Creation of 3D models of people at a scale of 1/350 for 3D printing
178 USD Human models are created at a scale of 1/350 - the height of a standing figure should be 5mm. The approximate level of detail is shown in the attached photos.
1. Model poses:
1.1 Standing person (conditionally in civilian clothing)
1.2 Sitting person (conditionally in civilian clothing)
1.3 Person sitting on a jet ski
1.4 Standing military
1.5 Standing military looking through binoculars
1.6 Sitting military
1.7 Military kneeling on one knee
1.8 Military with a MANPADS on shoulder
Reference photos of poses will be provided
2. What to pay attention to:
2.1 The pose should form a maximally cohesive geometry without separate protruding details. Arms are predominantly pressed to the body, legs are joined. Of course, there is no point in modeling separate fingers, etc.
2.2 Characters should be "well-fed" (but not fat), do not create thin characters in tight clothing with thin limbs - they are complicated to produce
2.3 The bottom should be flat for ease of installation on a surface
2.4 Each character should be made in a version with a support heel (approximately a circle with a diameter of 2mm and a height of 0.4mm) and without
2.5 Ready-made ones from "libraries" can be used provided that these and technical requirements are met
3. Technical requirements:
3.1 It is preferable (but not mandatory) that the geometry does not intersect with itself
3.2 The geometry should not have holes, meaning the internal and external parts should be isolated
3.3 Separate details protruding more than 1mm should not have a cross-section smaller than 0.25x0.25 mm.
3.4 A relatively rational number of faces
3.5 The output file must be in STL format
<Desired completion time is up to 5 days. For control, files need to be issued gradually
Applications 2
Client's review of cooperation with Lyudmila Gumenyuk
Creation of 3D models of people at a scale of 1/350 for 3D printingThe work is done qualitatively, the technical component and the artistic level correspond to the specifications.
Freelancer's review of cooperation with Andrii Sakurov
Creation of 3D models of people at a scale of 1/350 for 3D printingAndriy, thank you for your cooperation and patience! I was a bit late with the deadlines, but Andriy was understanding about it. The project is interesting. The client is decent and polite. I recommend!
-
15 days178 USD
1900 17 0 15 days178 USD
Good day, I am Oleksiy, a 3D character artist. I have experience in creating models for printing and CNC, particularly photopolymer printing. I guarantee a creative approach and professionalism.
I possess high-level 3D sculpting skills.
The exact price and deadlines will be determined after agreeing on all the details of the project.
Google Drive Knight 2
https://www.youtube.com/watch?v=MS2fvTwC-5M Haku
https://www.youtube.com/watch?v=_JnPhwzcXHg chumak
https://youtu.be/9OlIlbc5k5w Exo new
Google Drive Grefa
… Google Drive Orc
portfolio
https://fixedfoxes1.artstation.com/
Google Drive
-
Winning proposal5 days178 USD
8058 81 0 Winning proposal5 days178 USD
Good day, Andriy! I am interested in your project. I am ready to complete it within the specified timeframe. I guarantee quality, I have considerable experience and examples of similar work.
-
5 days178 USD
1820 55 0 5 days178 USD
Good day, I will be happy to help you with your project, feel free to reach out and we will discuss everything.
-
5 days178 USD
625 7 0 5 days178 USD
Hello, the task is as clear as possible, the quality will be no worse than shown in the examples, and it will also be done on time.
I am proficient in software for 3D modeling, examples can be viewed here.
https://youtu.be/Z__UbVBgFwI
https://youtu.be/po-NPt4AB_4
-
1:350 - це приблизно 0.5 см зріст фігурки. які деталі ви там хочете побачити крім того шо голова і кінцівки?
-
все, бачу 🙂
-
Current freelance projects in the category 3D Modeling
Designing parts (pads for a bag for 3D printing)
22 USD
A 3D model of a dismountable last for assembling a bag needs to be developed for subsequent printing on a 3D printer. Initial data A hand sketch with the main dimensions. The width, height, and taper parameters of the last (in the sketch photo) A DXF file with the outline of… 3D Modeling, Object Design ∙ 6 hours 31 minutes back ∙ 8 proposals |
Visualization of a chair
45 USD
There is a 3D model of a chair. Changes need to be made to the backrest and the fabric on the seat needs to be replaced. It should be made as similar as possible to the photo. I am attaching the photo. I will provide more detailed specifications with links to the fabric textures… 3D Modeling ∙ 1 day 8 hours back ∙ 43 proposals |
3D model of a "banana" bag with a die-cut handleTask: 3D model of a "banana" bag with a die-cut handle (for interactive mockup)1. Purpose A parametric 3D model of a polyethylene "banana" bag with a die-cut handle. The model will be used in a web viewer (Three.js / glTF) for an interactive mockup: the client's print layout is… 3D Modeling ∙ 1 day 8 hours back ∙ 2 proposals |
3D Model of the HOTAS Handle
100 USD
A 3D modeler with experience in Rhino or Plasticity is needed to create an ergonomic CAD model of a HOTAS grip (joystick handle). The basis should be the Virpil Constellation Alpha, and its external shape and ergonomics should be reproduced as accurately as possible based on the… 3D Modeling ∙ 2 days 8 hours back ∙ 2 proposals |
I am looking for a FreeCad program instructor.I'm looking for a FreeCad instructor. The goal is to learn how to design technical parts for 3D printing. 3D Modeling, Tuition ∙ 3 days 7 hours back |
Kyiv