Budget: 15000 UAH Deadline: 1 day
Good morning, ready to take the project, this project will be carried out by a certified specialist. The price is not definitive. To discuss the details, write in a private message.
Budget: 15000 UAH Deadline: 1 day
Good morning, ready to take the project, this project will be carried out by a certified specialist. The price is not definitive. To discuss the details, write in a private message.
Budget: 12000 UAH Deadline: 14 days
Good day !
I will be glad to fulfill your task. I work quickly, well and with your wishes.
I had experience with a school roof project like this.
Budget: 10000 UAH Deadline: 14 days
Доброго дня, готовий виконати проект кровлі. Сертифікат інженера проектувальника. Можлива зучтріч в м. Києві
Budget: 20000 UAH Deadline: 40 days
I can develop, I am an architect for more than 38 years, a member of the NSAU, certified architect.
Budget: 30000 UAH Deadline: 14 days
Good day .
I have great experience in construction. I can develop a work project for reconstruction: a project for dismantling, constructive and architectural solutions with nodes, cuts and calculations. The price and term indicated orientatively, i.e. The information provided is not sufficient to understand the exact scope of the work. More detailed ready to discuss in a private conversation.
Budget: 10000 UAH Deadline: 14 days
Good day . Ready to implement this project quickly and efficiently. Write in a private message and we will discuss the details of the work. I will be happy to cooperate!
Budget: 18000 UAH Deadline: 25 days
Hello to Sergey. A certified architect with 20 years of experience in the area of architecture and construction offers its services for the reconstruction of your home.
Two higher education in the field of construction and architecture, as well as the enormous experience of the implementation of the construction facilities allows to evaluate and take into account all aspects of the design of the future facility even at the stage of the collection of the source data.
Portfolio: Freelancehunt
Budget: 20000 UAH Deadline: 14 days
Good day .
Ready for cooperation. I have a lot of experience in building reconstruction.
Details can be clarified in the personal letter.
Examples of my works Behance
Go to turn.
With respect, architect Sergey Belov.
Budget: 15000 UAH Deadline: 10 days
Good day ! I am engaged in the development of work documentation for houses of different complexity.
For a better understanding of my experience, I download a link to the portfolio.
Google Drive
Go back!The !
Budget: 15000 UAH Deadline: 12 days
Good day ! I will perform the reconstruction project. Certified architect, 10 years of experience.Get all agree, I consider all the wishes!
Budget: 25000 UAH Deadline: 14 days
Good day, I suggest to develop such a set of clothes:
The Demonstration:
- Fixation of the condition and position of the design of the cover;
- the task of dismantling the vents;
- Cut the existing structure with instructions for dismantling.
The installation:
The 2nd floor (the garage and the main part)
The 2nd floor mark;
The 2nd floor;
1 and 2 floors (monolithic)
The cover plan
- Characteristic cuts (1-2 st)
- Details and nodes (ventships, PVC membrane installation)
Facade (complex solution) is a solution.
You will get the correct project, with specifications to monolithic works, with the ability to optimize the cost of materials for the performance of the works. I have experience in projecting both private housing and multiple apartment complexes, I can show examples of work when communicating.
If you fit my proposed job option, please contact me, I will be glad to help.
Budget: 10000 UAH Deadline: 24 days
Good Morning Sergey!
I am an architect, I have experience in design in the framework of the reconstruction. There are specialists on all related sections, certificates. I will carry out the project according to TZ and DBN. A specialist’s visit to the site. Write, we will discuss all the details.
My work is Behance
Budget: 20000 UAH Deadline: 14 days
Hello to you! The cost includes development
New iron concrete coverings with the specification of materials, the architectural part in the composition: facades, cuts, nodes of the roof.
Budget: 9000 UAH Deadline: 20 days
Good day .Ready to take your job.Several times it was necessary to develop the design of the cover.The payment of an advance in the size of half the value and the composition of a technical task is binding.He indicated the cost of performing such crossing for a house that has an area of construction oriented 180 m.I see such a set of cracks:
Plan of existing coverage.2nd plan of the plan.3, 4. two general cuts by the house from the middle of the walls of the floor above which the exploited roof-precity is installed to the highest designed structure of the house.Cut in the places indicated by you or on my opinion with the indication of the places where it will be necessary to dismantle/submarine the parapets and recorded by the volume of the dismantled/submarine plaque.It will be indicated the directions and corners of the roof and the place of installation of the upcoming wheels.The processing of the nodes of moisturizing bricks is not included in the indicated cost.The design of the cover of the exploited roof will be based on the structures provided by you - you will provide the structure or structures on which you wanted to furnish the exploited roof and on the basis of the structures provided the exploited roof will be developed - it will be 1- 2 cuts of the structure of the exploited roof - sheet 5, and the plan of monolithic coverings and arming plan, the arming scheme and the knowledge of materials - sheet 6.Archbishop 7.Conceptual visualization of the designed roof - so that you, the investor and the builders understand what the outlook of the roof will be and so that the builders do not have questions about how to do it.If you see the list of screws to others then I am ready to listen to you.I wish you success, call me.
Budget: 15000 UAH Deadline: 15 days
Good Morning, Sergey
I am an architect with more than 15 years of experience. I work with the designers and other co-workers. I can perform your project quickly and efficiently, but I have a note to the task:
The task is not clear and difficult to determine the volume of the work;
- Subvent, please, plan and indicate the area of the cover.
