Чертеж для курсовой работы. (электросхема и спецификация)

It is necessary to develop drawings for the tower scaffolding. Details in the technical assignment. The drawings must be in PDF format with sufficient detail so that a moderately skilled locksmith-welder can perform this work.

Interior design same cafeteria projects for multiple locations ( 20-200 sqm (average 70-90 sqm), two rooms space - kitchen and clients area, sometimes wc) has been developed and updated to many locations, the task is to continue the adaptation to upcoming shops. All 3d models and 2d drawings exist as pre-sets and need only to be modified and adapted to new measurements. Scope of work: 1.⁠ ⁠Adjust furniture layout to the new location. Confirm 2D furniture layout. 2.⁠ ⁠⁠Adjust Facade 2D drawings and Signage (all guidelines will be provided, needs only adjustments) 3.⁠ ⁠⁠3D renders (no need to model from scratch, 3ds max file will be provided, requires only adjustment of the model to the new layout). The quality of the renders is very basic 4.⁠ ⁠⁠2D technical drawings: walls and partitions, sanitary, electricity, lighting, flooring, wall finishes, walls elevations, bar counter elevation, cake display furniture drawings adjustments. No need elevation and furniture drawings for the kitchen. All drawings are very simple level execution, not detailed. Each drawing will be provided to be used for adjustments. Requirements: •⁠ medium knowledge of English just to communicate with team - not with a client (most of the time texting) •⁠ knowledge of 3ds Max (can be other program for modeling, but rendering must be done with 3ds max) •⁠ knowledge of Autocad Project benefits: Could be continuous collaboration, we have around 15-20 locations per year of same project. Project duration: over 1 - 1.5 year approx. Allows flexibility and not a full time work schedule. ------------------------------------------------------------- Please let us know more or less the price per unit. Sometimes we need to make 3-5 times changes. Normally in studio it takes us to finish 1 location in 2-3 working days.

The type-C must match the hole on the step model : It should look impressive for the model + don't forget about the monitor output! Best on black textolite And to avoid the obvious impression that it is not working :) (for the average user) Show me the board in the case

Hello! I am looking for a structural engineer or an experienced 3D designer to create a preliminary 3D model of a construction fastener (a universal flat spacer for securing cables in a groove).At this stage, I need a quality sketch concept (visualization) and basic drawing for evaluation by lawyers. The project will be further developed for the production of a mold (TPA).What needs to be designed: A flat elastic plate (fastener) with the following input data: Product dimensions: Maximum length — 62 mm, maximum width (including teeth) — 40 mm. The base thickness of the plate is about 2.5–3.0 mm. Side edges: Equipped with locking teeth inclined backward (harpoon principle). The spacing between the teeth should be uneven/variable. Central part: A through cylindrical hole with a diameter of 4.2 mm. The front side must have a conical countersink (recess) so that the screw head is hidden inside the plastic. Surrounding the hole, there should be a slight thickening (stiffening rib) to prevent the part from cracking under pressure. Top end: A flat platform for finger pressure with a fine anti-slip texture.What is required as output: A solid 3D model of the part in .STEP or .IGES format. A simple engineering drawing (sketch of the overall view) in .PDF format, considering dimensions and annotations of elements. 2-3 quality renders (isometric, side view) on a clean white background for the patent application.Important requirement: The performer must understand the specifics of plastic injection molding (TPA) and immediately incorporate basic casting drafts (0.5–1.5 degrees) into the concept so that the part is suitable for future production.Please indicate your price for this initial stage and realistic deadlines for completion. I look forward to your responses!

I am looking for a designer to prepare working drawings for exhibition stands. I need a person with experience working with composite materials, who understands their capabilities and limitations, and knows how to properly design parts for milling and production. The task is to create technical drawings, including visualizations: assemblies, sections, dimensions, fastenings, specifications, and other data necessary for the construction manufacturing. It is preferable that the candidate already has experience in exhibition stands, advertising, or decorative constructions and can offer practical, technological solutions for production. Here are some examples of the direction to move in: https://www.instagram.com/market_tablo https://www.instagram.com/crealle/ https://www.instagram.com/artefinal_brasil/ https://www.instagram.com/rahbardesign/ https://www.instagram.com/kiancogroup.cnc/ Attached photos also include samples. In the PDF - the design that needs to be tested currently. It is not guaranteed that this project will be confirmed and go into production, but I need to understand the designer's approach. In any case, the test will be paid. The working area of the milling machine is 2100*4100 (vacuum table and automatic tool change with 7 positions).