Budget: 20000 UAH Deadline: 30 days
Добрый день! Готов выполнить ваш заказ. Могу сделать точную модель по предоставленному фото с UVW Unwrap разверткой. Имеются подобные работы.
Здравствуйте.
Нужно создать модели обуви (только женская,в основном туфли) .Максимальная точность с фото + uv развертка модели. Визуализация не требуется, только модель. Оплата по факту выполнения за каждую модель.
Сроки: от 1 до 1,5 месяца
Позже (в течении месяца) добавится еще 5-6 моделей. (на них будет выделено доп. время)
Пишите, пожалуйста, только если Вы уверены что сможете смоделировать модели качественно )
Фото моделей по ссылке:
https://www.dropbox.com/sh/54u9pj8p9c0357s/AAAosAy3ltqBKDFBHOz6iwJ9a?dl=0
(Могу предоставить доп. фотографии)
Присылайте своё портфолио.
Отвечу на все вопросы.
Budget: 20000 UAH Deadline: 30 days
Добрый день! Готов выполнить ваш заказ. Могу сделать точную модель по предоставленному фото с UVW Unwrap разверткой. Имеются подобные работы.
Budget: 20000 UAH Deadline: 30 days
Готовий це виконати. Є досвід створення різних моделей, чимало зробив за фотографіями. Зараз загалом вільний від інших проектів, тож можу зосередитись саме на цьому. У портфоліо є приклади роботи. Звертайтесь)
Budget: 20000 UAH Deadline: 30 days
Добрый день.
Последние мои 2 проекта были моделирование картриджа в 3D max по фотографиям и габаритным размерам. Результат можете посмотреть в моем портфолио.
Готов выполнить ваш проект.
Более обширное потрфолио по ссылке Behance
Budget: 20000 UAH Deadline: 10 days
Добрый день
моделирую модели любой сложности(последняя модель была яхта)
мое портфолио
http://www.coroflot.com/artmaestro/3d
готов сотрудничать
Budget: 20000 UAH Deadline: 30 days
Здравствуйте. Большой опыт в моделировании,качественная развертка,максимальное приближенность модели к оригиналу. Примеры работ на этом сайте. Пишите обсудим детали
Budget: 20000 UAH Deadline: 30 days
Здраствуйте. Большой опыт в 3D моделировании. Работаю в Blender3D. Обращайтесь.
Примеры моделей которые были использованы в видео: Behance
Budget: 20000 UAH Deadline: 25 days
Здравствуйте, есть опыт в моделировании обуви
Freelancehunt#&gid=159782&pid=24
работаю в Zbrush и MAYA.
Freelancehunt
Под что модели ? под WebGl ? Какой полигонаж? Карты нужны? нормалы там разные или бампы
Я вот так не думаю ! Вы же не предлагаете людям смоделировать швы и каждую ниточку! А значит нужны карты ...или все же?
И опять таки ! Ресурс!? где будет использоваться модель! Если для обычных рендеров то не столь важно. Если для WebGl как вы демонстрировали в прошлом проекте ..то думаю 2 миллионов полигонов на модель будет проблемой!
Хм )
Модель будет использоваться как по примеру: https://www.sergiorossi.com/roe-en/catalog/product/view/id/9998/catalog/product/view/id/9998/?p=upper:crash_sr:tourmaline&p=plate:crystal_sr:crystal&p=lining:calf_lining_sr:beige&p=sole:leather_sr:black&p=shadow:default:default
На выходе будет визуализация в 24 кадра (24 ракурса) (в итоге эти кадры потом будут на сайте для прокрутки)
Швы не требуются
Спасибо за ответы. Меня заинтересовал ваш проект. Имеется большой опыт моделирования различных объектов по фото. Могу предоставить примеры качества в личной переписке.
Хочу обсудить с вами детали проекта. Напишите, пожалуйста, мне в личку (вы отключили возможность отправлять вам ЛС) Могу начать работу уже с понедельника.
Полигонаж до 150к (Вообще этот пункт не очень важен, так как всё будет идти на визуализацию)
Майкл, здравствуйте.
Конкретизируйте, пожалуйста, пункт о "смоделировать модели качественно".
Что имеется ввиду под "качеством"? Например, количество полигонов, плотность сетки или что-то ещё?
