Engineer - Solidworks
11 USD I am the owner of a metal factory.
We are looking for a constant collaboration of engineer-designers.
This is Solidworks.
If everything is OK, then ready to give work on 4 large projects.
Testing of the CMD (paying):
Required a cutting on the outer crownstein (image)
This is for our power frame (you can see us at https://www.duduk.com.ua/product-page/funktsionalna-rama-skladna-duduk-r1-premium)
Wear on the tube 60*60. The tube is in the center.
400 mm total length
The D32 Tube
The fingers do not need to be. It is Cronstein.
We have ready brushes on the same fixation (crossing) (you can see at us at https://www.duduk.com.ua/product-page/brusi-z-orhanayzerom-duduk-r1b-premium-bez-nasichky)
If you have any questions, ask them.
Applications 2
-
1 day11 USD
129 1 day11 USD
Ready for further cooperation. Great work experience at Solidworks, COMPAS engineer designer, more than 10 years
-
1 day16 USD
537 3 0 1 day16 USD
Good day . My name is Vladimir. I offer you my design engineer service. I have experience in the design, design and development of the design documentation of products of different purposes (as general machinery as well as aviation structures, devices, stands, non-standard equipment). If necessary, I will send the images of my works and examples of cracks to your "privacy". Ready for prolonged cooperation. I am a foop. Ready to perform the test task. and :)
-
1 day11 USD
293 1 day11 USD
Good day . I have experience working with leaf metal, complex structures, welding compounds and more. I make models and draw them. I do the work quickly and efficiently, according to TZ.
-
1 day11 USD
1531 40 0 1 day11 USD
If you are interested in my offer on models in SW, and drawing in Compass, please contact me, I can perform professionally under any DSE manufacturing technology.
If not, I will remove the application.
-
1 day11 USD
261 3 0 1 day11 USD
Good day !
I am interested in your project, ready for the partnership.
I have been working in SolidWorks for 15 years. Term and price can be discussed on specific details separately.
Go back, I’m glad to help.
with respect
by Sergey
-
1 day11 USD
10483 182 1 1 1 day11 USD
Good day . Ready to fulfill your task. Go back, I will be happy to help.
-
1 day11 USD
310 1 day11 USD
Good day . I have been working in Solid Works for 12 years. I have experience working with leaf metal, welding structures in metal proct. I will complete your project as soon as possible with the full design documentation.
-
1 day11 USD
652 9 0 1 day11 USD
Ready for cooperation. I am working at SW2018. Write me to answer your questions.
There are examples of the street trainers’ projects.
Good day !
-
10 days223 USD
531 33 0 10 days223 USD
I work with solidworks for more than 7 years, I can do on a constant basis, but 15-20 hours a week. Detailed in PP.
-
1 day22 USD
1754 21 1 1 day22 USD
Good day . Ready to perform your task, I’m working on Solidworks 2022/2024. I have been working on metal furniture for the last 3 years. Go back, I’m glad to help.
-
Добрий день.
Яким чином буде отримуватися інформація для виконанням наступних завдань? Це будуть ескізи з розмірами? Або потрібно буде з фотографій подібних товарів розробляти конструкцію?
Взагалі то краще таке оголошення в розділі вакансій розмістити. Можуть адміністратори зараз закрити проект без виконання.
-
Ivan D. DUDUK
Все просто. Кому це все цікаво, той вже давно написав в особисті і отримав відповіді.
В розділі вакансій є оголошення.
Проект немає причин закривати! Бо ТЗ для проекту є, ставки є, оплата по ставках є. Зробили проект, закрили завдання і всі щасливі. Фрілансер отримав свої гроші за тестове завдання і подальшу співпрацю, Я отримав проект, фрілансхант отримав свій % і подальші розміщення проектів на ресурсі. Питання є?
-
Дуже суб'єктивно (!!!) : коли бачу "тестове завдання" - пропадає всілякий інтерес.
-
Ivan D. DUDUK
Я в шоці
-
Готовий до співпраці
-
зробив модель, куди скидати
-
Current freelance projects in the category Drawings & Diagrams
Development of the KM section of the warehouse with an administrative partIt is necessary to develop the KM section of this project. The building is a warehouse with an administrative part, a metal frame, and sandwich panel cladding. The height is 5m to the lower chord of the truss. Architectural Design, Drawings & Diagrams ∙ 2 hours 19 minutes back ∙ 2 proposals |
Design project of a one-room apartment1. General information: 1-room apartment in a new building Area: 40 m² Condition: rough finish (there is screed, plastering, electrical work) City: Uzhhorod, West Towers residential complex Remote approval Implementation: through a foreman / construction team 2. Project goal… Architectural Design, Drawings & Diagrams ∙ 5 hours 12 minutes back ∙ 10 proposals |
Table support
16 USD
You need to create a project for a table support in AutoCAD and, accordingly, the drawings for it. The project itself is quite simple. The most complicated part is to create just one detail which is the base of the support. Later, you will need to copy it and mirror it in… Drawings & Diagrams, Object Design ∙ 19 hours 28 minutes back ∙ 10 proposals |
Development of CAD diagrams for engineering networks of the warehouse and production complex (water supply/sewerage, p
334 USD
Context and Purpose. We are implementing a warehouse-production complex (basement level, L-shaped room ~63×44.6 m, usable area ~2,330 m², 11 functional zones: reception, storage of GP and raw materials, production areas, cutting, assembly, unloading, showrooms, office, auxiliary… Engineering, Drawings & Diagrams ∙ 21 hours 7 minutes back ∙ 2 proposals |
Furniture for a Sprinter type camper based on a scanned car bodyCamper Furniture Project It is necessary to develop a furniture project based on photos with dimensions that need to be changed during the process for a Mercedes Sprinter type camper based on the provided scanned interior file. Develop a engineering design suitable for real… Drawings & Diagrams, Object Design ∙ 23 hours 58 minutes back ∙ 5 proposals |
Kyiv