Project for the house
Everything is done as I wanted
I recommend
Good day
It is necessary to redo the project (create a new one) for the construction of a house
I am interested in the project itself and 3D visualization
Situation: Parents want to build a house according to a standard project, I want to propose an alternative to make it more modern and spacious than the stable they envisioned
There is a project plan according to their idea
Budget: 15000 UAH Deadline: 30 days
Good day.
I propose improvements to the existing project, or we can design a new one with built-in enhancements for the future, focusing on energy efficiency and passivity, with maximum practicality and aesthetics that appeal to you.
Budget: 25000 UAH Deadline: 30 days
Good day, I have been designing houses since 2009, I have a diploma and a certificate as an architect. I am located in Novoyavorivsk, Lviv region, a meeting with you and your parents is possible to discuss the future house. I have designed in the village of Murovane near Chervonograd. Samples of my work are in the profile, I will send a link to my Instagram with my works in a message. What I need from you: a geodetic survey at a scale of 1:500, a cadastral number, and a Google location of the plot, drawings of what your parents want to build and what you liked or what you would like it to be - links, pictures, plans, drawings, requirements. Everything listed needs to be sent in a message for review. The payment sequence is 50% advance deposit, 50% upon completion of the work. The cost of developing the construction and architectural scheme (floor plans, sections, facades 1-4) will be 200 hryvnias/m2 or 25,000 hryvnias for a house with an area of 120-150 m2 or less. The development time is 30 days. With this set of drawings, you and your parents will be able to submit documents to start construction and begin building if the house is not too complex. The floor plans show dimensions for wall partitioning and the arrangement of door and window openings, as well as furniture and plumbing fixtures. The section drawing clearly shows the structure, heights, and dimensions of the main building structures such as ceilings, lintels, reinforced belts, mauerlat, and other wooden roof structures. Please feel free to reach out.
Budget: 15000 UAH Deadline: 14 days
Good day. I am ready to help you with the project. I will create a sketch project and visualizations according to modern standards and trends. I have extensive practical experience in designing residential buildings. Freelancehunt
Budget: 15000 UAH Deadline: 10 days
Good day. I am ready to complete your house project. I will take into account all your wishes. There will be plans, a 3D model, and other necessary drawings for you. Feel free to contact me.
Budget: 15000 UAH Deadline: 1 day
Good day! I can create a sketch project, design project, and visualization.
Project example: Behance
Budget: 15000 UAH Deadline: 5 days
Good day.
I am ready to execute the sketch project of your house with visualizations.
We have experience in designing and IMPLEMENTING private residential houses.
We can discuss the details on Telegram.
We can also create a working project.
Budget: 15000 UAH Deadline: 10 days
Good day, we can discuss the details.
Portfolio - Behance
Best regards, Mykola.
Budget: 15000 UAH Deadline: 10 days
Good day. I can offer the development of a sketch project, which will include planning, facades, and a volumetric image of the planned building. We can discuss the details of your project during our communication.
Budget: 15000 UAH Deadline: 25 days
Hello. I can offer a sketch project to start with.
These are plans, sections, facades, visualizations, site layout, visualizations.
By the way, I am currently located in Chervonohrad), so a consultation or meeting is also possible if needed.
If necessary, we can also develop a working project for architecture and construction in the next stage.
Prices depend on the technical specifications and the area of the house and clarification of details. Contact me, and we will discuss.
Budget: 15000 UAH Deadline: 14 days
Interesting project, Yuriy!
We are choosing the direction of the exterior, the vector of movement in creating the house project (not a stable, of course)))
Next, we can discuss the technical specifications.
Details needed: plot dimensions, photos of the area, etc. ...
25 years of experience
I see no obstacles
Feel free to reach out
Budget: 15000 UAH Deadline: 14 days
Good day. In order to assess the project development timeline, a minimum description of what you will need is required: design, budget, site description, and other questions that I am ready to discuss privately.
Here are examples of work.
https://youtu.be/jIeINYsn4sA?si=6-X5bEcY8u5CQmzG
https://youtu.be/VzL4eYphuRU
Budget: 15000 UAH Deadline: 30 days
Good day! I will be happy to fulfill your order. Behance
Доброго дня.
Додайте ваш план будинку, бажано параметри ділянки. Хоча б конфігурацію, а ше краще топозйомку. І якщо маєте референси, то теж додайте.
Бюджет на проектування фіксований, чи обговрюється?