Желаю успехов в работе на Сервисе.
Олег
Здравствуйте! Я так понимаю, материалы не нужны? Только корректная развертка?
Софт важен?
Интересный проект, только я занят на ближайшие полтора месяца. Если будет актуально в дальнейшем, можем посотрудничать.
A 3D model of a pocket mirror needs to be created for CNC production from wood. Please contact with proposals. Thank you.
A person is needed who can work with 3D animation. Task: recreate a 3D image on a face of a similar nature and then overlay this on "Before" and "After," as a result of transformation after the procedure. Important: to do it manually (NOT AI), own idea and interpretation.
1. General GoalCreate a dynamic interface element based on the provided template, consisting of three angles of a cup (Front cup, Back view, Side view). When clicking on any print option, the image must change simultaneously and synchronously on all three cups considering the angle, volume, light, and shadows for each position. 2. Output File Requirements (For Designer / PSD Template)The basic layout must be prepared in PSD format. To automate and facilitate print replacements, the structure should be based on linked smart objects (Linked / Duplicated Smart Objects).Main requirement for PSD architecture: The layout must have one master smart object with the print layout. The designer duplicates it for three angles, but applies individual transformations to each duplicate: For the front cup: Print deformation at the center (Transform -> Warp or Cylinder). For the back view: Texture shift (showing the reverse side of the layout) + cylinder deformation. For the side view (near the handle): Texture shift to the edge + stronger perspective compression closer to the handle.Layer structure for each of the 3 angles: Group "Shadows & Highlights" (Top layer of the angle): Individual for each angle. Highlights: Layer with glossy reflections. Mode: Screen or Linear Dodge. Shadows: Layer with a gradient that defines the cylindrical volume. Mode: Multiply. Layer "YOUR PRINT" (Duplicated Smart Object): Has individual deformation and shift settings for the specific angle. Layer "Cup Base" (Base of the cup): Body, handle, and inner part at their angle. Layer "Global Shadow": Shadow on the surface under each cup.Note for the designer: When saving a new design inside the master smart object, the print must automatically and correctly update on all three angles of the cup in PSD. 4. Behavior Logic and Animation
Quality visualization of an apartment is needed, 3d max, corona render, according to the technical specifications, with an area of 170 m2, in a modern style, deadline - 1 month, cost 6$/m2.
It is necessary to develop the design and a ready layout for printing/cutting a tabletop POS stand for the Fesco Ultra brand. The stand will be used for presenting the brand's products: toothpaste, toothbrushes, dental floss, and floss picks. We provide approximate references for better understanding below. The left side of the stand - shelves/niches for Fesco Ultra toothpaste. It is necessary to provide space for 4 tubes: 2 on top and 2 on the bottom. The right side of the stand - area for toothbrushes and floss. It is necessary to provide space for the vertical placement of toothbrush packaging (so that they are securely held), as well as a lower shelf/niche for dental floss and floss picks. The central part of the stand - game mechanics. At the top, the visitor drops a ball, it falls down, bouncing off pins/obstacles, and lands in one of the lower compartments. Each compartment will have a prize or action written on it. At the bottom of the central game panel, separate compartments for game results need to be provided, each of which must be equipped with a place to insert a variable card with the name of the prize. The design should allow for quick manual card changes. The solution can be in the form of slots, grooves, or transparent holders - the main thing is that the cards can be easily inserted, removed, and replaced. It is important that the mechanics work: the ball must fall freely, not get stuck between the pins, not fly out of the stand, and land in one of the compartments. It is necessary to think through the placement of the pins, edges, transparent front panel/protection, hole or area for launching the ball, as well as the lower compartments for fixing the game result. It is also important to consider how to easily retrieve the ball. As a result, we need to obtain: A structural drawing of the stand at a scale of 1:1. A layout for printing and cutting/milling. Separate layers for printing, cutting, creasing/folds, and technical elements. A visualization of the finished stand with products. Final files in formats suitable for production transfer. On our part, we will provide everything necessary for the work: product dimensions, logos, photos/layouts of goods, references, style preferences, and other materials needed to create the finished stand layout. We are open to collaboration. The cost of work is negotiable and can be discussed after clarifying all project details.