We can discuss the project in more detail in the subsequent post. I can also visualize the project if necessary.
Some of my works can be seen at Behance.
As long as the price and deadlines are available to clarify the task.
With respect, Oleg.
Доброго дня. Завдання не чітке і тяжко визначити об'єм роботи. Підвантажте, будь ласка, плани та вкажіть площу покрівлі. З повагою.
A project for a stove is needed, with a layout for two floors. On the first floor, a solid fuel stove for large firewood, one meter long. On the second floor, either a stove or a fireplace with gas channels for heating the second floor. Between the floors, there is a reinforced concrete slab, hollow. Above the second floor, there is an attic. On the second floor, the stove should be plastered, while on the first floor, it can be without plaster. Dimensions First floor Height 2200 mm from the floor to the slab Maximum width 1150 mm Length is not limited Second floor Opening in the wall 2100*2300 (height) Width up to 1200, the smaller the better. I am open to any options! The first floor is a basement. The area of the house is 120 m². The stove on the first floor is designed to heat a buffer tank of 600 liters for the underfloor heating on the second floor. The stove on the second floor serves as additional heating during the off-season, provided there is a fuel chamber. In the case of a stove, it serves as additional heating for adjacent rooms.
Vectorization (digitization) of the paper reconstruction project (115 sq.m) and registration in the EDESSB Task description: I am looking for a certified design engineer (or architect) with a valid qualification certificate and experience in the EDESSB office for digitizing and entering the completed reconstruction project into the system. Initial data of the object: Object type: separation of part of the premises of the former dormitory into a separate residential apartment. Area: 115 sq. m. Documentation status: there is an old, fully approved paper project (construction intentions) developed by a municipal architectural planning enterprise. The project has not been uploaded to the EDESSB system before (has not been digitized). Legal basis: there is an official and valid decision of the executive committee of the city council granting permission for reconstruction, the object has already been officially assigned an apartment number (address). Communications: all old paper approvals from the Fire Service, Sanitary Inspection, and City Gas (Gorgaz) are available. All networks are physically connected, metering devices are installed, and supply contracts are active. What specifically needs to be done (Scope of work): Vectorization (digitization): Redraw architectural and planning solutions from the paper archive into electronic form (PDF/DWG formats) according to current standards for graphic material design. Formation of the case in EDESSB: Create a project card in EDESSB and legally correctly attach the existing initial data: the executive committee's decision and old paper approvals from the services. Entry without new TU/MUO: Since the networks are existing and the re-planning occurs within the capital walls, the project is uploaded based on the CMU Resolution No. 406 (without issuing new TU and MUO). It is necessary to correctly fill in the declarative fields in the system to avoid blocks. Registration: Sign the project with your electronic signature and generate a registration number for the project with a QR code for the client for further submission of the Notification of the start of construction works in "Diia". Requirements for the performer: Availability of a valid certificate (I will check in the Register of certified persons). Successful experience in "processing" similar archival objects/reconstructions through EDESSB without new TU. CRITICALLY IMPORTANT CONDITION (REGARDING THE ENTRY METHODOLOGY): Please do not offer to develop a new project from scratch under modern standards at the full commercial design rate. The object has 100% ready, approved solutions in the capital walls. The task is specifically about updating the information of the old project (Stage P) through vectorization (according to the Procedure for maintaining EDESSB). Please base the work on official algorithms for entering "old" architectural solutions into EDESSB, which are currently widely discussed at professional workshops (for example, methods for supporting and digitizing archives from CLC PRO Group / PRO InfoBud). PRO InfoBud / Consultations / Commissioning / How to update information in EDESSB: guide for "old" permits. https://proinfobud.ua/yedessb/aktualizatsiya-vidomostey-yedessb-stari-proekty/ A vectorized plan is uploaded to the system, and the current decision of the executive committee and the paper letter from 2006 with wet seals from the city architect, the Ministry of Emergency Situations, and Gorgaz are attached as legal initial permit grounds. The program will not require new TU and MUO, as the project card indicates the absence of the need for new connections. A specialist is needed who clearly knows this technical toolkit of the EDESSB office. clcgroup.com.uaWorkshop “Entry and updating of “old projects” in EDESSB”https://clcgroup.com.ua/blog/aktualizatsiya-vidomostej-v-yedessb-shhodo-starih-proektiv/ Please indicate in your bids the final cost for the entire turnkey work (including uploading to the system) and realistic deadlines for completion. It is necessary to digitize the ready solution; there is no need to invent architecture or construction from scratch.
Wooden terrace 7x4.5m with a frame wooden sauna 3.5x2.25m and a tub. The terrace is located on a plot with a slight slope. It is necessary to calculate the structure of the terrace (made of wood; the site is in the mountains - high snow load), calculate the structure of the sauna, develop a 3D model (photorealistic renders are not needed) and prepare drawings (facades, sections, site plan). A small complication: the documentation and drawings must comply with a specific format. Nothing special, but markings, colors of materials, and other details must adhere to a certain format. I will provide samples. In the attached files, there is an unfinished model for a general understanding of the concept.
A technical or design project is needed to start the renovation of a residential building with an area of 69m2. The layout will be attached below.
It is necessary to make notes in AutoCAD on the completed project, as well as to add a table to the project based on the completed work reports.