Project translated automatically. Log in or register, to view the original Create a sign in a vector.Sign of technical regulations.The final option, which should be attached to the investment.Description of the sign: Three (middle and two side) tops of the triangle (with internal angles of 30 degrees) are placed in the top of the imaginary insert circle with a radius of 0.7 of the main circle, and the fourth (with an internal angle of 80 degrees) - in the bottom.The middle top is the top point of the imaginary insert circle, two sides are symmetrically placed under a 15 degrees corner to the horizontal line passing through its center.The fourth (low) top is at a distance of 0.6 radius of the main circle on the vertical line passing through its center.In the middle of the straight, which connects the center of the circle with the lower top, is the conditional center of the triangle, from which six rays come out.Four of them connect this point with the heights of the triangle, and two are the points of crossing the side lines of the corner created by the middle top, with the horizontal line passing through the center of the imaginary circle.The plates of the triangles on the left of the rays that connect its center with the side and middle heights have the same color as the image of the sign.The length of the break of the main circle is 0.22 of its total length (or 80 degrees).The thickness of the lines of the triangle is 0.01 of the radius of the circle.The thickness of the circle line is 0.05 of the radius of the circle.