Project translated automatically. Log in or register, to view the original The task is to collect an energy-intense scheme for the autonomous operation of the step engine unit and install the program.Useful materials: Arduino - LilyPad gives 3.3V.Autonomic projects will also require a JeeLib library.This will help push the fee into a deep sleep and will only be if necessary.Example of the engine is the step engine EM527 Shine.( Power voltage V: 2.5 V Stream, A: 0.4 A).The program 1: It is necessary to set the motion of the engine using an ultrasound distance sensor (UZD).When pressing the "automatic" button (tension delivery) within 5 seconds the mechanism to which the ultrasound card is attached begins to activate, and studies the distance from the object to the UHD and if necessary moves the vertical by the wing size of which 26 cm (on 1 full wing turn the mechanism moves by 8 mm, thus the maximum number of wings 32).There is a condition and task: the UZD is located at the starting point of the wing vertically at a distance of 30 cm from the object and attached to the wing.After the object is approaching the ultrasound sensor at a distance less than 10 cm, the engine begins to work and accordingly begins to move on the vertical of the wing, just before the wing reaches the end of the wing, i.e.32 motorcycles.that is.You approach the object - the UZD is moving, you are still approaching - the UZD is still leaving and so it will not make 32 spins.And if you remove the object - the engine moves in the opposite direction and the UHD moves to the lower edge of the wing until the lower edge of the wing is reached, or if the condition is fulfilled the distance between the object and the UHD is equal to 10cm.The UZD should not move up or down beyond the wing.Program 2: The second button “deactivates the machine.”And when you press the "up" button, the UZD rises up to the edge and when you press the "down" button, it is released vertically down.Maximum number of buttons 3.One button to activate/deactivate the machine and 2 buttons “up” and “down”.

Proposals 1 Discussions 1

Vadim Kotsyuba

Winning proposal

6 0

Projects 6
Rating -
Rating 498

Budget: 2000 UAH Deadline: 3 days

I have a great experience in electronics.
We can build work remotely, so that I give recommendations on drawing a scheme and send you the written code and you will check it.
Or you can send all the necessary materials and fees and I will be able to test them in myself on the site.

Aleksandr Ponomarev
Mykolaiv, Ukraine

Projects 3
Rating -
Rating 138

Programming of the step-by-step engine on an energy-efficient driver

Client's review of cooperation with Vadim Kotsyuba

Programming of the step-by-step engine on an energy-efficient driver

5.0

Aleksandr Ponomarev

Freelancer's review of cooperation with Aleksandr Ponomarev

Programming of the step-by-step engine on an energy-efficient driver

5.0

Vadim Kotsyuba

Vadim Kotsyuba

Proposals are currently absent

Current freelance projects in the category Embedded Systems & Microcontrollers

Edit the payment

Google Excel add JS logic in Apps Script

Getaway Siemens IOT Design