Budget: 10000 UAH Deadline: 7 days
Hello. I propose to carry out the vertical planning of the site and the master plan scheme according to your requirements. I have extensive experience and the appropriate expertise in this field of design. I perform my work in 3D, so I can guarantee you the correspondence of the final result to reality. We will conduct an analysis of the site's relief. Based on this, we will carry out vertical planning. Additionally, as a bonus, you will receive a 3D visualization of the result. I will send examples of my work in personal correspondence. I invite you to discuss the details of your project. The cost may change in either direction according to your needs; I invite you to correspond.
Mariya Golyuk
Winning proposal- Projects 4
- Rating 5.0
- Rating 876
Budget: 13500 UAH Deadline: 17 days
Good day!
For vertical planning, it is also necessary to have a master plan or landscape zoning to coordinate everything with the elevations and slopes. Without this, it will be difficult to work with vertical planning; the work will actually be in vain. We can discuss the details, and I can develop the vertical planning if needed to calculate the earthworks. Additionally, I can also offer landscape architecture and design services.
Details in the message.
Budget: 5000 UAH Deadline: 7 days
I will complete your order. I have experience in architectural design.
Budget: 10000 UAH Deadline: 10 days
Hello, Anastasia. I offer architectural services with 20 years of experience in the field of architecture and construction for the development of landscape design and site improvement, 3D visualization, execution of drawings - General plan, vertical planning, layout drawings, planning of surface water collection systems, if necessary, underground drainage, design of paving, lighting systems, automatic irrigation systems, landscaping, development of small architectural forms, etc.
Two higher education degrees in construction and architecture, as well as extensive experience in implementing construction projects, allow for evaluating and considering all aspects of the design of the future object already at the stage of data collection.
The final cost and deadlines depend on the required composition of the project and the level of detail in the development. An example of similar work on site improvement and the project composition is provided in the Portfolio.
Portfolio: Behance
Budget: 14000 UAH Deadline: 18 days
Good day, Anastasia. I am an architect. I also live in Dnipro, so it will be convenient to work, we can make a site visit. For over 17 years, I have been engaged in turnkey design - architecture, interior design, and landscape design. In my experience, there have been many complex sites, so I will do it competently and beautifully. I will recommend contractors and finishing materials that won't cost a fortune. Examples of my work can be found here Behance. You will see quite well-known objects in Dnipro in my portfolio, so you can trust me with the design. We will clarify the price after discussion.
Budget: 14000 UAH Deadline: 20 days
Hello Anastasia, I will do the vertical planning of the site. The cost is 14 thousand hryvnias, the term is 20 days. By the way, this cost includes the delivery to the site of two trucks of soil with a volume of 10 cubic meters each, but if the vertical planning is done incorrectly, then twenty trucks will not be enough, and the volume of earthworks will be unmanageable for your wallet. The cost will include the development of a site plan with the placement of the house, a prospective utility building, the entrance and access to the site because everything I listed must be developed together, also together with the house because this is not a training project, and when designing the house, it should be (!) correctly placed on the site, taking into account everything mentioned in the site planning scheme at least approximately, currently none of this exists. But it is good that there is an opportunity to do this at least now while the house is not built.
It is important that you provide the phone number of the land surveyor who carried out the land management project for you. This is necessary so that I can obtain from him the detailed planning project of the development block, or I will need to find out from him who may have this detailed planning of the area. Because the vertical planning of the site must be done taking into account the block project so that water does not flow like a river to your site from the entire street because the architect did not take everything into account as it should be. The service prohibits sending phone numbers, so you will have to find me by name by searching for "Hnilyukh Mykola Bohdanovych Architect" and my contact details will be there. You will not be able to do this yourself because it will be difficult for you to explain to him as you do not have experience in such work. But this is only if you decide to choose me if the price suits you and you liked me. In other cases, do as you see fit. Best regards.
Budget: 3000 UAH Deadline: 14 days
Good evening. I will carry out the planning but after clarifying all the data. I will specify the list of drawings.
- Projects 3
- Rating 5.0
- Rating 1 718
Budget: 5000 UAH Deadline: 14 days
Good day, I can do vertical planning using the method of project contours. But we need to discuss the details of what exactly you need and for what purpose. Engineering preparation may be required based on the terrain.
Budget: 14000 UAH Deadline: 18 days
Good day.
I have experience with similar projects.
I can start after the discussion.
Proposals are currently absent
-
Volodimir Muravsky 30 March 2025Вітаю, для початку рекомендую оновити топооснову ділянки, враховуючи існ. відмітки проїзду в масштабі М1:500... Це краще зробити до початку розроблення проекту, бо судячи з кількосі ізоліній, посадка будинку та вертикальне планування матиме вплив на фундаменти та тераси!
Скоріше за все у Вас укрупнена М1:1000 для містобудівної документації!
