- Projects -
- Rating -
- Rating 69
Budget: 1200 UAH Deadline: 10 days
I do it without problems. according to the ergonomic standards. Possible markets
Budget: 10 USD Deadline: 3 days
Ready to perform the work in the best way. I will issue a full detail on which any table can be made. You can install it yourself, which is economical.
Budget: 250 UAH Deadline: 1 day
I do!
- Projects -
- Rating -
- Rating 178
Budget: 10 USD Deadline: 3 days
Good day . Ready to fulfill the order. Write, call, send out the weekend data.
Budget: 50 USD Deadline: 2 days
I will perform.
Budget: 100 UAH Deadline: 1 day
I will design the floor with full detail. Price and time of execution - after receipt of information.
Budget: 500 UAH Deadline: 3 days
Ready to discuss.
Budget: 1000 UAH Deadline: 5 days
See the profile Freelancehunt
The price and deadlines will be specified after the original data is provided.
Possible manufacturing and installation according to the project.
Budget: 150 UAH Deadline: 3 days
Ready to do quality. I would like to see an example of what you want, or the photo of the project you need. Term and price will be discussed individually. And I would also like to know what you need drawings, a 3D model.
Portfolio Freelancehunt
Budget: 200 UAH Deadline: 1 day
You need to see the picture, from 200 UAH.
Aleksandr Sergeich
Winning proposal- Projects 102
- Rating -
- Rating 760
Budget: 200 UAH Deadline: 2 days
The cost and deadline are conditional.
I would like more details to determine.
I can say one thing right away that I will do it well. and ;)
Budget: 10 USD Deadline: 1 day
Good day . It would be good if you would have given an example of a complete appearance (or a link to a similar).
Budget: 20 USD Deadline: 3 days
Working time and price will be specified depending on the complexity of the staircase itself, so I'm glad to help.
Proposals concealed
Proposals are currently absent
-
Oleksandr L. 25 November 2015щось модніше
Можна, тільки це дорожче.
Отой варіянт, що на другій світлині, робиться з повним комплектом креслень для виготовлення за один робочий день.
Зараз мінімальна фрілансівська ставка - це 10$/година. От і рахуйте.
PS. Той хто пропонує зробити цю роботу за 100грн - він що, з когорти меценатів? має інший дохід (чи подружжя його утримує)??? Тому пропоную поважати та не плодити жебраків.

-
Yura Slabko 25 November 2015Предлагаю сделать примерно вот такое, не будете убиваться на винтовых ступенях и двери удобней открывать, осталось уточнить ширину лестницы? ну и срок выполнения 2-3 дня с полным комплектом чертежей цена 450грн. Если устраивает то пишите.

-
Dmitry G. 27 November 2015Можно и посчитать, не проблема. Но только не за указанную
подачкусумму. :) -
Serhii Korchevny 27 November 2015Прект сходів середньої складності із специфікаціями, монтажними кресленнями, шаблонами для плоттера, візуалками і т.д. коштує від 150 до 350$. Проект "бельгійських" парадних сходів від 2000$...
Які саме Вам потрібні?)))
Current freelance projects in the category Architectural Design
A set of documentation is required to perform construction and installation works without the contractor independently making design decisions regarding: planning; height; foundations; retaining walls; entrance group; openings; embedded; engineering network passages; drainage. Based on the ENZ in .DWG format, topographic survey, and general plan. The task is to create an author's planning and height solution so that builders receive a clear set of drawings for earthworks, foundation, and monolithic works that form the basement, retaining walls, entrance group, and surface drainage systems. The work does not include the design of the metal frame of the canopy, the roof of the canopy, and KM/KMD — embedded parts, reinforced belts, etc. Heights, dimensions, and locations of their placement need to be shown. Separate complete engineering sections for HVAC, plumbing, and electrical systems are also not included, but the locations of passages and connections for these networks, channels, and technical openings need to be shown. A set of DWG + PDF is needed, sufficient for performing the work without additional solutions on the construction site. Important: the technical task (TT) is the main document that defines the subject, scope, requirements, and conditions for performing the work. All agreements, criteria for evaluating the result, scope of work, and resolution of disputed issues are carried out based on the approved TT.
Job essence: There is a sketch project of a one-story house (140 sq.m) in pdf. The wall technology (frame) has been chosen and the dimensions have been changed. The layout of non-load-bearing walls has been modified in SketchUp. The layout and concept have been approved. A professional draftsman is required to transfer the project to AutoCAD (2D) with "clean" lines from scratch, correct geometric inaccuracies, and prepare drawings for builders. Important subtask (Normalization of dimensions): The project in SketchUp was created during the creative stage, so there are inaccuracies (for example, cabinets 603 mm, openings 815 mm). The contractor needs to independently round and normalize all dimensions according to construction and furniture standards (door openings strictly according to the specifications, kitchen bases 600/450/300 mm, walls without random distortions in millimeters). What needs to be done in the First (basic) version of the project: 1. Wall layout plan without furniture (there will be a frame): taking into account the thickness of the "layers" of the walls (data will be provided). Clear dimension chains (axes, openings, piers). 2. Plan with furniture and plumbing arrangement: all furniture and plumbing must be placed on a separate layer so that they can be turned off with one button. Furniture should be tied to standard dimensions. 3. Foundation plan (top view) with embedded sewerage: executive sheet for builders. Accurate linear ties (coordinates) of the sewer pipe outlets and embedded sleeves relative to the corners of the foundation/axes. Payment and stage conditions (Important!): Stage 1 (Fixed price): Creation of a basic clean version of DWG from my source materials with normalization of dimensions (as described above). Stage 2 (Time & Material / Hourly payment): After the delivery of a quality first version, adjustments to the layout may be made according to my new requests. These corrections will be paid separately at an agreed hourly rate or for fixed packages of revisions. Please indicate two prices in your response: the cost of the First stage and your hourly rate (or the cost of one round of revisions) for the Second stage. What I provide: 1. Plan in pdf with dimensions of the house and rooms before modifications 2. Link to the SketchUp project or export of this file. 3. Thicknesses and materials of the walls. Standards for rounding (what openings are needed for doors, thickness of kitchen countertops, etc.). Technical requirements for DWG: AutoCAD version no higher than 2018/2020. Drafting strictly in "Model" at a scale of 1:1. Ideal layer hygiene: axes, walls, dimensions, furniture, text - all on strictly separate and clearly named layers. No garbage or broken blocks.
It is necessary to carry out architectural and construction solutions, which will include: 1. Replace the windows of the boiler room; 2. Foundations for equipment; 3. Floor in the boiler room: new screed, tiles; 4. Divide the boiler room into two rooms, execute the foundation and wall; 5. Finish the walls and ceiling. The building model is in Revit.
Make a project for the reconstruction of a summer house. Currently, there is a small cold house. I want to add a room. Redesign the second floor. Insulate and install heating distribution. There is gas available.
A design project for a kitchen is needed, around 20 square meters based on the provided dimensions and several generations for better understanding of the layout of the main elements. Please include an example of kitchen design projects in your proposal to understand what you have worked on, along with an estimate and timeline.

