Project for a hip roof
134 USD It is necessary to design the roof of a frame house
Hip, the roofing will be wooden shingles
A simple drawing with calculations for loads is needed
What is the section of the beam, what is the step, what is the angle?
Applications 1
Client's review of cooperation with Serhii Petelguzov
Project for a hip roofA big thank you to Sergey, everything was discussed in detail, several execution options were proposed, everything was done quickly and efficiently. I recommend it to everyone!)
Freelancer's review of cooperation with Sergey Stetsenko
Project for a hip roofThe collaboration was conducted at a high professional level.
The client clearly formulates tasks, is open to constructive dialogue, and is genuinely interested in receiving not just a formal drawing, but a thoroughly developed and justified solution.
During the work process, a serious approach to the project is felt, along with an understanding of the importance of constructive logic, not just external geometry.
Payment is timely, and the interaction is calm and correct.
I recommend for collaboration.
-
7 days89 USD
371 4 0 7 days89 USD
Hello, Sergey!
I offer my services. Examples of work - see portfolio.
Feel free to contact me!
-
7 days156 USD
382 7 days156 USD
Sergiy, hello! I can complete your order. I suggest discussing the price and deadlines in private messages after agreeing on the details. I will send samples of similar work if necessary. Feel free to reach out.
-
7 days111 USD
4495 29 2 1 7 days111 USD
Hello. I am ready to complete the roofing project. I will create structural drawings for the roof, a specification for the lumber, calculations for the section, the spacing of the rafters, etc. I will provide clear drawings for installation. Feel free to contact me....
-
7 days67 USD
1106 10 0 7 days67 USD
Hello.
I am ready to complete the project, calculate the rafters and roof slope. I can also create a 3D model if needed and prepare the drawings. We can discuss the details in messages.
-
5 days223 USD
4382 61 0 1 5 days223 USD
Hello Sergey,
To accurately (optimally based on materials) calculate your roof, we need to discuss many clarifications, such as:
1. The location of the house (depends on snow and wind loads)
2. All openings in the roof (for ventilation, chimney, etc.)
3. We need your facades to determine what slope you want or what height you need for the cold or warm attic?
4. In the center on the side with a radius of 2000 mm, is this a porch canopy or is it a bay window with the corresponding roofing solution on the roof (decide whether it needs to be calculated or if you drew it for your understanding),
5. Are the additional lines the terrace and the entrance porch?
We are ready to perform the entire volume of calculations and drawings, namely:
… 1. Calculation of the wall plate
2. Calculation of the rafters and their spacing
3. Calculation of the ridge beam and ties, if necessary.
4. Drawings and specifications
5. Details as needed or if you do not understand how to assemble this roof.
The cost starts from 10,000 UAH (depending on the clarified data)
Current freelance projects in the category Architectural Design
Develop BIM models of metal suspended ceilings for the manufacturerNeed a specialist for the development of BIM models of metal suspended ceilings We are a manufacturer of metal suspended ceilings: metal Armstrong and rail ceilings. We want to create high-quality BIM models of our products so that architects, interior designers, and planners… Architectural Design, Drawings & Diagrams ∙ 12 hours 35 minutes back ∙ 2 proposals |
Development of a sketch of construction intentions for obtaining a building passportIt is necessary to develop a Construction Intent Sketch to obtain a building passport for a private house, approximately 240m2.What is included in the task (approximate composition):Site development scheme (indicating the location of buildings, setbacks from boundaries, red… Architectural Design ∙ 14 hours 54 minutes back ∙ 7 proposals |
Development of a private house project on a plot of 9 acresIt is necessary to develop a project for a two-story house up to 200 sq.m on a plot measuring 19.5x42m, with working drawings for the placement of reinforcement, sewage, etc. Architectural Design ∙ 1 day 12 hours back ∙ 10 proposals |
AR+KR of the houseIt is necessary to adapt the existing house project to my land plot. What is needed: Based on the provided photos/references, develop an individual house project. Adapt the layout to the needs of the family. Optimally place the house on the plot considering regulatory… Architectural Design, Drawings & Diagrams ∙ 1 day 14 hours back ∙ 15 proposals |
Create renders (visuals) of a commercial propertyDevelop a render (visualization) of a commercial property— a store, adjacent kiosks, parking, access roads, and landscaping. Purely a visualization for creating a commercial proposal for tenants. 3D Modeling, Architectural Design ∙ 1 day 14 hours back ∙ 27 proposals |
Kremenchug