Price, quality, professionalism and mat. Partly, the speed of implementation of the routes is unacceptable for many heights.
I will be dealing in the future.
Budget: 500 UAH Deadline: 1 day
Good time for the day! I specified the price for the service by 100 grams higher as I can deal with the tasks of this kind in one day!
HTTP://taryeld.wix.com/render
Here is a link to the work site! And there are contacts! I work at home and without time limits.I am interested in developing cooperation.Tell me to write I am pleased with cooperation!
Budget: 400 UAH Deadline: 1 day
Ready
Budget: 400 UAH Deadline: 2 days
I will do the model without any problems. I do render quality. to communicate. portfolio of my works http://fishup.ru/albums/slideshow/fullscreen/p/m/2/gid/1678561/
My email is [email protected]
My skype aleksiy4598
Budget: 20 USD Deadline: 2 days
Hello to you. I will be happy to cooperate.
Here is a partial portfolio.
HTTP://lockige.org.ua
Write to [email protected]
With respect, Xenia
Budget: 300 UAH Deadline: 1 day
I am glad to take on your project. Ready for long-term cooperation.
Budget: 350 UAH Deadline: 2 days
Hi, you are a Veacheslav.
Ready to fulfill your order in accordance with your wishes.
Budget: 400 UAH Deadline: 2 days
Call me to do. We have a great experience in performing such orders.
Budget: 400 UAH Deadline: 1 day
Good morning, ready to do it.
Portfolio: Freelancehunt
Budget: 400 UAH Deadline: 2 days
Ready to perform. Experience and responsibility. I will be happy to have constant cooperation. Communications at work time.
Budget: 20 USD Deadline: 1 day
+
Budget: 400 RUB Deadline: 1 day
Welcome to Vyacheslav,
Ready to fulfill your order.
There is experience in modeling and visualizing the closets and visualizing them in the interior.
constantly in contact.
Category: Drinkerdp
portfolio: https://freelancehunt.com/my/portfolio
Budget: 200 UAH Deadline: 2 days
I’m ready to do my job because I have all the skills to work with 3D modeling! I work in Sketch-Up, I can do the work in a couple of days, if I try, then in one day.
Budget: 400 UAH Deadline: 2 days
Hello to you. I satisfy your conditions. There is experience in furniture design.Look out the work in the portfolio.
I’m working on 3ds max. Originals in any formats and quality for you.
Examples of execution 1-2 days.
Please contact me.
Skype: remnev.denis
Mail: [email protected]
Budget: 400 UAH Deadline: 1 day
Good night ! I will be happy to help, call me.
HTTPS://freelancehunt.com/my/portfolio
Budget: 400 USD Deadline: 1 day
Execution period from 2 hours to 1 day.The price is 400 UAH. But it is without correction the more you wrote them will be a lot. There are questions on TZ because not all sizes are indicated, etc. If you are interested, we will discuss everything. Not one time worked not averagely with such orders.
Budget: 400 UAH Deadline: 2 days
Ready to cooperate on a permanent basis. I’m going to be in contact all day, as the freelancer is my main robot. I agree with your price and deadlines. Examples will be shown in LS.
Budget: 400 UAH Deadline: 2 days
Ready to perform.
One day in this closet.
Budget: 400 UAH Deadline: 2 days
a good day.
I will be happy to cooperate. 8 years of work experience.
Examples of my work can be seen in the portfolio.
The price is satisfied.
Duration of 1 to 2 days.
Let’s write and discuss details.
Budget: 400 UAH Deadline: 2 days
Hi, I will do it.
Budget: 400 UAH Deadline: 1 day
Ready to try
Budget: 1000 UAH Deadline: 3 days
Good evening .
3ds Max + V-ray
Budget: 1000 UAH Deadline: 3 days
Prices and deadlines can be adjusted.
If work on long-term cooperation, then I can offer some drawings of the development of parametric models of furniture, allowing the basic sizes to get the finished model quickly enough, and already by it - both rendering and if necessary - a set of drawings for manufacture.
About the corrections - it depends on the complexity ... but the more work will be, the faster it will be possible to offer the customer a visualization ...
Стремление снизить затраты своего "бизнеса" похвальны.
Порекомендую в таком случае освоить и выполнять подобные работы самостоятельно. Затраты "бизнеса" снижает однозначно.
