Budget: 600 RUB Deadline: 2 days
Обращайтесь!
Работы в профиле.
Подробности в личной переписке.
E-mail: [email protected]
Skype: vinpixels
Нужно сделать баннер размером 800мм*600мм для авто сайта. Дизайн надо сделать в минимал стиле
Budget: 600 RUB Deadline: 2 days
Обращайтесь!
Работы в профиле.
Подробности в личной переписке.
E-mail: [email protected]
Skype: vinpixels
Budget: 600 RUB Deadline: 1 day
Здравствуйте! Имею огромный опыт в разработке рекламы. Обратите внимание на моё портфолио.
_____________________________________________________________
Skype: artem_design100
Почта: [email protected]
Тел: 0977674144
Портфолио: http:// Freelancehunt.
Budget: 600 RUB Deadline: 1 day
Здравствуйте! Могу приступить сейчас. Моя почта: [email protected].
Budget: 600 RUB Deadline: 1 day
Сделаю баннер. Как наз-ся сайт и что должно быть на баннере?
Budget: 600 RUB Deadline: 1 day
Здравствуйте. Заинтересовало ваше предложение.
Вот моё портфолио
http://illustrators.ru/users/aleksandr-kastornyy
Budget: 600 RUB Deadline: 1 day
Здравствуйте. Могу сделать эту работу в срок, мои другие работы можно посмотреть на http:// Behance
E-mail: [email protected]
Skype: metallichibi
Budget: 600 UAH Deadline: 2 days
Предлагаю сотрудничество. Несколько вариантов дизайна на выбор.
Опыт работы дизайнером - более 5 лет.
По стоимости будем договариваться.
Портфолио: Behance и dropr.com/luisaluisa
email: [email protected] Skype: p.s.luiza. Обращайтесь
Budget: 600 RUB Deadline: 1 day
Вечер добрый! Готова приступить к работе прямо сейчас, и в ближайшее время сбросить заказ. Вложусь в работу полностью, если нужна будет доработка - без проблем!
Budget: 600 RUB Deadline: 1 day
Добрый день! Сделаю!)
Budget: 15 USD Deadline: 2 days
+
Budget: 200 UAH Deadline: 1 day
+
Budget: 200 UAH Deadline: 1 day
Добрый день! Готова взять работу сейчас!
Выполню креативно и качественно.
Мои контакты: [email protected], skype: rainbow77720
Budget: 10 USD Deadline: 2 days
+
Budget: 600 RUB Deadline: 1 day
Готов к работе, жду ТЗ.
Budget: 200 UAH Deadline: 1 day
готов взяться)
Budget: 600 RUB Deadline: 2 days
Здравствуйте!
Готова обсудить ваше предложение.
портфолио Freelancehunt
Budget: 200 UAH Deadline: 1 day
СДЕЛАЮ СТИЛЬНО!
Budget: 600 UAH Deadline: 1 day
Обращайтесь. Буду рада помочь
Budget: 600 UAH Deadline: 1 day
Буду рад сотрудничать. Сделаю качественно и в срок. Предоставлю с вариантами. Готов сейчас приступить к работе
почта - [email protected]
скайп: dschayka
Мое полное портфолио находятся на сайте
http://chayka.jimdo.com
Budget: 400 UAH Deadline: 2 days
+
Budget: 600 RUB Deadline: 2 days
Обращайтесь, сделаю.
Budget: 200 UAH Deadline: 1 day
сделаю
Budget: 600 UAH Deadline: 1 day
Готов поработать, начну сейчас
Budget: 600 RUB Deadline: 1 day
+
Budget: 600 RUB Deadline: 1 day
Возьмусь сейчас.
Budget: 215 UAH Deadline: 2 days
Готова приступить к работе. Выполню работу качественно
Budget: 20 USD Deadline: 1 day
Здравствуйте, готов начать работу, хороший опыт в веб-дизайне.
Budget: 30 USD Deadline: 1 day
Budget: 300 USD Deadline: 1 day
Здравствуйте!
Готова приступить к работе!
The goal is to develop the first model of our own series of collectible 3D-printed toy cars in the "kit card" format (car + separate sprue frame with wheels, like in plastic model kits). The series is being created for gift merchandise.
There is a ready-made plate (the base of the keychain) and a logo that needs to be applied to this plate so that the letters are raised and clear when printed with a 0.4 mm nozzle.
We are looking for a specialist who professionally engages in optimizing high-polygon car models for GTA V. Our main task is to obtain models that combine maximum performance with the highest possible visual quality. If you can find this balance, we would be happy to establish a long-term collaboration. Main Responsibilities Performing retopology of car models. Optimizing the polygon mesh to an optimal number of triangles without noticeable loss of quality. Re-baking textures (Normal, AO, Curvature, and others) after optimization. Preserving proportions, geometry, and all key details of the car. Optimizing textures, materials, and model structure according to the requirements of GTA V. Creating LOD levels. Preparing collisions. Preparing the model fully ready for integration into GTA V. Our Expectations Practical experience in retopology and optimization of 3D car models. Proficient use of Blender or other professional 3D packages. Experience with baking PBR textures. Understanding the principles of model optimization for real-time games. Experience preparing vehicles specifically for GTA V will be a significant advantage. Understanding the specifics of LOD, collisions, materials, textures, and the limitations of the GTA V engine. Ability to work quickly without sacrificing quality. What We Provide Source car models. Constant workflow. Long-term collaboration. Competitive payment depending on the complexity of the model and quality of execution. Important For us, quality and speed are equally important. The final result must be maximally optimized for GTA V, have clean topology, optimized textures, correctly configured materials, while preserving the appearance of both the exterior and interior of the car as much as possible. We are looking for a specialist who can regularly prepare high-quality models without the need for additional revisions after submission. Please propose a cost per car and indicate the time frame in which you can complete the work.
A case for the printed circuit board needs to be made, optimized for 3D printing (I mean to consider shrinkage, I will be printing with PETG plastic). The case should consist of 2 parts and be screwed together with M3 screws (with a place for a nut on the other side). Photos of the actual board and the step file are attached in the announcement. The only difference between the model and the board is the LEDs; they have a diameter of 5mm and are soldered in such a way that the center of the LED lens is aligned with the center of the button. USB_CAN_SD_F103.step.png - this is the step file, the .png needs to be removed from the name (otherwise it cannot be added to the announcement). I expect an assembly from the attached step file and the case with 2 parts - so that the functionality can be checked without printing.
Welcome! The company Adaptis needs to update graphic materials for A+ content on our website and on Amazon. We already have a fully prepared design for A+ content (cards, banners, infographics), but they depict a different shape of our product. We have changed the product design and now have its new 3D model. The main task is to create realistic renders of the new product shape and carefully "fit" them into the existing banners instead of the old shape. And immediately your cases