technological clearance (approximately +0.5 mm) so that the rolls fit freely. Important: The depth of the cells in the lower block must be such that the inserted roll protrudes from the bottom of the box upwards by 15–16 mm (i.e., the depth of the cells is about 46–47 mm). The top lid must be deep enough inside to completely cover this protruding part of the rolls when the box is closed. Construction and hinges (for STL): Rounded external vertical corners of the box (as in the photo). Integrated hinges on the back wall with a through coaxial hole diameter 3 mm for assembling the halves of the box using an M3 screw or pin are needed. No fastenings or recesses for a latch on the front wall are needed — the front panel should be solid and flat. The texture of roughness is NOT needed. In your responses, please indicate the final cost for the work and estimated completion time. I need two finished STL files (base and lid) as a result. Thank you! Note: The attached photos are taken from an open advertisement as a visual example (reference) of the design. I do not need an exact copy of someone else's product — it is necessary to develop an individual model from scratch strictly according to my dimensions (for 25 cells) and without fastenings for a lock.