Budget: 200 UAH Deadline: 4 days
Take for the project! The cost of 1 picture is 60 UAH. I will respect all your wishes.
- Projects -
- Rating -
- Rating 239
Budget: 200 USD Deadline: 4 days
Good day !
Our team will help you to solve your task professionally.
Trust the professionals and your time will work for you!
Examples of our works: ovo.ua/works
Our project: ovobox.com
Website: ovo.ua
with respect,
by Constantine Sokolov
Project Manager
The OVO Studio
in Ukraine,
Mr. Kiev and ul. Starokievskaya 10-G, BC “Vector”.
Telephone number: +38 (63) 578 15 70
Skype: Constantin_ovo.ua
Email: [email protected]
by: https://vk.com/sale_ovo_ua
Budget: 350 UAH Deadline: 14 days
Hello, you are ready to complete your project.
Experience with a schedule of more than 6 years.
Please make it quality and original.
3000 UAH for 20 paintings.
The price and deadlines can be discussed.
Budget: 400 UAH Deadline: 3 days
+
Darya Guseva
Winning proposal- Projects -
- Rating -
- Rating 334
Budget: 200 UAH Deadline: 3 days
I can write, before doing the work, to describe how I see the implementation for the opr topic.
The average price for a piece of 50-150 UAH, all depends on the complexity of performance
- Projects -
- Rating -
- Rating 126
Budget: 200 UAH Deadline: 2 days
I do it quickly and quality! I get as much as possible on order!
Budget: 350 UAH Deadline: 4 days
Ready to take your order. My portfolio is: Freelancehunt
Budget: 10 USD Deadline: 3 days
Hello to you!
$5 to $10 for 1 painting (par)
My work:
HTTP:// Freelancehunt
HTTP://stelladeig.wix.com/ms-d
by [email protected]
by: rekstell
ICQ: 622752182
- Projects 6
- Rating -
- Rating 414
Budget: 10 USD Deadline: 1 day
I do it quickly, efficiently and efficiently.
- Projects -
- Rating -
- Rating 298
Budget: 10 USD Deadline: 3 days
Good day ! Ready to cooperate with you! My portfolio is Freelancehunt
- Projects -
- Rating -
- Rating 569
Budget: 350 UAH Deadline: 1 day
Hi, I can create interesting drawings for children's stuff, cute beasts, toys, etc. Portfolio http://illustrators.ru/users/id78265. Post for contact [email protected]
Proposals concealed
Proposals are currently absent
-
Mariya Filkina 26 October 2015А 350 гривен - это за всё? За картинки оригинальные от 20 шт, за шрифты оригинальные, тоже много штук и за авторские права?
-
Alena Ivanova
26 October 2015
Мария, спасибо за вопрос. Поскольку я не ориентируюсь в ценах, я сделала примечание "Выслушаю Ваши ценовые предложения".
-
Alena Ivanova
26 October 2015
Мария, спасибо за вопрос. Поскольку я не ориентируюсь в ценах, я сделала примечание "Выслушаю Ваши ценовые предложения".
-
Mariya Filkina 26 October 2015Алёна, по сути со всеми этими запросами столько будет стоить одна картинка, шрифт - дороже.
-
Irina Yesina 26 October 2015Здравствуйте, занимаюсь машинной вышивкой - могу по рисункам сделать программы для вышивальной машины в любом удобном для вас формате. Контактные данные в моем профиле. https://freelancehunt.com/freelancer/Kaya.html#por...
Current freelance projects in the category 3D Modeling
Task: It is necessary to develop an accurate 3D model (in STL format) of a two-component box for storing bank coin rolls. The box consists of a bottom part (base with cells) and a deep top lid. Main requirements: Configuration: A box with a square grid of cells 5x5 (a total of 25 rolls). The appearance is similar to the attached photo example but recalculated for 25 slots. Box dimensions: The overall external dimensions of the closed box must be strictly 160 x 172 x 72 mm. Cell sizes and ergonomics: The model is designed for rolls with dimensions: diameter — 24 mm, height — 62 mm. The diameter of the cells should include a technological clearance (approximately +0.5 mm) so that the rolls fit freely. Important: The depth of the cells in the lower block must be such that the inserted roll protrudes from the bottom of the box upwards by 15–16 mm (i.e., the depth of the cells is about 46–47 mm). The top lid must be deep enough inside to completely cover this protruding part of the rolls when the box is closed. Construction and hinges (for STL): Rounded external vertical corners of the box (as in the photo). Integrated hinges on the back wall with a through coaxial hole diameter 3 mm for assembling the halves of the box using an M3 screw or pin are needed. No fastenings or recesses for a latch on the front wall are needed — the front panel should be solid and flat. The texture of roughness is NOT needed. In your responses, please indicate the final cost for the work and estimated completion time. I need two finished STL files (base and lid) as a result. Thank you! Note: The attached photos are taken from an open advertisement as a visual example (reference) of the design. I do not need an exact copy of someone else's product — it is necessary to develop an individual model from scratch strictly according to my dimensions (for 25 cells) and without fastenings for a lock.
Looking for a 3D visualizer to create interior visualizations for a townhouse with an area of 72 m². The visualizations need to be made according to the already prepared planning solutions, technical drawings, and references. The main task is to qualitatively convey the future interior, atmosphere, materials, colors, furniture, and lighting in accordance with the approved concept. What will be provided for work: planning solutions; technical drawings; style references, furniture, materials, and atmosphere; client wishes. Expected result: photorealistic interior visualizations; careful work with details, materials, and lighting; compliance with the provided drawings and references; ability to make adjustments within the agreed scope. Deadline - up to 10 days. Experience with residential interiors, particularly apartments, houses, or townhouses, is preferred. Please send examples of similar work in your response.
A 3D character model is needed based on the reference for a game in Unity. Ideally with a cool rig. I don't know how to make it so that it looks angular without rendering. I'm open to any suggestions or ideas.
A 3D model of a pocket mirror needs to be created for CNC production from wood. Please contact with proposals. Thank you.
A person is needed who can work with 3D animation. Task: recreate a 3D image on a face of a similar nature and then overlay this on "Before" and "After," as a result of transformation after the procedure. Important: to do it manually (NOT AI), own idea and interpretation.