Рекомендую фрилансерам обратить внимание на предыдущие проекты заказчика и такие факты:
1) в каждом проекта с мая заказчик ищет исполнителя "на постоянной основе";
2) заказчик очень хорошо разбирается в работе САПР, знает как быстро там делаются чертежи, и поэтому ставит низкие бюджеты;
3) заказчик "никаких денег до готовности" не отправляет. гарантии оплаты - не понятны, особенно с учетом такой частой смены исполнителей.
4) проявляет элементарное неуважение, не давая ответа после запроса и получения дополнительних материалов к предложению фрилансера.
Последний пункт, к сожалению, осносится к основной массе заказчиков. Даже при 30-40+ откликов на проект составить одно предложение и разослать его не составляет труда. Зато фрилансер понимает, что он дает предложение не в "пустоту". Правила хорошего тона еще никто не отменял.
Ivan O. Очень похоже на заказуху, или личную обиду. Может тебе дать профили фрилансеров, с которыми я здесь работал? Спросишь напрямую конкретные прямые вопросы. Не? А ты подумай... Я мигом предоставлю.
А ещё пойми, что есть в мебельной сфере такая хрень, когда тупо нет заказов. Вот нет их, хоть убей. Работа делается под конкретный заказ, есть заказы - есть работа. А ещё бывает, когда исполнитель делал делал и хорошо делал.. а потом бац - отвлекся на проект крупный и не взял, один, второй, третий заказ. Ты предлагаешь ждать манны небесной? Плохая идея, дело нужно делать и ищется другой исполнитель. К сожалению не получается так, что один человек делает регулярно всё. Вот если сейчас будет 10 заказов на мебель на 13-14 позиций, тут и двое не справятся, нужен будет кто то ещё.
Никаких денег? У тебя есть факты? Факты есть? Всегда всё оплачивалось 100%нтно. А дать тебе профили с кем я тут работал? Ты только попроси, я мигом. Как минимум 2-х человек отсюда. Спросишь ещё сколько я им проектов дал, только сам лично, ок? Жду ответа. Да, было пару исполнителей с вариантом "Давай я сделаю, не понравится - без вопросов". Но в основном все справлялись хорошо.
Я ни разу не спец в САПР, просто естьмне сделали достаточно, что бы понимать сколько времени занимает та илои иная работа. Ах да, откуда мне это знать, ведь я же даю 2-3 проекта за год...
Пункт 4 - тут нечего комментировать.
Ну и если всё так ужасно, в проекте откликнулось немало человек. А здесь нопесал только ты и ещё один человек.
Я не знаю как тут запретить комметирование. Есть задача - есть бюджет. Не подходит - так пойди мимо, чё тут сопли раздувать..
Прежде всего мы с Вами на "ты" не переходили, соблюдайте нормы приличия хоть в этом.
По порядку:
1) ни заказухи на личной обиды нет; ставка на проект - это потраченное время, переписка - это потраченное время. Давайте уважать время друг друга и давать обратную связь. Это очень просто.
2) я прекрасно знаю про такую "хрень" - она есть не только в мебельной сфере, но и в металлоконструкциях и т.д.
3) фрилансер не откажется от заказов постоянного клиента если они уже наладили сотрудничество - практически всегда можно выделить время даже при работе над крупным заказом, но то они постоянные заказчики. Поэтому прекращение работы с постоянным клиентом крайне редко может быть связано с крупным проектом. Отсюда и напрашивается вывод что в сотрудничестве не все гладко. А судя по количеству приглашения постоянных исполнителей вероятность правильности этого вывода стоновиться еще больше.
4) "никаких денег". Факт: https://freelancehunt.com/project/vizualizatsiya-2-h-izdeliy-solidworks-pluschertyozh/87315.html В описании проекта четко указано что оплата только по завершению проекта: "Никаких денег до готовности не отправляю". Причем сделано это в довольно резкой форме, как, в прочем, освещены и другие аспекты сотрудничества с Вами. Именно из-за этого ставка не была сделана тогда и отзвана сейчас, даже не смотря на желание поработать с Вами по этому проекту. Иногда полезно посмотреть предыдущие проекты заказчиков.
5) "всегда все оплачивалось 100%". Практика показывает что нежелание авансировать работы, а тем более в сочетании с резкой манерой общения свидетельствуют о крайне высокой вероятности проблем с оплатой. Очень хочется верить что это не Ваш случай. Да я Вас в этом и не обвинял - мы ведь не работали.
