Self-locking safe cassette of the self-service device
Greetings to all freelancers 🙂
I am resuming this project, as there is again a need for its implementation.
Task:
Development of a safe cassette with an automatic mechanical locking system for self-service devices, such as payment terminals, ATMs, deposit machines, etc.
Description:
The safe cassette is a metal (in our case) or plastic casing, inside which there is a semi-automatic self-locking mechanism triggered by certain actions from the cash-in transit officer. At the top of the cassette, there is a cutout for receiving cash (CC), and at the bottom, there is a bag for collecting it.
The safe cassette is designed for collecting and transporting cash by the cash-in transit service, meaning that when the cassette is in the device, it accepts cash bills, and when full, a cash-in transit officer arrives to extract the cassette from the self-service device. At the moment of extraction, the cutout through which the CC enters the bag automatically locks, preventing the cash-in transit officer from accessing the cash. The cash-in transit officer must deliver the cassette to the counting room, where it can be opened and the cash extracted, meaning the cash-in transit officer should not have access to the bag with money.
The entire workflow looks as follows:
- In the counting room, the empty safe cassette is "cocked"
- The cocked cassette is delivered to the self-service device by the cash-in transit officer
- The cash-in transit officer installs the safe cassette in the self-service device
- The device accepts a certain amount of CC until the bag is full
- Then the cash-in transit officer arrives again and extracts the safe cassette from the device
- At the moment of extraction, the cutout for receiving CC automatically locks, thereby blocking the cash-in transit officer's access to the CC
- The cash-in transit officer transports the filled cassette to the counting room
- The counting room staff uses a key to open the cassette and extract the CC
and then it all starts over
Examples of photos from third-party manufacturers:
An example of the principle of operation of the safe cassette can be seen here:
https://youtu.be/h0atpcrW7ws?si=bbmoSCPkA99asvxd&t=281 (starting from 4:41, link with timestamp)
Another visual example of the principle of operation:
https://youtu.be/wLj2s5Sxh4E
What is available:
Additional technical assignment with all dimensions and CAD files
A physical sample and CAD files of the prototype of the mechanism developed by us, which requires refinement.
There are also various physical samples of several prototypes from third-party manufacturers where some solutions can be observed
Requirements for the product:
Design of the device from sheet metal (stainless steel)
Presence of a mechanical indicator of the locking system (2 positions cocked/uncocked)
Refinement of our design or development from scratch of an automatic locking system for the cutout for receiving CC
Minimum number of turned parts, preferably their absence
Development of a stand into which the cassette is inserted during installation
Safety of the self-locking mechanism and the cocking mechanism, there should be no possibility to "hack" the cassette and gain access to the CC from outside.
All mechanisms should be mechanical, working on springs, with sensors added electronically.
Project requirements:
Design in AutoDesk Inventor or Solidworks.
Provision of project files in the formats of these CAD programs and also in STEP format.
Design with an orientation towards the availability of local manufacturers.
Deadline for the task with all approved revisions - 30 calendar days.
I am ready to consider your terms.
Приветствую всех фрилансеров 🙂
Возобновляю данный проект, так как снова появилась потребность в его реализации.
Задание:
Разработка сейф-кассеты с автоматической механической системой запирания для устройств самообслуживания, таких как: платежные терминалы, банкоматы, депозитные машины и т.д
Описание:
Сейф-кассета представляет собой металлический (в нашем случае) или пластиковый корпус, внутри которого располагается полуавтоматический механизм самозапирания при определенных действиях со стороны инкассатора. В верхней части кассеты имеется вырез для приёма денежных средств (ДС) в нижней части располагается мешок для их сбора.
Сейф-кассета предназначена для сбора и переноса денежных средств службой инкассации, то есть в момент нахождения кассеты в устройстве она принимает в себя денежные купюры, посредством заполнения приезжает сотрудник инкасационной службы и извлекает кассету из устройства самообслуживания, в момент извлечения вырез, через который ДС попадают в мешок автоматически запирается, в таком виде сотрудник инкассации должен доставить кассету до кассы пересчета, где уже её могуть открыть и извлечь от туда ДС, то есть у сотрудника инкассации доступа к мешку с деньгами быть не должно.