Good morning, I am a real estate agent and while acquiring land for sale, I also have plots that require absorption analysis. I am looking for an architect to prepare such analyses. The scope of the analysis is to be determined. Since the property owner covers this cost, I am looking for a service provider with competitive prices. The plots are mainly for division for single-family housing. Please feel free to contact me if you have any questions fundamentalgrunty dot pl
A project for a stove is needed, with a layout for two floors. On the first floor, a solid fuel stove for large firewood, one meter long. On the second floor, either a stove or a fireplace with gas channels for heating the second floor. Between the floors, there is a reinforced concrete slab, hollow. Above the second floor, there is an attic. On the second floor, the stove should be plastered, while on the first floor, it can be without plaster. Dimensions First floor Height 2200 mm from the floor to the slab Maximum width 1150 mm Length is not limited Second floor Opening in the wall 2100*2300 (height) Width up to 1200, the smaller the better. I am open to any options! The first floor is a basement. The area of the house is 120 m². The stove on the first floor is designed to heat a buffer tank of 600 liters for the underfloor heating on the second floor. The stove on the second floor serves as additional heating during the off-season, provided there is a fuel chamber. In the case of a stove, it serves as additional heating for adjacent rooms.
Vectorization (digitization) of the paper reconstruction project (115 sq.m) and registration in the EDESSB Task description: I am looking for a certified design engineer (or architect) with a valid qualification certificate and experience in the EDESSB office for digitizing and entering the completed reconstruction project into the system. Initial data of the object: Object type: separation of part of the premises of the former dormitory into a separate residential apartment. Area: 115 sq. m. Documentation status: there is an old, fully approved paper project (construction intentions) developed by a municipal architectural planning enterprise. The project has not been uploaded to the EDESSB system before (has not been digitized). Legal basis: there is an official and valid decision of the executive committee of the city council granting permission for reconstruction, the object has already been officially assigned an apartment number (address). Communications: all old paper approvals from the Fire Service, Sanitary Inspection, and City Gas (Gorgaz) are available. All networks are physically connected, metering devices are installed, and supply contracts are active. What specifically needs to be done (Scope of work): Vectorization (digitization): Redraw architectural and planning solutions from the paper archive into electronic form (PDF/DWG formats) according to current standards for graphic material design. Formation of the case in EDESSB: Create a project card in EDESSB and legally correctly attach the existing initial data: the executive committee's decision and old paper approvals from the services. Entry without new TU/MUO: Since the networks are existing and the re-planning occurs within the capital walls, the project is uploaded based on the CMU Resolution No. 406 (without issuing new TU and MUO). It is necessary to correctly fill in the declarative fields in the system to avoid blocks. Registration: Sign the project with your electronic signature and generate a registration number for the project with a QR code for the client for further submission of the Notification of the start of construction works in "Diia". Requirements for the performer: Availability of a valid certificate (I will check in the Register of certified persons). Successful experience in "processing" similar archival objects/reconstructions through EDESSB without new TU. CRITICALLY IMPORTANT CONDITION (REGARDING THE ENTRY METHODOLOGY): Please do not offer to develop a new project from scratch under modern standards at the full commercial design rate. The object has 100% ready, approved solutions in the capital walls. The task is specifically about updating the information of the old project (Stage P) through vectorization (according to the Procedure for maintaining EDESSB). Please base the work on official algorithms for entering "old" architectural solutions into EDESSB, which are currently widely discussed at professional workshops (for example, methods for supporting and digitizing archives from CLC PRO Group / PRO InfoBud). PRO InfoBud / Consultations / Commissioning / How to update information in EDESSB: guide for "old" permits. https://proinfobud.ua/yedessb/aktualizatsiya-vidomostey-yedessb-stari-proekty/ A vectorized plan is uploaded to the system, and the current decision of the executive committee and the paper letter from 2006 with wet seals from the city architect, the Ministry of Emergency Situations, and Gorgaz are attached as legal initial permit grounds. The program will not require new TU and MUO, as the project card indicates the absence of the need for new connections. A specialist is needed who clearly knows this technical toolkit of the EDESSB office. clcgroup.com.uaWorkshop “Entry and updating of “old projects” in EDESSB”https://clcgroup.com.ua/blog/aktualizatsiya-vidomostej-v-yedessb-shhodo-starih-proektiv/ Please indicate in your bids the final cost for the entire turnkey work (including uploading to the system) and realistic deadlines for completion. It is necessary to digitize the ready solution; there is no need to invent architecture or construction from scratch.
Wooden terrace 7x4.5m with a frame wooden sauna 3.5x2.25m and a tub. The terrace is located on a plot with a slight slope. It is necessary to calculate the structure of the terrace (made of wood; the site is in the mountains - high snow load), calculate the structure of the sauna, develop a 3D model (photorealistic renders are not needed) and prepare drawings (facades, sections, site plan). A small complication: the documentation and drawings must comply with a specific format. Nothing special, but markings, colors of materials, and other details must adhere to a certain format. I will provide samples. In the attached files, there is an unfinished model for a general understanding of the concept.
A technical or design project is needed to start the renovation of a residential building with an area of 69m2. The layout will be attached below.