Budget: 5000 UAH Deadline: 2 days
Good day .I will show the fixation nodes and set the size from the structure to the ground and to the top building.It requires high-quality photographs of the facade of the building under a straight corner (in the facade) in clear weather from the distance from the photographer to the wall of the building 2-3 heights of the facade where it will be constructed so that the sun does not shine in the camera objective.And a few photos to be seen the whole building from the side where the design will be.“...We cannot confirm the correctness of the location of the whole structure relative to other lifts on the whole block....”You can show yourself the distance to the top and bottom of the building and to the edge of the building - up and down, to the right and to the left of the structure on the crossing you need to set the size if you have a olive and linear.Or pay the executive if there is no desire to do it by itself.to the next."In the draft (the type in the cut) there are no dimensions relative to the horizontal direction of the TRC until the end of the exhaust (top and bottom)... ".Soon, it was thought that you need to indicate the distance from the top and bottom of the structure to the walls, balls or columns of the building to which you intend to turn or cook your structure.to the next.In the note is written "... "A also not indicated a fixed structure with a description of the fixation method."Here you need to show how the structure will be turned to the portable structures of the TRC (capital walls, columns, balls).To show this you need to know where and which walls in the TRC building - a metal frame with columns and balls, iron concrete structures or unlikely curved walls.Sandwich Panel
With the heater that is on the crossing we don't take attention because it's not a carrying structure.You need to show the wall or column of the building and show how and where the advertising design will stick to that wall.You need drawing or desire detailed photographs of columns or walls and desire a drawing from the hand where the walls, its thickness and material will be shown.If there is no building project.It is so that I or someone who will do the job showed it on your scheme.Because now the structure is hanging in the air and it seems to be held by someone’s invisible hands.The term and cost are conditional, it may take more or less time.And you can do it yourself faster if you give me information and I will tell you how to do it.But the price will be the same.
