Video editing: testing the real capacity of the battery up to 1:10 minutes

Video

https://mega.nz/file/sQgXTSST#mBpOPuGsbv7_0fnNiAX4_dwcsujMYsR0TR3p9OHrrEc

1. Task of the video

Create a short dynamic video of the capacity test of a RokkeVOLT battery.

Main idea: to show that the battery has a real measured capacity of 6278 mAh, not just the claimed numbers on the label.

The video should look lively, modern, technical, but without excessive "cinematic" complications.

________________________________________

2. Source video

The source video shows the full capacity test of the battery.

Use the fragment:

• Start: from 00:11 of the source video — the moment when the test start is pressed for the second time on the device.

• End: until 01:24:14 of the source video — the moment when the final window with the test result appears on the device.

The full testing process does not need to be shown. It should be compressed into a dynamic timelapse.

________________________________________

3. Format of the finished video

Main format:

• 16:9

• 4K

• Duration: approximately 35–45 seconds UP TO one minute. Maximum 1:10

________________________________________

4. Frame correction

4.1. Geometry

The phone was set unevenly, so it is necessary to:

• align the frame;

• bring the video to a normal horizontal view;

• adapt to the 16:9 format.

Do not use simple mirroring of the side fields as the main option — it looks cheap.

Preferred option for filling the space:

• align the main video and keep it in the center;

• make the background from a duplicate of the same video:

o enlarge;

o blur;

o slightly darken;

o add a light technical/brand look. The logo will be provided

o

If after alignment the fields are small — you can carefully enlarge and crop the frame to reduce the empty space.

________________________________________

4.2. Color and exposure

The source video has overexposure. Basic color correction is needed:

• reduce overexposed areas;

• slightly lower highlights/whites;

• restore contrast;

• make the picture less "washed out";

• improve the readability of the tester's screen;

• do not make the frame gray or dirty.

If the device screen is poorly readable — make a local correction specifically for the display area.

________________________________________

5. Editing and video pace

Do not simply make uniform acceleration of the entire video. A dynamic speed ramp is needed.

Approximate structure:

00:00–00:04 — start

Show a general shot:

• battery;

• connected terminals;

• device;

• start of the test.

Text on the screen:

Checking the real capacity of the power elements in the RokkeVOLT 6400 mAh vacuum cleaner battery

Perhaps to add liveliness to the video, a slight shake of the frame... It's up to you....

________________________________________

00:04–00:07 — acceleration

Smooth acceleration of the video.

Add a graphic line-reference from the device screen to the enlarged information panel.

Text:

Test of power elements in CC (Constant current) mode started

________________________________________

00:07–00:28 — main timelapse

Compress the main part of the test into a fast timelapse.

Speed reference: approximately x200–x250, but the editor should choose the speed so that the final video is lively and understandable.

At this moment, it is necessary to show that the numbers on the device are actually increasing.

It is desirable to make:

• an enlarged "magnifying glass" or duplicated capacity counter;

• an animated battery that gradually fills up;

• a large mAh counter that increases along with the test.

The main thing: the viewer should see that this is not a static frame, but a real measurement process.

Text:

Capacity is increasing...

________________________________________

00:28–00:33 — slowdown before the result

As the test approaches the end, smoothly slow down the video.

Emphasize the numbers that reach the final value.

When the value on the device screen approaches 6000 mAh (approximately 1:20:00 of original time), the speed sharply, but smoothly decreases from x300 to x5, and then to x1. The viewer subconsciously holds their breath, watching as the numbers slowly reach the last milliamp-hours: 6250... 6268... 6275...

Text:

The moment of truth

________________________________________

00:33–00:38 — final result

Show the final screen of the device with the result.

Main visual emphasis:

6278 mAh

Additional text:

6278 mAh actual result in CC (constant current) test mode

This moment should be the strongest in the video: a slight glow, emphasis, a short "success" sound, fixation of the number on the screen.

________________________________________

00:38–00:45 — final infographics / brand

Show a short visual comparison, comparative depiction in the foreground:

• standard battery: 5000 mAh

• RokkeVOLT: 6278 mAh

\\ show that rokkevolt is 23% larger (maybe in the form of a battery drawn 23% larger)

• Column 1: Labeled "Standard battery". Its level rises to the mark of 5000 mAh. Colored in a neutral, gray color. •

• Column 2: Labeled "Rokkevolt". Its level quickly surpasses the first column and stops at the mark of 6278 mAh. Colored in the brand's bright signature color.

• Key emphasis: Between the tops of the columns, an animated arc with an arrow and a massive, bright number " +23% Capacity" appears. Under this title, a breakdown smoothly appears: "More cleaning time. Longer lifespan". \\\

Text:

Up +23% capacity compared to the standard battery of the robot vacuum

Final frame:

• RokkeVOLT logo;

• slogan is printed. The sound of keys is heard:

The best alternative

________________________________________

6. Motion graphics

Graphic style: modern, clean, technical.

Desired direction:

• semi-transparent panels;

• light glassmorphism;

• neat reference lines;

• minimalist technical interface;

• without overloading the frame with small details.

There is no need to make heavy sci-fi/cyberpunk with a lot of noise, glitches, grids, and unnecessary elements. The main thing is clarity and trust.

________________________________________

7. Sound

A modern, but not aggressive sound design is needed.

Desirable:

• light technical background;

• sound of a click at the start;

• whoosh/riser during acceleration;

• light tension before the final result;

• positive tech chime / impact at the moment of 6278 mAh.

•

The sound should not distract from the essence of the video.