AutoCad Drawing
6 USD Client's review of cooperation with Mariya Y.
AutoCad Drawingperforming a job at a high level one pleasure to work with this specialist
Freelancer's review of cooperation with Vladislav G.
AutoCad DrawingThank you for cooperation. Clearly set task, all necessary clarifications, timely payment. I recommend cooperation.
-
2 days6 USD
102 2 days6 USD
Hi, I have experience working in the autocade over el. Schedules of 1.5 years. Education of Energy Engineer. I would be happy to help with the drawings.
-
1 day6 USD
396 5 1 1 day6 USD
Good day !
Ready to cooperate with you!
I’m working on ArchiCAD and AutoCAD.
-
1 day6 USD
15 1 day6 USD
Hello, I can help you do everything quickly and quality. There is experience – contact
-
1 day6 USD
166 8 0 1 day6 USD
Good day
If you are considering the option of several performers, you are ready to help from time to time.
But first, I want to look at the typical scheme. How much time it will take and is it worth $10?
-
2 days6 USD
74 2 days6 USD
Good day .
I do drawings in the autocad and archicad programs.
I’m looking for a job, so your proposal was interesting.
I can take examples of work.
My email is [email protected]
-
1 day6 USD
159 1 0 1 day6 USD
Hello to you. Ready to perform. 10 years experience in design, but not in electricity.
Good knowledge of Autocad.
-
1 day6 USD
512 8 0 1 day6 USD
Good time of day.
I work as an electricity engineer with about three years of experience. I work mainly in the autocade, respectively, the speed of "risk" schemes and plans is quite high.
I can show examples of the drawings performed if necessary.
I will be happy to cooperate.
-
1 day6 USD
105 1 day6 USD
-
1 day6 USD
419 11 0 1 day6 USD
Hello Vladislav.
First you need to prepare blocks, types of lines, create layers, select colors.
The first leaves will be more expensive then cheaper, and after 10 leaves you will make it yourself quickly.
-
1 day6 USD
59 1 day6 USD
Welcome to Vladislav! I have been a designer engineer for 10 years and I have been developing a technological part. I have been working in AutoCAD for more than 10 years. Remove the trial task, so check how I fit you as an executive.
Email: [email protected]
-
1 day6 USD
2631 41 1 1 day6 USD
Good day !
I propose cooperation.
Architect and designer.
Some of my work is
Behance
Email: [email protected]
The Mob.: 095 332 88 97
-
1 day6 USD
354 20 0 1 day6 USD
Welcome, I am ready to cooperate. I work in Compas-3D, SolidWorks, and AutoCAD.
-
Winning proposal1 day6 USD
401 13 0 Winning proposal1 day6 USD
Hello to you. I propose cooperation.
I drive the car quickly and without mistakes. The electrical schemes didn’t draw, but I’ll find out, I’ll ask if. Let’s try it, we’re sure we’ll work.
+38(063)142-08-24
-
1 day6 USD
1696 46 0 1 day6 USD
Hello to you. Ready to perform. 18 years of experience in design, but not in electricity.
Good knowledge of Autocad. Post for drawings .dwg [email protected]
-
1 day6 USD
649 43 0 1 1 day6 USD
Vladislav, hello to you!
I have a lot of experience in AutoCad.
I am very pleased to work on your project.
All details can be discussed in a personal letter.
Please contact me, I’m always in contact.
- - - - - - - - - - - -
Email - [email protected]
-
2 days6 USD
116 2 days6 USD
Hello to Vladislav!
I can make drawings for you in the .dwg Autocode format as soon as possible
If you are interested, write to me.
Post - [email protected]
Congratulations to you Yuri!
-
7 days6 USD
512 92 0 2 7 days6 USD
Hello to you. Experience in this program over 5 years. Examples of work can be put in Ls. Can you send an example of a task? Ready for long-term cooperation.
-
2 days6 USD
74 2 days6 USD
Good time of day. Ready to discuss and begin the task. Portfolio
Behance
-
1 day6 USD
149 1 day6 USD
Good day .
