Budget: 8000 UAH Deadline: 10 days
Good day. I would be happy to develop a sketch project with visualizations and working drawings. I am a practicing landscape architect with extensive experience.
Good day!
It is necessary to develop a project and visualization of landscape design for a garden plot (4 acres) next to the forest. There is a garden house and a garage on the plot. The plot is on a slope. A separate small bathhouse and barbecue area are planned.
+ separately planning a small extension to the garden house (bathroom)
Budget: 8000 UAH Deadline: 10 days
Good day. I would be happy to develop a sketch project with visualizations and working drawings. I am a practicing landscape architect with extensive experience.
Budget: 15000 UAH Deadline: 14 days
Good day, Maxim. I will do it well. Examples of my work here Behance. I am currently developing a similar project near Kyiv. Do you have photos and a layout of the site?
Budget: 12000 UAH Deadline: 10 days
Hello. A month ago, I completed a sketch project and visualization of a recreation base in the forest and by the river. Therefore, I can easily create a project and visualization of your plot with the necessary buildings and landscaping elements with greenery. I can send examples of my work via private messages. I will complete the work within the established deadlines.
Budget: 15000 UAH Deadline: 15 days
Good day! I am ready to take on the project! I can offer a visualization with the possibility of a real-time walk, or an animation taking into account the season and time of day. I have understanding and experience in performing similar work. The cost and deadlines for the project will not be affected by the animation, as I am introducing a new program "into life."
Budget: 10000 UAH Deadline: 7 days
Good day.
I am ready to help you!
Examples of my work:
https://freelancehunt.com/showcase/work/genplan-dilyanki-pid-taunhausi/1879659.html
https://freelancehunt.com/showcase/work/budinok-na-pagorbi/1875852.html
Feel free to reach out!
Budget: 12000 UAH Deadline: 15 days
Hello, Maxim. I offer architectural services with 20 years of experience in the field of architecture and construction for the development of landscape design and site improvement, 3D visualization, execution of drawings - General plan, vertical planning, layout drawings, planning of surface water drainage systems, if necessary, underground drainage, design of paving, lighting systems, automatic irrigation systems, landscaping, development of small architectural forms, etc.
Two higher education degrees in construction and architecture, as well as extensive experience in implementing construction projects, allow for evaluating and considering all aspects of the design of the future object already at the stage of data collection.
The final cost and execution time depend on the required project composition and the level of detail in the development. An example of similar work on site improvement and project composition is provided in the Portfolio. Behance
Behance
Behance
Budget: 13000 UAH Deadline: 50 days
Good day. I am engaged in visualization and landscape design and have extensive experience in similar projects.
Both photo and video visualization are possible.
The price and deadlines are approximate; I will be able to provide more accurate information after clarifying the technical specifications.
We can communicate in private messaging to clarify all details and form a precise price and deadlines.
Examples of completed works can be seen at the portfolio links:
Freelancehunt Freelancehunt
https://youtube.com/channel/UCLCH7MAlLd_pL4vaNahqKWQ
https://youtu.be/FuL4rSZ8Bsg?si=g7UmEDAcbSl6MHO1
https://bytkovskij.github.io/360-tur-Artem/
Budget: 8000 UAH Deadline: 14 days
Hello, I am a fourth-year student of landscape architecture. I have experience in garden planning, I am familiar with modern trends and plantings. I will gladly help with the request. Google Drive
Budget: 5000 UAH Deadline: 14 days
Good day, I can help you, examples of work in my profile.
Budget: 8000 UAH Deadline: 14 days
Interesting. I can create a draft project, taking your wishes into account.
Budget: 12000 UAH Deadline: 28 days
Good day! Ready to discuss Behance
Budget: 27000 UAH Deadline: 60 days
Good day, we can develop a project from concept to working project with all the details. The price and deadlines are negotiable and approximate. We are the landscape bureau MASHTAB, which has been creating cozy gardens and urban spaces for over 5 years; I can send examples of projects and a portfolio in a message if you are interested. Our specialization is landscaping and urban design.
We also need more input data; I can clarify this information in personal messages as well.
Budget: 25000 UAH Deadline: 16 days
Welcome!
We are the interior design studio YUKHO.
Experience: 3+ years
We will gladly execute your project!
We work with landscape designers and will develop a quality, stylish, and individual project for you.
By the way, we are locally based in Uzhhorod, so we can meet at the site and discuss everything in detail.
More about our work: Behance
Budget: 1000 UAH Deadline: 7 days
Good day.
I offer my services in design and visualization development. Feel free to contact me, we will discuss.
The cost is conditional.
Portfolio - Behance
Sincerely, Mykola.