Весь цикл работы выглядит следущим образом:
- В кассе пересчета "взводится" пустая сейф-кассета
- В зведенном виде кассета доставляется до устройства самообслуживания сотрудником инкассационной службы
- Сотрудник ИС устанавливает сейф-кассету в устройство самообслуживания
- Устройство принимает в себя определенное количество ДС до тех пор пока мешок не заполнится
- Далее снова приезжает сотрудник ИС и извлекает сейф-кассету из устройства
- В момент извлечения кассеты вырез для приема ДС автоматически запирается и у сотрудника ИС тем самым блокируется доступ к ДС
- Сотрудник ИС везет наполненную кассету в кассу пересчета
- Сотруднки кассы пересчета с помощью ключа открывает кассету и извлекает ДС
и далее всё по кругу
Примеры фотографий сторонних производтелей:
Пример принципа работы сейф-кассеты можно посмотреть тут:
https://youtu.be/h0atpcrW7ws?si=bbmoSCPkA99asvxd&t=281 (начало с 4:41 ссылка с таймкодом)
Еще один наглядный пример принципа работы :
https://youtu.be/wLj2s5Sxh4E
Что имеется:
Дополнительное тех задание со всеми размерами и CAD файлами
Физический образец и CAD файлы прототипа разработанного нами механизма, которому требуется доработка.
Также есть различные физические образцы нескольких прототипов сторонних производителей в которых можно подсмотреть некоторые решения
Требованяи к продукту:
Проектирование устройства из листового металла (нержавейки)
Наличие механического индикатора системны запирания (2 положения взведена/не взвезеда)
Доработка нашего или разработка с нуля автоматической системы запирания выреза для приема ДС
Минимальное кол-во токарных деталей, а лучше их отсутвие
Разработка стойки в которую вставляется кассета при монтаже
Безопасность самозапирающегося мезанизма и механизма взвода, не должно быть возможности каким то образом "хакнуть" кассету и получить доступ к ДС извне.
Все механизмы механические, без электроники работать должны на пружинах, из электронного будут навешиваться датчики.
Требования к проекту:
Проектирование в AutoDesk Inventor или Solidworks.
Предоставление файлов проекта в форматах этих CAD программ и также в формате STEP.
Проектирование с ориентацией на доступность возможности местных производителей.
Срок реализации задания со всем утвежденными правками - 30 календарных дней.
Готов рассмотреть Ваши условия.
Client's feedback on cooperation with Oleksandr Rudenko
Self-locking safe cassette of the self-service deviceI am satisfied with Oleksandr's work, everything was done qualitatively and on time. I liked the promptness of the feedback; all corrections were accepted by the freelancer without questions.
Freelancer's feedback on cooperation with Aleksandr Yevdokimov
Self-locking safe cassette of the self-service deviceEverything went great, the client is always in touch!
Current freelance projects in the category Engineering
Development of a prototype of an autonomous drone
241 USD
It is necessary to develop a prototype of a drone that will be designed to bury itself under sand or grain and take measurements of humidity and other indicators. It is important to thoughtfully consider the structure and density to prevent small parts from getting inside. An… Engineering, Mechanical Engineering & Instrument Making ∙ 2 days ago ∙ 2 proposals |
Development of the apartment intercom call blockDevelopment of the apartment intercom call block: - call from the intercom and audio-video communication between the intercom and the handset/video intercom/mobile application in the apartment - Opening doors with keys, handset/video intercom/mobile application- Remote control… Engineering, Embedded Systems & Microcontrollers ∙ 3 days 15 hours ago ∙ 2 proposals |
I will buy promising developments in the engineering field: details, components, effects, processes.
482 USD
Hello everyone. I am looking for engineers (electronics engineers, designers, analysts, researchers, and others) who have ready-made (that is, previously created) promising or innovative developments (I call them digital assets) and are willing to share them for monetary… Engineering, Mechanical Engineering & Instrument Making ∙ 3 days 17 hours ago ∙ 2 proposals |
Analysis of the technological project idea (startup)
482 USD
Hello everyone. I have an idea (more precisely, a described concept) for creating a technological startup (at the intersection of the R&D, Deep Tech, and Digital/Virtual Engineering sectors). The most similar project (but it is not a direct competitor) is the project… Engineering, Data Processing ∙ 4 days 8 hours ago ∙ 2 proposals |
Filling out the budget in the AVK-5 programTo participate in the tender, it is necessary to fill out the existing estimate with zero prices according to our proposal in accordance with current legislation in the AVK-5 program Engineering, Architectural Design ∙ 9 days 12 hours ago ∙ 3 proposals |