Technical design of furniture
We are looking for a designer to develop a technical design of a closet room on the Eureka system. It is also possible to cooperate on a permanent basis.
You will receive a clear TZ from the manager with the visualization, sizes, photos of the room and the wishes of the customer.
Set of Requirements:
Screenshots of Products
Scheme of composition
Specification of details
Specification of Furniture
Files of ViyarPro
Applications 1
-
1 day18 USD
416 1 0 1 day18 USD
Good day .
Ready for cooperation.
I perform the model and drawing in Autodesk Inventor + Woodwork.
Territoryally in Crimea.
Cost and deadlines after receipt of detailed TZ.
Current freelance projects in the category Drawings & Diagrams
Development of KMD based on the completed projectAccording to the completed project for the separation of floors, it is necessary to develop detailed drawings in KMD for manufacturing at the factory. The project is available in PDF and DWG. Object Design, Drawings & Diagrams ∙ 7 hours 56 minutes back ∙ 4 proposals |
Develop metal structures for roofs on entrance groups
67 USD
It is necessary to develop metal frames for roofs over entrance groups (entrance group 1 - roof over the gate, entrance group 2 - roof over the gate with a door), specifically: supports for the roof metal structure, the metal structure of the roof itself, materials, fastening… Drawings & Diagrams ∙ 1 day 1 hour back ∙ 6 proposals |
Sheet metal cabinet 0.8 mm
22 USD
Design of a Metal Locker CabinetGeneral Information It is necessary to develop a complete set of drawings and a 3D model of the locker cabinet for further production from sheet metal.Dimensions of the Product Height — 2100 mm. Width — 600 mm. Depth — 485 mm.Construction Two… Engineering, Drawings & Diagrams ∙ 1 day 3 hours back ∙ 10 proposals |
Create a layout for a detailed paper architectural model based on the sketch project.I'm looking for a specialist who can prepare a high-quality and very detailed layout for creating a physical model from paper/cardboard. There are source materials for the project: — facades; — sections; — visualizations; — sketch architectural project; — file in .pln format; —… Drawings & Diagrams ∙ 1 day 20 hours back ∙ 2 proposals |
Point cloud to Revit (A3852)
For a future architectural project, it is necessary to model a building and the land with roads and stairs from a point cloud. Develop a 2D drawing with the main dimensions, total and living areas of the premises. Output data can be found at the link:… Architectural Design, Drawings & Diagrams ∙ 2 days 1 hour back ∙ 3 proposals |
Kremenchug