Budget: 200 UAH Deadline: 2 days
Я могу и за день управлятся с такой работой, Работа в Автокаде, Максе, фотошопе. Опыт работы 5-6 лет в сфере Архитектры/дизайна.
Нам нужен человек, который может начертить в масштабе эскиз межкомнатной двери с указанием всех размеров (зазоры, наличник, короб, петли, полотно и т.д.). Мы производим межкомнатные двери и на каждый заказ нужно делать эскизные чертежи дверей чтобы заказчик их подписывал и этот чертеж прилагался к договору. Оплата за каждый чертеж оговаривается отдельно т.к. сложность работы может быть разная. Время на эскизы к каждому заказу 1-2 дня.
Budget: 200 UAH Deadline: 2 days
Я могу и за день управлятся с такой работой, Работа в Автокаде, Максе, фотошопе. Опыт работы 5-6 лет в сфере Архитектры/дизайна.
Budget: 208 UAH Deadline: 1 day
Сделаю без предоплаты скайп: turuta51
Budget: 600 RUB Deadline: 1 day
Здравствуйте. Давайте обсудим детали более подробно. Пишите на почту или стучите в скайп.
Budget: 200 UAH Deadline: 1 day
День добрый.
Буду рад сотрудничеству. Опыт работы 25 лет (производство дверей, окон, мебели, лестниц).Программы AutoCAD, 3ds Max.
Примеры моих работ смотрите в портфолио.
Пишите, обговорим детали.
Budget: 200 UAH Deadline: 2 days
Предлагаю свои услуги. работаю в AutoCAD, КомпасV16, Keyshot. цена после обсуждения проекта.
работы в профиле
Budget: 200 UAH Deadline: 2 days
Sketch Up
В лс, [email protected]
Budget: 200 UAH Deadline: 2 days
Буду рад сотрудничать с вами.
Budget: 200 UAH Deadline: 2 days
готов сотрудничать
Budget: 200 UAH Deadline: 1 day
Здравствуйте. Занимался аналогичными заказами, примеры в портфолио. Обращайтесь.
Budget: 200 UAH Deadline: 2 days
предлагаю свои услуги
Budget: 200 UAH Deadline: 1 day
Готов обсудить и выполнить
Budget: 200 UAH Deadline: 2 days
Здравствуйте, Дмитрий.
Вычерчу в требуемом формате (Солид, Автокад). Возможна визуализация и фотомонтаж.
С уважением, Виктор
[email protected]
Budget: 400 UAH Deadline: 3 days
Сделать - не вопрос, работаю в SolidWorks...
Цена, сроки - условные.
Design a case model for an electronic device for 3D printing, and also for future use with a syringe press. The case must have openings for USB-A, USB-C, BH-8 connector, display, a hole for an internal reset button, openings for buttons and button pushers. The board can be completely redesigned if your design is more ergonomic. An approximate appearance is shown in the photo.
I wish to create a 3D visualization of the room's interior to understand the comprehensive layout of the furniture and the overall picture after the renovation. I already have all the photos of the furniture elements; they need to be arranged in the space to give the room the appearance it should have after the renovation.
Modification of the STL model of the impeller for 3D printing (PETG)There is a ready STL model of a two-blade propeller for a jet ski SUP board. The geometry of the hub and the seat for the shaft are completely satisfactory, they do not need to be changed.What needs to be done:“Cut off” the old 2 blades from the existing hub.Design 3 new blades from scratch.The radial gap between the edge of the blades and the inner wall of the housing (nozzle) must be strictly 1.5 mm.Technical data for calculating angles and pitch:Motor: Brushless, KV\ 200 (diameter about 50 mm).Power supply: 42 V battery (BMS 60 A).Controller: VESC 75200 V2.The model must be optimized for FDM printing with PETG plastic (strong fillets at the junctions of the blades to the hub).
Good day. The essence of this project is to create product photos for the website. I will provide the approximate style and designs of the houses. I will provide samples of how it should look. Please send samples of your work. And we will collaborate.
3D model of an armrest and foot support (outlined in the photo) is needed for CNC machining armrest 6x6x50 cm Maximum width of the lower part is approximately 11 cm Height 30 cm