Budget: 1200 UAH Deadline: 2 days
Здравствуйте. Интересуюсь вашим проектом. Цена указана за 1 шт.
Добрый день, креативщики!
Необходимо сделать взрыв-схему нескольких (3-5) ювелирных изделий (подобие - см.вложение).
Мы такого еще не делали, но знаем что должно получиться в результате.
Есть исходник в 3D-max, jpg, raw или можем сохранить в том формате, который нужен.
Очень важно, чтобы естественно выглядели цвет серебра, золота, камней и т.д..
Просьба указывать сроки и стоимость за 1шт.
Спасибо!
Budget: 1200 UAH Deadline: 2 days
Здравствуйте. Интересуюсь вашим проектом. Цена указана за 1 шт.
Budget: 6000 UAH Deadline: 5 days
Здравствуйте, огромный опыт в области ювелирки, и 3д технологий в целом
работы: http://craftdevelopment.top
Обращайтесь, буду рад сотрудничеству
Budget: 1000 UAH Deadline: 3 days
Большой опыт в создании ювелирки в 3д..
Примеры http://3dvector.net/portfolio/3d-visualization/jewelry.html
Skype dmytriysdОкончательно по ценам после того как увижу исходники...
Budget: 400 UAH Deadline: 1 day
Обращайтесь. Обсудим
Budget: 400 UAH Deadline: 1 day
Готов выполнить
Budget: 300 UAH Deadline: 1 day
Добрый день. Большой опыт работы с золотом и продукцией для рекламы.
Срок выполнения 8 часов/модель, 200-400 грн.
Budget: 400 UAH Deadline: 2 days
Портфолио на http://andreydesigner1995.wordpress.com/.
Обратите внимание на раздел с 3d-графикой —https://andreydesigner1995.wordpress.com/interior-and-3d/
Тел.: (066) 483-16-82 (viber&telegram)
Skype: andrey.volotkovskij
E-mail: [email protected]
Budget: 500 UAH Deadline: 2 days
Обращайтесь.
Budget: 400 UAH Deadline: 4 days
Здравствуйте. Я инженер-конструктор с большим опытом работы. Не вижу сложностей при выполнении Вашего проекта. Исходник желательно obj (но не критично).Цена указана за одно изделие.Качество гарантирую лучше чем в примере.
Budget: 450 UAH Deadline: 1 day
Добрый день! Интересное задание и я могу выполнить его. Есть опыт в обработке ювелирных изделий для каталога. На вашем примере цвет золота не самый реалистичный. Обращайтесь)
Budget: 500 UAH Deadline: 3 days
Сделаю в KeyShot.
Цена за один штук.
Budget: 400 UAH Deadline: 1 day
Добрый день!
Готов выполнить работу.
Портфолио- Freelancehunt
Контакты: +380937455072, [email protected]
Budget: 400 UAH Deadline: 2 days
Здравствуйте!
Думаю смогу сделать и быстрее
Цена указана за штуку...
Конечно сначала нужно посмотреть за исходник...чтоб определиться со сроками, но думаю что сделаю довольно быстро...
Если правильно понимаю то еще и необходимо сделать рендер? Если да то какое разрешение должно быть?
Да, верно, рендер нужен.
Разрешение - чтобы можно было распечатать в типографии на рекламный щит 3х6м
Без проблем. По стоимости тогда выйдет 500 грн. за одно изделие и по срокам на 1-2 дня больше.
A 3D model of a pocket mirror needs to be created for CNC production from wood. Please contact with proposals. Thank you.
A person is needed who can work with 3D animation. Task: recreate a 3D image on a face of a similar nature and then overlay this on "Before" and "After," as a result of transformation after the procedure. Important: to do it manually (NOT AI), own idea and interpretation.
1. General GoalCreate a dynamic interface element based on the provided template, consisting of three angles of a cup (Front cup, Back view, Side view). When clicking on any print option, the image must change simultaneously and synchronously on all three cups considering the angle, volume, light, and shadows for each position. 2. Output File Requirements (For Designer / PSD Template)The basic layout must be prepared in PSD format. To automate and facilitate print replacements, the structure should be based on linked smart objects (Linked / Duplicated Smart Objects).Main requirement for PSD architecture: The layout must have one master smart object with the print layout. The designer duplicates it for three angles, but applies individual transformations to each duplicate: For the front cup: Print deformation at the center (Transform -> Warp or Cylinder). For the back view: Texture shift (showing the reverse side of the layout) + cylinder deformation. For the side view (near the handle): Texture shift to the edge + stronger perspective compression closer to the handle.Layer structure for each of the 3 angles: Group "Shadows & Highlights" (Top layer of the angle): Individual for each angle. Highlights: Layer with glossy reflections. Mode: Screen or Linear Dodge. Shadows: Layer with a gradient that defines the cylindrical volume. Mode: Multiply. Layer "YOUR PRINT" (Duplicated Smart Object): Has individual deformation and shift settings for the specific angle. Layer "Cup Base" (Base of the cup): Body, handle, and inner part at their angle. Layer "Global Shadow": Shadow on the surface under each cup.Note for the designer: When saving a new design inside the master smart object, the print must automatically and correctly update on all three angles of the cup in PSD. 4. Behavior Logic and Animation
Quality visualization of an apartment is needed, 3d max, corona render, according to the technical specifications, with an area of 170 m2, in a modern style, deadline - 1 month, cost 6$/m2.
It is necessary to develop the design and a ready layout for printing/cutting a tabletop POS stand for the Fesco Ultra brand. The stand will be used for presenting the brand's products: toothpaste, toothbrushes, dental floss, and floss picks. We provide approximate references for better understanding below. The left side of the stand - shelves/niches for Fesco Ultra toothpaste. It is necessary to provide space for 4 tubes: 2 on top and 2 on the bottom. The right side of the stand - area for toothbrushes and floss. It is necessary to provide space for the vertical placement of toothbrush packaging (so that they are securely held), as well as a lower shelf/niche for dental floss and floss picks. The central part of the stand - game mechanics. At the top, the visitor drops a ball, it falls down, bouncing off pins/obstacles, and lands in one of the lower compartments. Each compartment will have a prize or action written on it. At the bottom of the central game panel, separate compartments for game results need to be provided, each of which must be equipped with a place to insert a variable card with the name of the prize. The design should allow for quick manual card changes. The solution can be in the form of slots, grooves, or transparent holders - the main thing is that the cards can be easily inserted, removed, and replaced. It is important that the mechanics work: the ball must fall freely, not get stuck between the pins, not fly out of the stand, and land in one of the compartments. It is necessary to think through the placement of the pins, edges, transparent front panel/protection, hole or area for launching the ball, as well as the lower compartments for fixing the game result. It is also important to consider how to easily retrieve the ball. As a result, we need to obtain: A structural drawing of the stand at a scale of 1:1. A layout for printing and cutting/milling. Separate layers for printing, cutting, creasing/folds, and technical elements. A visualization of the finished stand with products. Final files in formats suitable for production transfer. On our part, we will provide everything necessary for the work: product dimensions, logos, photos/layouts of goods, references, style preferences, and other materials needed to create the finished stand layout. We are open to collaboration. The cost of work is negotiable and can be discussed after clarifying all project details.