I make quality and fast drawings in the AutoCAD program. Working experience more than 5 years.
Viber/Telegram +380957973805
Post by [email protected]
-
1 day6 USD
667 39 0 1 day6 USD
Good day . I will perform quality. turn to
[email protected]
-
Приветствую Владислав Горб!
А можно узнать формат листа? А4 или А0? Не покажете образец для наглядности?
Можна в личку, ну или в скайп yesserg.
C уважением С. Есенин.
-
мне все равно какой лист должно быть видно текст при печати и мне нужно для каждого чертижа шкала 1:50 или 1:100 или 1:250 не включая рамки
-
Фамилия этого зака пишется с маленькой буквы. Он не Горб, а горб. Ну так...бывает.
-
Владислав, Вам нужен именно чертежник или специалист который разбирается в электроснабжении?
-
чертежник ,если есть опыт роботы в электросетей будет исполнителю легче рисовать потому что он будет знать что как почему но эта не проблема я научу
-
Добрий день! Працюю інженером проектувальником, займаюся розробкою робочих проектів марки ЕП, ЕТР, ЗЕМ, АСЗ, БЗ. Маю досвід роботи з програмними комплексами AutoCAD, NanoCAD, KOMPAS 3D, REVIT. Готовий допомогти. Пишіть в телеграм або вайбер +380967742245, обговоримо деталі.
-
Но если этА не проблема, то можно и почертить чертИжи.
-
Если "все равно какой лист должно быть видно..." то давайте чертить чертИжи.
-
А кто такой чертежник? Тот, кто делает чертИжи?
-
Мне интересно, что вам сделали эти 9 ни в чем не повинных нормальных людей, которых вы поотклоняли?
-
Думаете, что они не смогут выполнить чертИжи?
-
да
-
Ну и правильно, я бы и сам стреманулся учиться у специалиста с опытом рОботы, который научит делать чертИжи.
-
за 10 долл могу прислать ссылки на обучающие уроки по Автокаду, 1 ссылка стоит 10 долл
-
Меркулова?
-
зачем фишки палить, так не получиться заработать на платных ссылках на бесплатные уроки
-
Ба-а-а-алин, точно. Это мой косяк. Можно было бы выручку поделить пополам.
Есть еще ссылки на курсы. По Tekla, например.
-
Current freelance projects in the category Architectural Design
SketchUp model of a wooden terrace, pergola, and garden sofa for productionIt is necessary to develop in SketchUp the first stage of the production 3D model of the outdoor module line based on this visual reference: I would like to point out that this reference is entirely AI-generated, so it likely contains many unrealistic joints and strange… Architectural Design, Object Design ∙ 12 hours 5 minutes back ∙ 3 proposals |
Execution of the attic model along with the drawing of roof windowsI commission the creation of a 3D model of the attic based on the project, including the drawing of 5 roof windows in the roof slope and a preliminary concept of its division, taking into account underfloor heating zones and chimneys. Object Design, Architectural Design ∙ 22 hours 32 minutes back ∙ 9 proposals |
Development of steel fence foundationDevelopment of steel fence base We are looking to replace the concrete base with a steel one Shaping and fastening to the post Engineering, Architectural Design ∙ 1 day 1 hour back |
Townhouse PlanningBRIEF FOR THE DEVELOPMENT OF A 2D PLAN Input Data The client provides: * Site survey * Topographic survey Task Develop a concept for the placement of houses 21, 22, and 24 on the site considering: * terrain; * access to the site; * parking; * viewpoints; * sun… Architectural Design, Drawings & Diagrams ∙ 1 day 13 hours back ∙ 9 proposals |
Development of a working project for a single-story house made of SIP panels (90 m²)Good day, I am looking for a project for the construction of a single-story house made of SIP panels. Basic request Area: ~ 90 m². Number of floors: 1 floor. Foundation: Pile + wooden grillage (the pile field needs to be calculated for load-bearing walls). Roof:… Engineering, Architectural Design ∙ 1 day 17 hours back ∙ 6 proposals |
Ашкелон