6) Знаете сколько делается работа в солиде - хорошо, это Ваш плюс в отфильтровке "прожорливых" исполнителей. Но специалист от неспециалиста отличается более глубокими знаниями, за что он и назначает свою цену даже на "простые" проекты. Скорость работы специалиста - его заслуга и преимущество а не повод платить поменьше.
7) по пункту 4 коментировать и не нужно - действительно нечего. В статистике учтите также количество жалоб на низкий бюджет и количество ставок на проект по ссылке выше (жаль нет возможности посмотреть на время публикации и разброс времени ставок, но тот проект, насколько помню, был зарыт не сразу).
Коментарии в проектах, насколько мне известно, на этой бирже отключить нельзя. Это нормально, когда кто-то обращает внимание на возможные нестыковки и обращает на них внимание коллег. Имеете возможность и аргументы их прояснить - сделайте это. Желательно вежливо, без "соплей" и фамильярности.
Знать себе цену: какую зарплату стоит называть на собеседовании, чтобы получить работу
Ведь компании покупают не ваши финансовые ожидания, а опыт и умения. У работодателя есть свой бизнес-процесс, на который он готов потратить определенные средства.
Не можете себе нанять хорошего специалиста за адекватную цену - ну что же, желающие всегда найдутся сделать более дорогостоящую работу за кусок хлеба. Этот вариант тоже проходился...
Только вряд ли нужно надеяться на долгосрочное сотрудничество в таком случае....
The goal is to develop the first model of our own series of collectible 3D-printed toy cars in the "kit card" format (car + separate sprue frame with wheels, like in plastic model kits). The series is being created for gift merchandise.
There is a ready-made plate (the base of the keychain) and a logo that needs to be applied to this plate so that the letters are raised and clear when printed with a 0.4 mm nozzle.
We are looking for a specialist who professionally engages in optimizing high-polygon car models for GTA V. Our main task is to obtain models that combine maximum performance with the highest possible visual quality. If you can find this balance, we would be happy to establish a long-term collaboration. Main Responsibilities Performing retopology of car models. Optimizing the polygon mesh to an optimal number of triangles without noticeable loss of quality. Re-baking textures (Normal, AO, Curvature, and others) after optimization. Preserving proportions, geometry, and all key details of the car. Optimizing textures, materials, and model structure according to the requirements of GTA V. Creating LOD levels. Preparing collisions. Preparing the model fully ready for integration into GTA V. Our Expectations Practical experience in retopology and optimization of 3D car models. Proficient use of Blender or other professional 3D packages. Experience with baking PBR textures. Understanding the principles of model optimization for real-time games. Experience preparing vehicles specifically for GTA V will be a significant advantage. Understanding the specifics of LOD, collisions, materials, textures, and the limitations of the GTA V engine. Ability to work quickly without sacrificing quality. What We Provide Source car models. Constant workflow. Long-term collaboration. Competitive payment depending on the complexity of the model and quality of execution. Important For us, quality and speed are equally important. The final result must be maximally optimized for GTA V, have clean topology, optimized textures, correctly configured materials, while preserving the appearance of both the exterior and interior of the car as much as possible. We are looking for a specialist who can regularly prepare high-quality models without the need for additional revisions after submission. Please propose a cost per car and indicate the time frame in which you can complete the work.
A case for the printed circuit board needs to be made, optimized for 3D printing (I mean to consider shrinkage, I will be printing with PETG plastic). The case should consist of 2 parts and be screwed together with M3 screws (with a place for a nut on the other side). Photos of the actual board and the step file are attached in the announcement. The only difference between the model and the board is the LEDs; they have a diameter of 5mm and are soldered in such a way that the center of the LED lens is aligned with the center of the button. USB_CAN_SD_F103.step.png - this is the step file, the .png needs to be removed from the name (otherwise it cannot be added to the announcement). I expect an assembly from the attached step file and the case with 2 parts - so that the functionality can be checked without printing.
Welcome! The company Adaptis needs to update graphic materials for A+ content on our website and on Amazon. We already have a fully prepared design for A+ content (cards, banners, infographics), but they depict a different shape of our product. We have changed the product design and now have its new 3D model. The main task is to create realistic renders of the new product shape and carefully "fit" them into the existing banners instead of the old shape. And immediately your cases