Budget: 6000 UAH Deadline: 5 days
Good day. I will prepare a Sketch of the construction intentions until a positive result is obtained in the CNAP. Feel free to contact me.
It is necessary to develop a Construction Intent Sketch to obtain a building passport for a private house, approximately 240m2.
What is included in the task (approximate composition):
Data I provide:
Requirements for the performer:
Budget: 6000 UAH Deadline: 5 days
Good day. I will prepare a Sketch of the construction intentions until a positive result is obtained in the CNAP. Feel free to contact me.
Budget: 27000 UAH Deadline: 14 days
Hello! My name is Bohdana, I am an architect with 5 years of experience, specifically I have experience in creating Intent Sketches for construction, I can send an example in the message. The estimated price will be $5-10 per square meter.
Budget: 8000 UAH Deadline: 7 days
Good day, I will execute the ENZ with plans and explanations, a development intention scheme, facades, a roof plan, and 3D views if needed. I have previously completed Sketch Design Intent for development and can provide several such albums. I will provide a drawing album in PDF format and the ArchiCad source file.
Budget: 12000 UAH Deadline: 7 days
Good day. My name is Oleksandr, I am a certified design engineer, a top performer in the field of design and architecture on this site, with a large portfolio and over 12 years of experience. I specialize specifically in your issue. I have 1100+ construction passports registered directly by me. I can immediately register the development intention scheme, so there is no need to contact local authorities for the registration of the construction passport. I work quickly and efficiently. I am ready for dialogue.
Budget: 8000 UAH Deadline: 5 days
Good morning. I will complete the task quickly and efficiently, taking your wishes into account. I am a professional architect.
Budget: 8000 UAH Deadline: 7 days
Hello! Thank you for the brief technical assignment! The cost of the sketch project for over 150 m2 is 8,000 UAH. This includes: plans with TEP, sections, facades, visualizations of the house (according to your wishes), and a site development scheme (if needed). Payment can be made in stages! The deadline for the documentation will be agreed upon separately after clarifying the project details, but not earlier than 7 working days. As an example of my documentation work, I can send it privately so you can understand the level of documentation quality. Thank you for your attention!
Budget: 8000 UAH Deadline: 5 days
Hello. I will professionally complete the task and take your wishes into account. Feel free to contact me!!!
Budget: 7000 UAH Deadline: 3 days
Good day. I will develop the necessary Sketch of the construction intentions for you. I have extensive experience in this work. I will show samples. The exact price and timeline will be discussed.
Budget: 27000 UAH Deadline: 40 days
Greetings, example of work - Google Drive The cost of designing a house - from $10/sq.m. of the total area of the house premises for one architectural solution, the list of drawings - site plan, floor plans, roof plan, facades, sections. Deadline - from 40 days. Partial advance payment. The final list of drawings, time, and price after agreement.
Budget: 5000 UAH Deadline: 5 days
Hello.
I will do the work quickly and efficiently.
Extensive practical experience.
I am engaged in architectural and construction projects, developing concepts of varying complexity, 3D modeling, 3D visualization, 3D video animation, project presentations, interior and exterior design, video editing, as well as product design, and developing furniture prototypes (designed and manufactured for an exhibition in Canada, then launched into mass production), industrial design for mass production (a street lamp designed was installed in large quantities in various cities in different countries), and product listing. Excellent knowledge of ergonomics and regulatory framework in the field of construction design. Extensive practical experience. Creative approach to work. I work in 3ds Max+V-Ray+Corona, SketchUp+V-Ray, AutoCAD, Revit, Photoshop, Lumion, After Effects. My portfolio https://3ddomkiev.wixsite.com/website-2
Budget: 6000 UAH Deadline: 5 days
Good day!
I will prepare a sketch of the construction intentions to obtain a building passport for a house with an area of about 240 m². I will prepare a site development plan with the necessary setbacks, floor plans, facades with height marks, and a roof plan.
I have experience in preparing similar documentation for submission to architecture and the Administrative Services Center. In case of receiving comments, I am ready to promptly make the necessary adjustments.
You will receive a complete set in PDF for submission and the source files in DWG/ArchiCAD. For the work, the provided initial data is sufficient: photos of the old building passport, dimensions, layout, and photographs of the existing building.
I am ready to start immediately after receiving the materials.
