Budget: 3000 UAH Deadline: 20 days
Готов выполнить , быстро и качественно, проект перешлю почтой со всеми печатями или в электронном виде. стаж 10 лет.
Здравствуйте, уважаемые архитекторы и инженеры по строительству.
ТЗ на создание ТЭО на строительство энергоэффективного дома и построек на прилегающем участке
----------------------
Исполнители: 1) архитектор 2) инженер по строительству со специализацией в малоэтажном строительстве 3) технолог по строительству.
Что сделать:
1. Найти и выбрать 2 готовых проекта 2-этажных домов, учитывающих все принципы энергоэффективности (список принципов утвердить с заказчиком) общей площадью 150 кв. м. и 200 кв. м, проекты утвердить с заказчиком.
2. Вписать проекты в участок размером 10 соток, климатическая зона - Московская область, наиболее распространенный тип почвы. Предусмотреть на участке также постройки:
1) ланшафтный дизайн, маленький сад, пруд, малые архитектурные формы, детская площадка - взять типовой проект
2) баня
3) неотапливаемый гараж, встроенный в подвал дома
3. Изменить каждый проект с учетом строительства:
1) из газосиликатных блоков + утеплитель + внешняя отделка
2) из теплоблоков, уже включающих в себя несущий керамзитобетонный слой, утеплитель и декоративный слой; берем случай, когда производятся блоки на своем оборудовании (технико-экономические характеристики такого производства предоставляет Заказчик)
3) с помощью строительного принтера (тип принтера и тех. характеристики заранее согласовать с заказчиком)
4. Требования к каждому проекту:
1) отсутствие необходимости отапливать помещение вплоть до температуры окружающей среды в минус 40 градусов Цельсия. При такой температуре температура в жилой зоне дома должна составлять не ниже 21 градуса.
2) соответствие концентрации вредных газов в жилой зоне помещения европейским саннормам (просчитать эмиссию вредных веществ, довести ее до необходимого уровня)
3) соответствие СНиПам по европейским нормам
4) в каждом случае выбирается наиболее низкостоимстное решение, соответствующее всем требованиям.
5. Создать пошаговую технологическую карту по каждому варианту строительства со сроками, исполнителями и необходимыми финансовыми затратами. Обосновать оптимальный выбор утеплителя для вариантов газобетона и дома, созданного с помощью струйного принтера.
6. Сделать сравнительную характеристику строительства из каждого вида материалов на примере этих 2 проектов домов - плюсы и минусы, по критериям: сроки, риски, стоимость, характеристики дома в процессе эксплуатации.
7. Сделать вывод, какую технологию строительства теплонезависимых домов применять наиболее экономически целесообразно и организационно удобно на данный момент для Московской области для строительства дома с требуемым уровнем теплоэффективности.
Budget: 3000 UAH Deadline: 20 days
Готов выполнить , быстро и качественно, проект перешлю почтой со всеми печатями или в электронном виде. стаж 10 лет.
Budget: 222 UAH Deadline: 14 days
виконаю
Budget: 30000 UAH Deadline: 30 days
Готов выполнить. Все специалисты в наличии. Какой срок вас интересует?
Budget: 111 UAH Deadline: 11 days
Здравствуйте!
Заинтересовал Ваш проект.
Сам я архитектор-проектировщик и у меня есть человек который хорошо разбирается в энергоэффективном строительстве. Предлагаю обсудить сотрудничество.
Job essence: There is a sketch project of a one-story house (140 sq.m) in pdf. The wall technology (frame) has been chosen and the dimensions have been changed. The layout of non-load-bearing walls has been modified in SketchUp. The layout and concept have been approved. A professional draftsman is required to transfer the project to AutoCAD (2D) with "clean" lines from scratch, correct geometric inaccuracies, and prepare drawings for builders. Important subtask (Normalization of dimensions): The project in SketchUp was created during the creative stage, so there are inaccuracies (for example, cabinets 603 mm, openings 815 mm). The contractor needs to independently round and normalize all dimensions according to construction and furniture standards (door openings strictly according to the specifications, kitchen bases 600/450/300 mm, walls without random distortions in millimeters). What needs to be done in the First (basic) version of the project: 1. Wall layout plan without furniture (there will be a frame): taking into account the thickness of the "layers" of the walls (data will be provided). Clear dimension chains (axes, openings, piers). 2. Plan with furniture and plumbing arrangement: all furniture and plumbing must be placed on a separate layer so that they can be turned off with one button. Furniture should be tied to standard dimensions. 3. Foundation plan (top view) with embedded sewerage: executive sheet for builders. Accurate linear ties (coordinates) of the sewer pipe outlets and embedded sleeves relative to the corners of the foundation/axes. Payment and stage conditions (Important!): Stage 1 (Fixed price): Creation of a basic clean version of DWG from my source materials with normalization of dimensions (as described above). Stage 2 (Time & Material / Hourly payment): After the delivery of a quality first version, adjustments to the layout may be made according to my new requests. These corrections will be paid separately at an agreed hourly rate or for fixed packages of revisions. Please indicate two prices in your response: the cost of the First stage and your hourly rate (or the cost of one round of revisions) for the Second stage. What I provide: 1. Plan in pdf with dimensions of the house and rooms before modifications 2. Link to the SketchUp project or export of this file. 3. Thicknesses and materials of the walls. Standards for rounding (what openings are needed for doors, thickness of kitchen countertops, etc.). Technical requirements for DWG: AutoCAD version no higher than 2018/2020. Drafting strictly in "Model" at a scale of 1:1. Ideal layer hygiene: axes, walls, dimensions, furniture, text - all on strictly separate and clearly named layers. No garbage or broken blocks.
It is necessary to carry out architectural and construction solutions, which will include: 1. Replace the windows of the boiler room; 2. Foundations for equipment; 3. Floor in the boiler room: new screed, tiles; 4. Divide the boiler room into two rooms, execute the foundation and wall; 5. Finish the walls and ceiling. The building model is in Revit.
Make a project for the reconstruction of a summer house. Currently, there is a small cold house. I want to add a room. Redesign the second floor. Insulate and install heating distribution. There is gas available.
A design project for a kitchen is needed, around 20 square meters based on the provided dimensions and several generations for better understanding of the layout of the main elements. Please include an example of kitchen design projects in your proposal to understand what you have worked on, along with an estimate and timeline.
It is necessary to lay out the elements of slopes 1000*500 on the roof from the lowest height to the highest, highlighting the elements in different colors for visual appearance for the installer, and add the specification of the elements. The result of the elements can be according to this example. There are 4 different projects like this and ongoing work with such tasks - additionally.