Визуализация готовой 3 Д модели дивана в интерьере с супергероем

Modification of the STL model of the impeller for 3D printing (PETG)There is a ready STL model of a two-blade propeller for a jet ski SUP board. The geometry of the hub and the seat for the shaft are completely satisfactory, they do not need to be changed.What needs to be done:“Cut off” the old 2 blades from the existing hub.Design 3 new blades from scratch.The radial gap between the edge of the blades and the inner wall of the housing (nozzle) must be strictly 1.5 mm.Technical data for calculating angles and pitch:Motor: Brushless, KV\ 200 (diameter about 50 mm).Power supply: 42 V battery (BMS 60 A).Controller: VESC 75200 V2.The model must be optimized for FDM printing with PETG plastic (strong fillets at the junctions of the blades to the hub).

I need to create a visualization of the bedroom according to my technical assignment. The existing furniture should be replicated, or similar ones can be used, and the area opposite the bed should be completed with an electric fireplace and a television. There should be hidden lighting with moldings on the ceiling. Additionally, replace the curtains and add some decor on the walls. The area of the room is 18 m². There may be a possibility for long-term collaboration.

Good day. The essence of this project is to create product photos for the website. I will provide the approximate style and designs of the houses. I will provide samples of how it should look. Please send samples of your work. And we will collaborate.

3D model of an armrest and foot support (outlined in the photo) is needed for CNC machining armrest 6x6x50 cm Maximum width of the lower part is approximately 11 cm Height 30 cm

All information below: https://docs.google.com/document/d/19oJ6DM58uJFDI_qVBMGXquDpyAQTzwMk6xY8JG5TXSM/edit?usp=sharing https://docs.google.com/document/d/19Gi6KvN8vCPYtjYyxNuoqA03deaSnVx6C-1oqTszDww/edit?usp=sharing https://docs.google.com/document/d/1sA_2mhP6xRXiwppwKarYi4t-yqX10NccBn5CSgCa4LI/edit?usp=sharing