A project for a stove is needed, with a layout for two floors. On the first floor, a solid fuel stove for large firewood, one meter long. On the second floor, either a stove or a fireplace with gas channels for heating the second floor. Between the floors, there is a reinforced concrete slab, hollow. Above the second floor, there is an attic. On the second floor, the stove should be plastered, while on the first floor, it can be without plaster. Dimensions First floor Height 2200 mm from the floor to the slab Maximum width 1150 mm Length is not limited Second floor Opening in the wall 2100*2300 (height) Width up to 1200, the smaller the better. I am open to any options! The first floor is a basement. The area of the house is 120 m². The stove on the first floor is designed to heat a buffer tank of 600 liters for the underfloor heating on the second floor. The stove on the second floor serves as additional heating during the off-season, provided there is a fuel chamber. In the case of a stove, it serves as additional heating for adjacent rooms.
Vectorization (digitization) of the paper reconstruction project (115 sq.m) and registration in the EDESSB Task description: I am looking for a certified design engineer (or architect) with a valid qualification certificate and experience in the EDESSB office for digitizing and entering the completed reconstruction project into the system. Initial data of the object: Object type: separation of part of the premises of the former dormitory into a separate residential apartment. Area: 115 sq. m. Documentation status: there is an old, fully approved paper project (construction intentions) developed by a municipal architectural planning enterprise. The project has not been uploaded to the EDESSB system before (has not been digitized). Legal basis: there is an official and valid decision of the executive committee of the city council granting permission for reconstruction, the object has already been officially assigned an apartment number (address). Communications: all old paper approvals from the Fire Service, Sanitary Inspection, and City Gas (Gorgaz) are available. All networks are physically connected, metering devices are installed, and supply contracts are active. What specifically needs to be done (Scope of work): Vectorization (digitization): Redraw architectural and planning solutions from the paper archive into electronic form (PDF/DWG formats) according to current standards for graphic material design. Formation of the case in EDESSB: Create a project card in EDESSB and legally correctly attach the existing initial data: the executive committee's decision and old paper approvals from the services. Entry without new TU/MUO: Since the networks are existing and the re-planning occurs within the capital walls, the project is uploaded based on the CMU Resolution No. 406 (without issuing new TU and MUO). It is necessary to correctly fill in the declarative fields in the system to avoid blocks. Registration: Sign the project with your electronic signature and generate a registration number for the project with a QR code for the client for further submission of the Notification of the start of construction works in "Diia". Requirements for the performer: Availability of a valid certificate (I will check in the Register of certified persons). Successful experience in "processing" similar archival objects/reconstructions through EDESSB without new TU. CRITICALLY IMPORTANT CONDITION (REGARDING THE ENTRY METHODOLOGY): Please do not offer to develop a new project from scratch under modern standards at the full commercial design rate. The object has 100% ready, approved solutions in the capital walls. The task is specifically about updating the information of the old project (Stage P) through vectorization (according to the Procedure for maintaining EDESSB). Please base the work on official algorithms for entering "old" architectural solutions into EDESSB, which are currently widely discussed at professional workshops (for example, methods for supporting and digitizing archives from CLC PRO Group / PRO InfoBud). PRO InfoBud / Consultations / Commissioning / How to update information in EDESSB: guide for "old" permits. https://proinfobud.ua/yedessb/aktualizatsiya-vidomostey-yedessb-stari-proekty/ A vectorized plan is uploaded to the system, and the current decision of the executive committee and the paper letter from 2006 with wet seals from the city architect, the Ministry of Emergency Situations, and Gorgaz are attached as legal initial permit grounds. The program will not require new TU and MUO, as the project card indicates the absence of the need for new connections. A specialist is needed who clearly knows this technical toolkit of the EDESSB office. clcgroup.com.uaWorkshop “Entry and updating of “old projects” in EDESSB”https://clcgroup.com.ua/blog/aktualizatsiya-vidomostej-v-yedessb-shhodo-starih-proektiv/ Please indicate in your bids the final cost for the entire turnkey work (including uploading to the system) and realistic deadlines for completion. It is necessary to digitize the ready solution; there is no need to invent architecture or construction from scratch.
Wooden terrace 7x4.5m with a frame wooden sauna 3.5x2.25m and a tub. The terrace is located on a plot with a slight slope. It is necessary to calculate the structure of the terrace (made of wood; the site is in the mountains - high snow load), calculate the structure of the sauna, develop a 3D model (photorealistic renders are not needed) and prepare drawings (facades, sections, site plan). A small complication: the documentation and drawings must comply with a specific format. Nothing special, but markings, colors of materials, and other details must adhere to a certain format. I will provide samples. In the attached files, there is an unfinished model for a general understanding of the concept.
A technical or design project is needed to start the renovation of a residential building with an area of 69m2. The layout will be attached below.
It is necessary to make notes in AutoCAD on the completed project, as well as to add a table to the project based on the completed work reports.