Current freelance projects in the category Architectural Design
Good morning, I am a real estate agent and while acquiring land for sale, I also have plots that require absorption analysis. I am looking for an architect to prepare such analyses. The scope of the analysis is to be determined. Since the property owner covers this cost, I am looking for a service provider with competitive prices. The plots are mainly for division for single-family housing. Please feel free to contact me if you have any questions fundamentalgrunty dot pl
A project for a stove is needed, with a layout for two floors. On the first floor, a solid fuel stove for large firewood, one meter long. On the second floor, either a stove or a fireplace with gas channels for heating the second floor. Between the floors, there is a reinforced concrete slab, hollow. Above the second floor, there is an attic. On the second floor, the stove should be plastered, while on the first floor, it can be without plaster. Dimensions First floor Height 2200 mm from the floor to the slab Maximum width 1150 mm Length is not limited Second floor Opening in the wall 2100*2300 (height) Width up to 1200, the smaller the better. I am open to any options! The first floor is a basement. The area of the house is 120 m². The stove on the first floor is designed to heat a buffer tank of 600 liters for the underfloor heating on the second floor. The stove on the second floor serves as additional heating during the off-season, provided there is a fuel chamber. In the case of a stove, it serves as additional heating for adjacent rooms.
Vectorization (digitization) of the paper reconstruction project (115 sq.m) and registration in the EDESSB Task description: I am looking for a certified design engineer (or architect) with a valid qualification certificate and experience in the EDESSB office for digitizing and entering the completed reconstruction project into the system. Initial data of the object: Object type: separation of part of the premises of the former dormitory into a separate residential apartment. Area: 115 sq. m. Documentation status: there is an old, fully approved paper project (construction intentions) developed by a municipal architectural planning enterprise. The project has not been uploaded to the EDESSB system before (has not been digitized). Legal basis: there is an official and valid decision of the executive committee of the city council granting permission for reconstruction, the object has already been officially assigned an apartment number (address). Communications: all old paper approvals from the Fire Service, Sanitary Inspection, and City Gas (Gorgaz) are available. All networks are physically connected, metering devices are installed, and supply contracts are active. What specifically needs to be done (Scope of work): Vectorization (digitization): Redraw architectural and planning solutions from the paper archive into electronic form (PDF/DWG formats) according to current standards for graphic material design. Formation of the case in EDESSB: Create a project card in EDESSB and legally correctly attach the existing initial data: the executive committee's decision and old paper approvals from the services. Entry without new TU/MUO: Since the networks are existing and the re-planning occurs within the capital walls, the project is uploaded based on the CMU Resolution No. 406 (without issuing new TU and MUO). It is necessary to correctly fill in the declarative fields in the system to avoid blocks. Registration: Sign the project with your electronic signature and generate a registration number for the project with a QR code for the client for further submission of the Notification of the start of construction works in "Diia". Requirements for the performer: Availability of a valid certificate (I will check in the Register of certified persons). Successful experience in "processing" similar archival objects/reconstructions through EDESSB without new TU. CRITICALLY IMPORTANT CONDITION (REGARDING THE ENTRY METHODOLOGY): Please do not offer to develop a new project from scratch under modern standards at the full commercial design rate. The object has 100% ready, approved solutions in the capital walls. The task is specifically about updating the information of the old project (Stage P) through vectorization (according to the Procedure for maintaining EDESSB). Please base the work on official algorithms for entering "old" architectural solutions into EDESSB, which are currently widely discussed at professional workshops (for example, methods for supporting and digitizing archives from CLC PRO Group / PRO InfoBud). PRO InfoBud / Consultations / Commissioning / How to update information in EDESSB: guide for "old" permits. https://proinfobud.ua/yedessb/aktualizatsiya-vidomostey-yedessb-stari-proekty/ A vectorized plan is uploaded to the system, and the current decision of the executive committee and the paper letter from 2006 with wet seals from the city architect, the Ministry of Emergency Situations, and Gorgaz are attached as legal initial permit grounds. The program will not require new TU and MUO, as the project card indicates the absence of the need for new connections. A specialist is needed who clearly knows this technical toolkit of the EDESSB office. clcgroup.com.uaWorkshop “Entry and updating of “old projects” in EDESSB”https://clcgroup.com.ua/blog/aktualizatsiya-vidomostej-v-yedessb-shhodo-starih-proektiv/ Please indicate in your bids the final cost for the entire turnkey work (including uploading to the system) and realistic deadlines for completion. It is necessary to digitize the ready solution; there is no need to invent architecture or construction from scratch.
Wooden terrace 7x4.5m with a frame wooden sauna 3.5x2.25m and a tub. The terrace is located on a plot with a slight slope. It is necessary to calculate the structure of the terrace (made of wood; the site is in the mountains - high snow load), calculate the structure of the sauna, develop a 3D model (photorealistic renders are not needed) and prepare drawings (facades, sections, site plan). A small complication: the documentation and drawings must comply with a specific format. Nothing special, but markings, colors of materials, and other details must adhere to a certain format. I will provide samples. In the attached files, there is an unfinished model for a general understanding of the concept.
A technical or design project is needed to start the renovation of a residential building with an area of 69m2. The layout will be attached below.