Car components
45 USD There is a car model
for technical questions about components
the pivots should be located in one place
so that when changing objects - the coordinates are the same
additional components needed:
- exhaust pipe (6 pcs)
- hood (3 pcs)
- front bumper (3 pcs)
- rear bumper (3 pcs)
- roof air intakes (3 pcs)
- add a plate for the license plate at the back, textures can be replaced
It is necessary to add additional components to the existing car model. The model is mid-poly, and all added components must be made with similar detailing. All component pivots must be located in one place — at the mounting point, so that when replacing objects, the coordinates remain unchanged.
Tasks:
Additional components:
- Exhaust pipes — 6 pcs.
- Hoods — 3 pcs.
- Front bumpers — 3 pcs.
- Rear bumpers — 3 pcs.
- Roof air intakes — 3 pcs.
Additional elements:
- Add a plate for the license plate at the back of the car. The texture of the plate should be made in such a way that it can be replaced, i.e., the textures of the license plate can be substituted later.
Requirements:
- All components must be in mid-poly style.
- The pivots of all components must be located at their mounting points to ensure the same coordinates when replacing objects.
- Components must match the current detailing of the car model.
Необходимо добавить дополнительные компоненты к существующей модели машины. Модель является mid-poly, все добавляемые компоненты должны быть выполнены в аналогичной детализации. Все пивоты компонентов должны быть расположены в одном месте — в месте крепления, чтобы при замене объектов координаты оставались неизменными.
Задачи:
Дополнительные компоненты:
- Выхлопные трубы — 6 шт.
- Капоты — 3 шт.
- Передние бамперы — 3 шт.
- Задние бамперы — 3 шт.
- Воздухозаборники на крышу — 3 шт.
Дополнительные элементы:
- Добавить плашку для номерного знака сзади машины. Текстуру плашки нужно сделать таким образом, чтобы она могла быть заменяема, т.е. текстуры номерного знака можно будет подменять в дальнейшем.
Требования:
- Все компоненты должны быть в стиле mid-poly.
- Пивоты всех компонентов должны быть расположены в месте их крепления, чтобы обеспечивать одинаковые координаты при замене объектов.
- Компоненты должны соответствовать текущей детализации модели машины.
Client's review of cooperation with Oleg M.
Car componentsThe work was completed quickly and on time. Quality and understanding of the project 10 out of 10. I am very satisfied with the work and will reach out again!
Freelancer's review of cooperation with Denys Kovtun
Car componentsGreat client! The technical assignment was clearly defined, with understandable requirements and expectations. All project details were described in detail, which significantly simplified task execution. Throughout the work, the client was always in touch and promptly answered all questions. Payment was made on time and in full. It was a pleasure to work on the project, I recommend this client for collaboration!
-
Winning proposal3 days45 USD
1426 20 0 2 Winning proposal3 days45 USD
Good afternoon
I am a 3D artist specializing in vehicles
You can see my work in my profile
I will easily do your job
But for a clearer assessment of the work in terms of time and price, I need to see this model
Also, I have a couple of questions regarding this model, but we can discuss that in private messages
-
1 day17 USD
2345 47 0 1 day17 USD
Good day!
In which program was the model created? Can we see the current state of the model and the reference of what is needed?
-
2 days45 USD
1877 116 0 1 2 days45 USD
Hello! I can complete your order.
Examples of work
Google Drive
-
3 days67 USD
2952 43 1 3 days67 USD
Good day, I am ready to complete your project! I have extensive experience in 3D modeling and visualization. I am confident you will achieve the desired result! I will be happy to collaborate!
-
книжки також з середини читаєте, як і ТЗ пишете? 🤔
-
Current freelance projects in the category 3D Modeling
Laboratory work on the subject "Modeling of objects and processes in CAD/CAE systems"Complete 7 laboratory works by 19.06 11:00. Submit the reports for the laboratory works as a title page and screenshots demonstrating the progress of the work (no descriptions needed). 3D Modeling, Desktop Apps ∙ 20 minutes back |
Development of a series of road organizers for 3D printingTask It is necessary to develop a series of 3D models of travel organizers for storing oral hygiene products and related accessories. All products must be made in a unified corporate style and perceived as one collection. The models are intended for serial FDM printing on Bambu… 3D Modeling ∙ 8 hours 1 minute back ∙ 11 proposals |
I am looking for a FreeCad program instructor.I'm looking for a FreeCad instructor. The goal is to learn how to design technical parts for 3D printing. 3D Modeling, Tuition ∙ 8 hours 47 minutes back |
Development of 3D animation and character creation from scratch for the website (Preloader / SplashProject Title: Development of 3D Animation and Character Creation from Scratch for the Website (Preloader / Splash Screen) 1. Product Description and Task It is necessary to develop two 3D characters from scratch, set up rigging, and create a short, dynamic 3D animation on a… 3D Modeling, Animation ∙ 8 hours 51 minutes back ∙ 2 proposals |
3D modeling of an arch with the clinic's logo + photorealistic render and a 10–15 second videoLooking for a 3D visualizer / 3D modeler who can work in 3ds Max and can model an interior arch for a dental clinic based on photos. This is not a task for a web developer. A specialist in 3D modeling, visualization, and camera animation is needed. There is a photo where the… 3D Modeling, Interior Design ∙ 12 hours 1 minute back ∙ 13 proposals |
Dnepr