A project for a stove is needed, with a layout for two floors. On the first floor, a solid fuel stove for large firewood, one meter long. On the second floor, either a stove or a fireplace with gas channels for heating the second floor. Between the floors, there is a reinforced concrete slab, hollow. Above the second floor, there is an attic. On the second floor, the stove should be plastered, while on the first floor, it can be without plaster. Dimensions First floor Height 2200 mm from the floor to the slab Maximum width 1150 mm Length is not limited Second floor Opening in the wall 2100*2300 (height) Width up to 1200, the smaller the better. I am open to any options! The first floor is a basement. The area of the house is 120 m². The stove on the first floor is designed to heat a buffer tank of 600 liters for the underfloor heating on the second floor. The stove on the second floor serves as additional heating during the off-season, provided there is a fuel chamber. In the case of a stove, it serves as additional heating for adjacent rooms.
Vectorization (digitization) of the paper reconstruction project (115 sq.m) and registration in the EDESSB Task description: I am looking for a certified design engineer (or architect) with a valid qualification certificate and experience in the EDESSB office for digitizing and entering the completed reconstruction project into the system. Initial data of the object: Object type: separation of part of the premises of the former dormitory into a separate residential apartment. Area: 115 sq. m. Documentation status: there is an old, fully approved paper project (construction intentions) developed by a municipal architectural planning enterprise. The project has not been uploaded to the EDESSB system before (has not been digitized). Legal basis: there is an official and valid decision of the executive committee of the city council granting permission for reconstruction, the object has already been officially assigned an apartment number (address). Communications: all old paper approvals from the Fire Service, Sanitary Inspection, and City Gas (Gorgaz) are available. All networks are physically connected, metering devices are installed, and supply contracts are active. What specifically needs to be done (Scope of work): Vectorization (digitization): Redraw architectural and planning solutions from the paper archive into electronic form (PDF/DWG formats) according to current standards for graphic material design. Formation of the case in EDESSB: Create a project card in EDESSB and legally correctly attach the existing initial data: the executive committee's decision and old paper approvals from the services. Entry without new TU/MUO: Since the networks are existing and the re-planning occurs within the capital walls, the project is uploaded based on the CMU Resolution No. 406 (without issuing new TU and MUO). It is necessary to correctly fill in the declarative fields in the system to avoid blocks. Registration: Sign the project with your electronic signature and generate a registration number for the project with a QR code for the client for further submission of the Notification of the start of construction works in "Diia". Requirements for the performer: Availability of a valid certificate (I will check in the Register of certified persons). Successful experience in "processing" similar archival objects/reconstructions through EDESSB without new TU. CRITICALLY IMPORTANT CONDITION (REGARDING THE ENTRY METHODOLOGY): Please do not offer to develop a new project from scratch under modern standards at the full commercial design rate. The object has 100% ready, approved solutions in the capital walls. The task is specifically about updating the information of the old project (Stage P) through vectorization (according to the Procedure for maintaining EDESSB). Please base the work on official algorithms for entering "old" architectural solutions into EDESSB, which are currently widely discussed at professional workshops (for example, methods for supporting and digitizing archives from CLC PRO Group / PRO InfoBud). PRO InfoBud / Consultations / Commissioning / How to update information in EDESSB: guide for "old" permits. https://proinfobud.ua/yedessb/aktualizatsiya-vidomostey-yedessb-stari-proekty/ A vectorized plan is uploaded to the system, and the current decision of the executive committee and the paper letter from 2006 with wet seals from the city architect, the Ministry of Emergency Situations, and Gorgaz are attached as legal initial permit grounds. The program will not require new TU and MUO, as the project card indicates the absence of the need for new connections. A specialist is needed who clearly knows this technical toolkit of the EDESSB office. clcgroup.com.uaWorkshop “Entry and updating of “old projects” in EDESSB”https://clcgroup.com.ua/blog/aktualizatsiya-vidomostej-v-yedessb-shhodo-starih-proektiv/ Please indicate in your bids the final cost for the entire turnkey work (including uploading to the system) and realistic deadlines for completion. It is necessary to digitize the ready solution; there is no need to invent architecture or construction from scratch.
Wooden terrace 7x4.5m with a frame wooden sauna 3.5x2.25m and a tub. The terrace is located on a plot with a slight slope. It is necessary to calculate the structure of the terrace (made of wood; the site is in the mountains - high snow load), calculate the structure of the sauna, develop a 3D model (photorealistic renders are not needed) and prepare drawings (facades, sections, site plan). A small complication: the documentation and drawings must comply with a specific format. Nothing special, but markings, colors of materials, and other details must adhere to a certain format. I will provide samples. In the attached files, there is an unfinished model for a general understanding of the concept.
A technical or design project is needed to start the renovation of a residential building with an area of 69m2. The layout will be attached below.
It is necessary to make notes in AutoCAD on the completed project, as well as to add a table to the project based on the completed work reports.